Removing A Memory Module - Sony VAIO PCV-E204 Reference Manual

Removing a Memory Module

You may need to remove a memory module if you change the memory
configuration or replace a bad module.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
1
Remove the left side panel (see
page 22).
2
Remove the bottom panel (see
page 23).
3
Remove the front panel (see
4
Slide the diskette drive out approximately two inches (see
"Detaching the Diskette Drive"
5
Remove any add-in cards (see
page 29) and other components as needed to access the memory
modules.
6
Locate the memory module you wish to remove.
Removing, Installing, and Replacing Components
"Removing the Bottom Panel"
"Removing the Front Panel"
"Removing an Add-in Card"
"Removing the Left Side Panel" on
on page 39).
37
on
on page 24).
on
KY0073.VSD