Chevrolet 1993 Astro Passenger Owner's Manual page 49

1. Make the belt as long as possible by tilting the latch plate and pulling it
2.
Put the restraint on the seat. Follow the instructions for the child
3. Secure the child in the child restraint as the instructions say.
along the belt.
restraint.
4.
Run the vehicle's
AM1
WJUI
3
safety belt through
AM1 6301 9R1
or around the restraint. The child
restraint instructions will show you how.
so you'll be able
to unbuckle it quickly if you ever need to.
restraint.
5. Buckle the belt. Make sure the release button faces upward or outward,
6. To tighten the belt, pull its free end while you push down
on
the child
7. Push and pull the child restraint in different directions to be sure it is
secure. If the child restraint isn't secure, turn the latch plate over and
buckle it again. Then see if it is secure. If it isn't, secure the restraint in
a different place in the vehicle and contact the child restraint maker for
their advice.
To remove the child restraint, just unbuckle the vehicle's safety belt.
It
will be ready to work for an adult or larger child passenger.
1-37