Service & Appearance Care
I
PO403
4. Remove the four retainer screws and the retainer.
5,
Pull the connector out and unplug the light.
6. Install the new bulb into the connector.
7.
Reverse steps 1-5 to reinstall the headlight.
Front ParkingFurn Signal Lights
1. Open the hood.
2.
Remove the four Torxhead screws from the
headlight bezel. Pull the
bezel out so you can see the parkinglturn signal lights.
! $
3
: K
> :
.
. -
- .
6-36
PO401