Recommended Fluids And Lubricants - Cadillac 2010 DTS Owner's Manual

Parking Brake and Automatic
Transmission P (Park)
Mechanism Check
WARNING:
{
When you are doing this check, the vehicle could
begin to move. You or others could be injured and
property could be damaged. Make sure there is
room in front of the vehicle in case it begins to roll.
Be ready to apply the regular brake at once
should the vehicle begin to move.
Park on a fairly steep hill, with the vehicle facing
downhill. Keeping your foot on the regular brake, set the
parking brake.
•
To check the parking brake's holding ability:
With the engine running and the transmission
in N (Neutral), slowly remove foot pressure from the
regular brake pedal. Do this until the vehicle is
held by the parking brake only.
•
To check the P (Park) mechanism's holding ability:
With the engine running, shift to P (Park). Then
release the parking brake followed by the
regular brake.
Contact your dealer/retailer if service is required.
7-8
Recommended Fluids and
Lubricants
Fluids and lubricants identified below by name, part
number, or specification can be obtained from your
dealer/retailer.
Usage
The engine requires a special
engine oil meeting GM Standard
GM4718M. Oils meeting this
standard can be identified as
synthetic, and should also be
identified with the American
Petroleum Institute (API) Certified
Engine Oil for Gasoline Engines starburst
symbol. However, not all synthetic
API oils with the starburst symbol
will meet this GM standard. Look for
and use only oil that meets GM
Standard GM4718M. For the proper
viscosity, see Engine Oil on
page 6-13.
50/50 mixture of clean, drinkable
water and use only DEX-COOL
Engine Coolant
Coolant. See Engine Coolant on
page 6-23.
DOT 3 Hydraulic Brake Fluid
Hydraulic Brake
(GM Part No. U.S. 88862806, in
System
Canada 88862807).
Fluid/Lubricant
®