Power Reclining Seatbacks - Cadillac 2007 XLR Owner's Manual

Two personalized exit positions can be set by first
recalling the driving position (by pressing 1 or 2),
then positioning the steering wheel and seat in the
desired exit positions and then pressing and
holding the exit button until two beeps are heard.
The exit button is located between buttons 1 and 2.
With the vehicle in PARK (P), the exit position
for the previously set driver can be recalled
by pressing the exit button.
When you use the keyless access transmitter to
unlock your vehicle, automatic seat and steering
wheel movement to the exit position may
occur. The numbers on the back of the
transmitter, 1 and 2, corresponds to the numbers
on the memory buttons.
Further programming for automatic seat and mirror
movement can be done using the Driver
Information Center (DIC).
For programming information, see DIC Vehicle
Personalization on page 220.

Power Reclining Seatbacks

Use the vertical power seat control located on the
outboard side of the seat to operate them.
•
To recline the seatback, press the control
toward the rear of the vehicle.
•
To raise the seatback, press the control
toward the front of the vehicle.
Your seats have power
reclining seatbacks.
11