Download Print this page

Cadillac 2007 XLR Owner's Manual

Cadillac 2007 XLR Owner's Manual

Hide thumbs Also See for 2007 XLR:

Specifications (2 pages)

page of 512

/ 512
Contents
Table of Contents
Bookmarks

Table of Contents

Advertisement

Quick Links

Download this manual

2007 Cadillac XLR/XLR-V Owner Manual

Seats and Restraint Systems ....................... 7

.............................................. 8

............................................ 13

Child Restraints

........................................ 44

Restraint System Check

Features and Controls ................................ 63

....................................................... 65

Doors and Locks

................................................ 81

Theft-Deterrent Systems

Starting and Operating Your Vehicle

.................................................. 104

®

Universal Home Remote System

...................................... 121

Retractable Hardtop

...................................... 28

......................... 60

.................................... 73

......................... 84

....... 87

................................... 107

.......... 110

.............................. 124

Instrument Panel ....................................... 135

Instrument Panel Overview

Climate Controls

Warning Lights, Gages, and

.......................................... 185

Driver Information Center (DIC)

...................................... 224

Audio System(s)

Navigation System ..................................... 231

.............................................. 232

Features and Controls

Navigation Audio System

Voice Recognition

Driving Your Vehicle ................................. 321

Your Driving, the Road, and

..................................... 322

................................................. 359

M

................... 138

................................... 178

............ 203

................................... 225

.......................... 240

...................... 285

................................. 312

1

Advertisement

Chapters

Table of Contents

Need help?

Need help?

Do you have a question about the 2007 XLR and is the answer not in the manual?

Questions and answers

Carl Barnett

July 15, 2025

how do you open the door when the battery is dead?

0

Gerry

May 2, 2025

There is an arrow on the inside of each wheel hub. How to line up the arrow when returning the hub to the wheel?

0

Summary of Contents for Cadillac 2007 XLR

Page 1: Table Of Contents
2007 Cadillac XLR/XLR-V Owner Manual Seats and Restraint Systems ... 7 Front Seats ... 8 Safety Belts ... 13 Child Restraints ... 28 Airbag System ... 44 Restraint System Check Features and Controls ... 63 Keys ... 65 Doors and Locks ...
Page 2 Service and Appearance Care ... 361 Service ... 363 Fuel ... 365 Checking Things Under the Hood Rear Axle ... 407 Headlamp Aiming ... 408 Bulb Replacement ... 412 Windshield Replacement Windshield Wiper Blade Replacement ... 412 Tires ... 413 Appearance Care ...
Page 3: Canadian Owners
GENERAL MOTORS, GM, the GM Emblem, CADILLAC, the CADILLAC Crest & Wreath, and the name XLR are registered trademarks of General Motors Corporation. This manual includes the latest information at the time it was printed. We reserve the right to make changes after that time to the product without notice.
Page 4: How To Use This Manual
How to Use This Manual Many people read the owner manual from beginning to end when they ﬁrst receive their new vehicle. If this is done, it can help you learn about the features and controls for the vehicle. Pictures and words work together in the owner manual to explain things.
Page 5: Vehicle Damage Warnings
Vehicle Damage Warnings Also, in this manual you will ﬁnd these notices: Notice: These mean there is something that could damage your vehicle. A notice tells about something that can damage the vehicle. Many times, this damage would not be covered by your vehicle’s warranty, and it could be costly.
Page 6 These are some examples of symbols that may be found on the vehicle:...
Page 7: Seats And Restraint Systems
Section 1 Front Seats ... 8 Power Seats ... 8 Power Lumbar ... 9 Heated and Cooled Seats ... 9 Memory Seat, Mirrors and Steering Wheel ... 10 Power Reclining Seatbacks ... 11 Safety Belts ... 13 Safety Belts: They Are for Everyone ... 13 Questions and Answers About Safety Belts ...
Page 8: Front Seats
Front Seats Power Seats The power seat controls are located on the outboard side of the seat cushions. • Move the seat forward or rearward by sliding the horizontal control forward or rearward. • Raise or lower the front part of the seat cushion by moving the front of the horizontal control up or down.
Page 9: Power Lumbar
Power Lumbar The driver’s and passenger’s seatback lumbar support switches are located on the outboard sides of the seats. Use the power seat controls ﬁrst to get the proper position, then continue with the lumbar adjustment. Use the top lumbar switch to adjust support to the middle seatback and the bottom lumbar switch to adjust support to the lower seatback.
Page 10: Memory Seat, Mirrors And Steering Wheel
Memory Seat, Mirrors and Steering Wheel Your vehicle is equipped with the memory package. The controls for these features are located on the driver’s seat, and are used to program and recall memory settings for the driver’s seating positions. Use the following steps to program each button: 1.
Page 11: Power Reclining Seatbacks
Two personalized exit positions can be set by ﬁrst recalling the driving position (by pressing 1 or 2), then positioning the steering wheel and seat in the desired exit positions and then pressing and holding the exit button until two beeps are heard. The exit button is located between buttons 1 and 2.
Page 12 CAUTION: Sitting in a reclined position when your vehicle is in motion can be dangerous. Even if you buckle up, your safety belts cannot do their job when you are reclined like this. The shoulder belt cannot do its job. In a crash, you could go into it, receiving neck or other injuries.
Page 13: Safety Belts
Safety Belts Safety Belts: They Are for Everyone This part of the manual tells you how to use safety belts properly. It also tells you some things you should not do with safety belts. CAUTION: Do not let anyone ride where he or she can not wear a safety belt properly.
Page 14: Why Safety Belts Work
You never know if you will be in a crash. If you do have a crash, you do not know if it will be a bad one. A few crashes are mild, and some crashes can be so serious that even buckled up, a person would not survive.
Page 15 Put someone on it. Get it up to speed. Then stop the vehicle. The rider does not stop.
Page 16 The person keeps going until stopped by or the instrument panel... something. In a real vehicle, it could be the windshield...
Page 17: Questions And Answers About Safety Belts
or the safety belts! With safety belts, you slow down as the vehicle does. You get more time to stop. You stop over more distance, and your strongest bones take the forces. That is why safety belts make such good sense. Questions and Answers About Safety Belts Will I be trapped in the vehicle after an...
Page 18: How To Wear Safety Belts Properly
If I am a good driver, and I never drive far from home, why should I wear safety belts? You may be an excellent driver, but if you are in an accident — even one that is not your fault — you and your passenger can be hurt. Being a good driver does not protect you from things beyond your control, such as bad drivers.
Page 19 3. Pick up the latch plate and pull the belt across you. Do not let it get twisted. The lap-shoulder belt may lock if you pull the belt across you very quickly. If this happens, let the belt go back slightly to unlock it. Then pull the belt across you more slowly.
Page 20 The lap part of the belt should be worn low and snug on the hips, just touching the thighs. In a crash, this applies force to the strong pelvic bones. And you would be less likely to slide under the lap belt. If you slid under it, the belt would apply force at your abdomen.
Page 21 What is wrong with this? The shoulder belt is too loose. It will not give nearly as much protection this way. CAUTION: You can be seriously hurt if your shoulder belt is too loose. In a crash, you would move forward too much, which could increase injury.
Page 22 What is wrong with this? The lap belt is too loose. It will not give nearly as much protection this way. CAUTION: You can be seriously hurt if your lap belt is too loose. In a crash, you could slide under the lap belt and apply force at your abdomen.
Page 23 What is wrong with this? The belt is buckled in the wrong place. CAUTION: You can be seriously injured if your belt is buckled in the wrong place like this. In a crash, the belt would go up over your abdomen.
Page 24 What is wrong with this? The shoulder belt is worn under the arm. It should be worn over the shoulder at all times. CAUTION: You can be seriously injured if you wear the shoulder belt under your arm. In a crash, your body would move too far forward, which would increase the chance of head and neck injury.
Page 25 What is wrong with this? The belt is twisted across the body. CAUTION: You can be seriously injured by a twisted belt. In a crash, you would not have the full width of the belt to spread impact forces. If a belt is twisted, make it straight so it can work properly, or ask your dealer to ﬁx it.
Page 26: Safety Belt Use During Pregnancy
To unlatch the belt, push the button on the buckle. The belt should go back out of the way. Before you close the door, be sure the belt is out of the way. If you slam the door on it, you can damage both the belt and your vehicle.
Page 27: Passenger Position
Passenger Position To learn how to wear the passenger’s safety belt properly, see Driver Position on page 18. The passenger’s safety belt works the same way as the driver’s safety belt — except for one thing. If you ever pull the shoulder portion of the belt out all the way, you will engage the child restraint locking feature.
Page 28: Child Restraints
Child Restraints Older Children Older children who have outgrown booster seats should wear the vehicle’s safety belts. What is the proper way to wear safety belts? If possible, an older child should wear a lap-shoulder belt and get the additional restraint a shoulder belt can provide.
Page 29 CAUTION: Never do this. Here two children are wearing the same belt. The belt can not properly spread the impact forces. In a crash, the two children can be crushed together and seriously injured. A belt must be used by only one person at a time.
Page 30 What if a child is wearing a lap-shoulder belt, but the child is so small that the shoulder belt is very close to the child’s face or neck? Move the child toward the center of the vehicle, but be sure that the shoulder belt still is on the child’s shoulder, so that in a crash the child’s upper body would have the restraint that belts provide.
Page 31: Infants And Young Children
Infants and Young Children Everyone in a vehicle needs protection! This includes infants and all other children. Neither the distance traveled nor the age and size of the traveler changes the need, for everyone, to use safety restraints. In fact, the law in every state in the United States and in every Canadian province says children up to some age must be restrained while in a vehicle.
Page 32 CAUTION: People should never hold a baby in their arms while riding in a vehicle. A baby does not weigh much — until a crash. During a crash a baby will become so heavy it is not possible to hold it. For example, in a crash at only 25 mph (40 km/h), a 12 lb (5.5 kg) baby will suddenly become a 240 lb (110 kg) force...
Page 33 CAUTION: Children who are up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer protection for adults and older children, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 34 The restraint manufacturer’s instructions that come with the restraint state the weight and height limitations for a particular child restraint. In addition, there are many kinds of restraints available for children with special needs. CAUTION: Newborn infants need complete support, including support for the head and neck.
Page 35: Child Restraint Systems
Child Restraint Systems An infant car bed (A), a special bed made for use in a motor vehicle, is an infant restraint system designed to restrain or position a child on a continuous ﬂat surface. Make sure that the infant’s head rests toward the center of the vehicle.
Page 36 A forward-facing child seat (C-E) provides restraint for the child’s body with the harness and also sometimes with surfaces such as T-shaped or shelf-like shields. A booster seat (F-G) is a child restraint designed to improve the ﬁt of the vehicle’s safety belt system.
Page 37 How Should I Use a Child Restraint? A child restraint system is any device designed for use in a motor vehicle to restrain, seat, or position children. A built-in child restraint system is a permanent part of the motor vehicle. An add-on child restraint system is a portable one, which is purchased by the vehicle’s owner.
Page 38: Securing The Child Within The Child Restraint
When securing an add-on child restraint, refer to the instructions that come with the restraint which may be on the restraint itself or in a booklet, or both, and to this manual. The child restraint instructions are important, so if they are not available, obtain a replacement copy from the manufacturer.
Page 39: Lower Anchors And Tethers For Children (Latch)
Lower Anchors and Tethers for Children (LATCH) Some child restraints have a LATCH system. As part of the LATCH system, your child restraint may have lower attachments and/or a top tether. The LATCH system can help hold the child restraint in place during driving or in a crash.
Page 40: Securing A Child Restraint In The Passenger Seat Position
Securing a Child Restraint in the Passenger Seat Position Your vehicle has a right front passenger airbag. In addition, your vehicle has the passenger sensing system. The passenger sensing system is designed to turn off the right front passenger’s frontal airbag and side impact airbag when an infant in a rear-facing infant seat or a small child in a forward-facing child restraint or booster seat is detected.
Page 41 CAUTION: (Continued) no system is fail-safe, and no one can guarantee that an airbag will not deploy under some unusual circumstance, even though it is turned off. We recommend that rear-facing child restraints be transported in vehicles with a rear seat that will accommodate a rear-facing child restraint, whenever possible.
Page 42 3. Pick up the latch plate, and run the lap and shoulder portions of the vehicle’s safety belt through or around the restraint. The child restraint instructions will show you how. 4. Buckle the belt. Make sure the release button is positioned so you would be able to unbuckle the safety belt quickly if you ever had to.
Page 43 6. To tighten the belt, push down on the child restraint, pull the shoulder portion of the belt to tighten the lap portion of the belt, and feed the shoulder belt back into the retractor. If you are using a forward-facing child restraint, you may ﬁnd it helpful to use your knee to push down on the child restraint as you tighten the belt.
Page 44: Airbag System
Airbag System Your vehicle has a frontal airbag for the driver, a frontal airbag for the passenger, a side impact airbag for the driver, and a side impact airbag for the passenger. Airbags are designed to supplement the protection provided by safety belts. Even though today’s airbags are also designed to help reduce the risk of injury from the force of an inﬂating bag, all airbags must inﬂate very quickly to do their job.
Page 45 CAUTION: Frontal airbags for the driver and passenger are designed to deploy in moderate to severe frontal and near frontal crashes. They are not designed to inﬂate in rollover, rear crashes, or in many side crashes. And, for some unrestrained occupants, frontal airbags may provide less protection in frontal crashes than more forceful airbags have provided in...
Page 46 CAUTION: Anyone who is up against, or very close to, any airbag when it inﬂates can be seriously injured or killed. Airbags plus lap-shoulder belts offer the best protection for adults, but not for young children and infants. Neither the vehicle’s safety belt system nor its airbag system is designed for them.
Page 47: Where Are The Airbags
Where Are the Airbags? The driver’s frontal airbag is in the middle of the steering wheel. The passenger’s frontal airbag is in the instrument panel on the passenger’s side.
Page 48 The driver’s side impact airbag is in the side of the driver’s seatback closest to the door. The passenger’s side impact airbag is in the side of the passenger’s seatback closest to the door.
Page 49: When Should An Airbag Inﬂate
CAUTION: If something is between an occupant and an airbag, the airbag might not inﬂate properly or it might force the object into that person causing severe injury or even death. The path of an inﬂating airbag must be kept clear. Do not put anything between an occupant and an airbag, and do not attach or put anything on the steering wheel hub or on or near any...
Page 50 Frontal airbags may inﬂate at different crash speeds. For example: • If the vehicle hits a stationary object, the airbags could inﬂate at a different crash speed than if the vehicle hits a moving object. • If the vehicle hits an object that deforms, the airbags could inﬂate at a different crash speed than if the vehicle hits an object that does not deform.
Page 51: What Makes An Airbag Inﬂate
What Makes an Airbag Inﬂate? In an impact of sufficient severity, the airbag sensing system detects that the vehicle is in a crash. The sensing system triggers a release of gas from the inﬂator, which inﬂates the airbag. The inﬂator, the airbag and related hardware are all part of the airbag modules.
Page 52: What Will You See After An Airbag Inflates
What Will You See After an Airbag Inﬂates? After an airbag inﬂates, it quickly deﬂates, so quickly that some people may not even realize the airbag inﬂated. Some components of the airbag module — the steering wheel hub for the driver’s frontal airbag, the instrument panel for the right front passenger’s frontal airbag, and for seating positions with side impact airbags, the side...
Page 53: Passenger Sensing System
In many crashes severe enough to inﬂate an airbag, windshields are broken by vehicle deformation. Additional windshield breakage may also occur from the right front passenger airbag. • Airbags are designed to inﬂate only once. After they inﬂate, you will need some new parts for the airbag system.
Page 54 The passenger sensing system will turn off the passenger’s frontal airbag and side impact airbag under certain conditions. The driver’s airbags are not part of the passenger sensing system. The passenger sensing system works with sensors that are part of the passenger’s seat and safety belt.
Page 55 CAUTION: (Continued) rear-facing child restraints be transported in vehicles with a rear seat that will accommodate a rear-facing child restraint, whenever possible. If you need to secure a forward-facing child restraint in the passenger’s seat, always move the passenger’s seat as far back as it will go.
Page 56 The passenger sensing system is designed to enable (may inﬂate) the passenger’s frontal airbag and side impact airbag anytime the system senses that a person of adult size is sitting properly in the passenger’s seat. When the passenger sensing system has allowed the airbags to be enabled, the on indicator will light and stay lit to remind you that the airbags are active.
Page 57 CAUTION: If the airbag readiness light in the instrument panel cluster ever comes on and stays on, it means that something may be wrong with the airbag system. If this ever happens, have the vehicle serviced promptly, because an adult-size person sitting in the right front passenger’s seat may not have the protection of an airbag.
Page 58: Servicing Your Airbag-Equipped Vehicle
Servicing Your Airbag-Equipped Vehicle Airbags affect how your vehicle should be serviced. There are parts of the airbag system in several places around your vehicle. You do not want the system to inﬂate while someone is working on your vehicle. Your dealer and the service manual have information about servicing your vehicle and the airbag system.
Page 59: Adding Equipment To Your Airbag-Equipped Vehicle
Adding Equipment to Your Airbag-Equipped Vehicle Is there anything I might add to the front or sides of the vehicle that could keep the airbags from working properly? Yes. If you add things that change your vehicle’s frame, bumper system, height, front end or side sheet metal, they may keep the airbag system from working properly.
Page 60: Restraint System Check
Restraint System Check Checking the Restraint Systems Now and then, make sure the safety belt reminder light and all your belts, buckles, latch plates, retractors and anchorages are working properly. Look for any other loose or damaged safety belt system parts. If you see anything that might keep a safety belt system from doing its job, have it repaired.
Page 61: Replacing Restraint System Parts After A Crash
Replacing Restraint System Parts After a Crash CAUTION: A crash can damage the restraint systems in your vehicle. A damaged restraint system may not properly protect the person using it, resulting in serious injury or even death in a crash. To help make sure your restraint systems are working properly after a crash, have them inspected and any necessary...
Page 62 NOTES...
Page 63: Features And Controls
Section 2 Keys ... 65 Keyless Access System ... 67 Keyless Access System Operation ... 68 Doors and Locks ... 73 Door Locks ... 73 Power Door Locks ... 75 Automatic Door Lock ... 76 Programmable Automatic Door Unlock ... 76 Lockout Protection ...
Page 64 Section 2 Storage Areas ... 121 Glove Box ... 121 Cupholder(s) ... 122 Center Console Storage Area ... 122 Map Pocket ... 122 Features and Controls Floor Mats ... 122 Rear Storage Area ... 123 Convenience Net ... 123 Retractable Hardtop ... 124 Lowering the Retractable Hardtop ...
Page 65: Keys
Keys CAUTION: Leaving children unattended in a vehicle is dangerous, but it is even more dangerous if the keyless access transmitter is also left in the vehicle. A child or others could be badly injured or even killed. They could operate the power windows or other controls or even make the vehicle move.
Page 66 You may even have to damage your vehicle to get in. Be sure you have a spare transmitter and/or key. In an emergency, contact Cadillac Roadside Assistance. See Roadside Service on page 487.
Page 67: Keyless Access System
Keyless Access System Your vehicle has a Keyless Access System that operates on a radio frequency subject to Federal Communications Commission (FCC) Rules and with Industry Canada. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1.
Page 68: Keyless Access System Operation
If you ever notice a decrease in the keyless access transmitter range, try doing one of the following: • Check the distance. You may be too far from your vehicle. You may need to stand closer during rainy or snowy weather. •...
Page 69: Matching Transmitter(S) To Your Vehicle
(Unlock): Press this button once to unlock the driver’s door. The indicator light on the door will ﬂash twice. Press the button twice within 10 seconds to unlock both doors. If it is dark enough outside, your interior lamps will come on. Your memory settings may also be recalled when you press the unlock button on the keyless access transmitter.
Page 70 5. Turn the key ﬁve times within ﬁve seconds. 6. The Driver Information Center (DIC) will display READY FOR FOB #X. X can be 2, 3 or 4. 7. Place the new, unrecognized transmitter in the glove box transmitter pocket with the buttons facing to the right.
Page 71 3. Go to the rear of the vehicle and insert the vehicle key into the key cylinder located on the lower rear fascia on the driver’s side of the vehicle. See Trunk on page 77 for more information on the key cylinder. 4.
Page 72: Battery Replacement
Battery Replacement Under normal use, the battery in your keyless access transmitter should last about three years. You can tell the battery is weak if the transmitter will not work at the normal range in any location. If you have to get close to your vehicle before the transmitter works, it is probably time to change the battery.
Page 73: Doors And Locks
Doors and Locks Door Locks CAUTION: Unlocked doors can be dangerous. • Passengers — especially children — can easily open the doors and fall out of a moving vehicle. When a door is locked it will not open. You increase the chance of being thrown out of the vehicle in a crash if the doors are not locked.
Page 74 From the inside, use the power door lock buttons located at the top of the door panel near the window. See Power Door Locks on page 75 for more information. To open a door from the inside, press the button in front of the door handle and push the door open.
Page 75: Power Door Locks
If you are outside the vehicle, there is a door release tab in the trunk. The tab is located behind a panel on the driver’s side of the trunk. Pull the handle to unlock and unlatch the driver’s door. See Trunk on page 77 for information on opening the trunk during a loss of power.
Page 76: Automatic Door Lock
When the unlock portion of the button is pressed and the door is closed, a beep will sound and the light will ﬂash twice. When the button is pressed and the door is open, a beep will sound and the light will ﬂash. Automatic Door Lock Your vehicle is programmed so that, when the doors are closed, the ignition is on and the...
Page 77: Lockout Protection
Lockout Protection Your vehicle can be programmed to sound the horn three times and unlock the driver’s door when both doors are closed and there is a keyless access transmitter inside the vehicle. When the driver’s door is opened, a reminder chime will sound continuously.
Page 78: Trunk Lock Release
Trunk Lock Release CAUTION: Moving parts of the powered trunk lid can be dangerous. You or others could be injured. Keep yourself and others away from the trunk lid and its mechanism while it is closing. The trunk lock release button is located to the left of the steering wheel on the instrument...
Page 79 To stop the trunk lid while it is closing, do one of the following: • Press the trunk lock release button located on the instrument panel. • Use the vehicle key. • Squeeze the trunk release sensor located on the rear of the trunk lid. •...
Page 80: Emergency Trunk Release Handle
Emergency Trunk Release Handle Notice: Do not use the emergency trunk release handle as a tie-down or anchor point when securing items in the trunk as it could damage the handle. The emergency trunk release handle is only intended to aid a person trapped in a latched trunk, enabling them to open the trunk from the inside.
Page 81: Windows
Windows CAUTION: Leaving children, helpless adults, or pets in a vehicle with the windows closed is dangerous. They can be overcome by the extreme heat and suffer permanent injuries or even death from heat stroke. Never leave a child, a helpless adult, or a pet alone in a vehicle, especially with the windows closed in warm or hot weather.
Page 82: Power Windows
Power Windows The power window switches are located on each door near the armrest. Press the up or down arrows on the switches to raise or lower the windows. Your vehicle has Retained Accessory Power (RAP) that allows you to use the power windows once the ignition has been turned off.
Page 83: Express-Up Window
Express-Up Window This feature is on both power windows. Press the up arrow on the switch to the second position to activate the express-up feature. If you want to stop the window as it is raising, press the switch again. Express Window Anti-Pinch Feature If any object is in the path of the window when the express-up is active, the window will stop at the...
Page 84: Theft-Deterrent Systems
Window Indexing This feature automatically lowers the window a small amount when the door is opened. Then, when the door is closed, the window will raise to its full up position. Sun Visors Notice: Raising or lowering the retractable hardtop with the visor or the visor vanity mirror cover up, may cause damage to the visor or mirror cover.
Page 85: Arming The System
Arming the System Use one of the three following items listed here to arm the system: • Press the lock button on the keyless access transmitter. • Open the door. Lock the door with the power door lock switch. The security light should ﬂash.
Page 86: Testing The Alarm
Testing the Alarm Do the following to test the system: 1. Make sure the trunk lid is latched. 2. Lower the window on the driver’s door. 3. Manually arm the system. 4. Close the doors and wait 30 seconds. 5. Reach through the open window and manually pull the release lever on the ﬂoor.
Page 87: Starting And Operating Your Vehicle
Starting and Operating Your Vehicle New Vehicle Break-In Notice: Your vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines: • Keep your speed at 55 mph (88 km/h) or less for the ﬁrst 500 miles (805 km).
Page 88: Ignition Positions
Ignition Positions Your vehicle has an electronic keyless ignition with pushbutton start. (START): Press this button while your foot is on the brake to start the engine. The shifter must be in PARK (P) or NEUTRAL (N) to start the engine and the keyless access transmitter must be in the vehicle for the ignition to work.
Page 89: Retained Accessory Power (Rap)
Retained Accessory Power (RAP) The following accessories on your vehicle may be used for up to 10 minutes after the engine is turned off: • Radio • Power Windows • Audio Steering Wheel Controls Power to these accessories stops after 10 minutes or if a door is opened.
Page 90 To start you vehicle, do the following: 1. With your foot on the brake pedal, press the START button located on the instrument panel. If there is not a keyless access transmitter in the vehicle or if there is something causing interference with it, the DIC will display NO FOB DETECTED.
Page 91 Notice: Cranking the engine for long periods of time, by pressing the START button immediately after cranking has ended, can overheat and damage the cranking motor, and drain the battery. Wait at least 15 seconds between each try, to allow the cranking motor to cool down.
Page 92: Automatic Transmission Operation
Automatic Transmission Operation There are several different positions for the shift lever. PARK (P): This position locks the rear wheels. It is the best position to use when you starting the engine because your vehicle cannot move easily. CAUTION: It is dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set.
Page 93 If you cannot shift out of PARK (P), ease pressure on the shift lever and push the shift lever all the way into PARK (P) as you maintain brake application. Then press the shift lever button and move the shift lever into another gear. See Shifting Out of Park (P) on page 100.
Page 94: Driver Shift Control (Dsc)
DRIVE (D): This position is for normal driving. It provides the best fuel economy for your vehicle. If you need more power for passing and you are: • Going less than about 35 mph (56 km/h), push the accelerator pedal about halfway down. •...
Page 95 The Sport Automatic Mode is selected by moving the shift lever into the DSC area without shifting towards the +(plus) or (minus) symbols. While in the Sport Automatic Mode, the transmission computer determines when the vehicle is being driven in a competitive manner. It then selects and holds the transmission in lower gears giving more noticeable upshifts for a sportier vehicle performance.
Page 96 Not all manual downshift requests will be allowed by the transmission. To prevent excessive engine RPMs, each gear has a maximum vehicle speed associated with it. Any downshift request above this speed is not allowed by the transmission. If shifting is prevented for any reason, the current gear ﬂashes multiple times in the Driver Information Center (DIC), indicating that the transmission has not shifted gears.
Page 97: Parking Brake
Parking Brake The parking brake pedal is located to the left of the regular brake pedal, near the driver’s door. To set the parking brake, hold the regular brake pedal down with your right foot and push the parking brake pedal down with your left foot. If the ignition is on, the parking brake indicator light on the instrument panel cluster should come on.
Page 98 Reach under the driver’s side of the instrument panel and pull down on the manual release lever, which is located behind the parking brake pedal. Pull down on the yellow tab. If the parking brake does not release, you should have your vehicle towed to your dealer for service.
Page 99: Shifting Into Park (P)
Shifting Into Park (P) CAUTION: It can be dangerous to get out of your vehicle if the shift lever is not fully in PARK (P) with the parking brake ﬁrmly set. Your vehicle can roll. If you have left the engine running, the vehicle can move suddenly.
Page 100: Torque Lock
Torque Lock If you are parking on a hill and you do not shift your transmission into PARK (P) properly, the weight of the vehicle may put too much force on the parking pawl in the transmission. You may ﬁnd it difficult to pull the shift lever out of PARK (P).
Page 101: Parking Over Things That Burn
Parking Over Things That Burn CAUTION: Things that can burn could touch hot exhaust parts under your vehicle and ignite. Do not park over papers, leaves, dry grass, or other things that can burn.
Page 102: Engine Exhaust
Engine Exhaust CAUTION: Engine exhaust can kill. It contains the gas carbon monoxide (CO), which you cannot see or smell. It can cause unconsciousness and death. You might have exhaust coming in if: • Your exhaust system sounds strange or different. •...
Page 103: Running The Engine While Parked
Running the Engine While Parked It is better not to park with the engine running. But if you ever have to, here are some things to know. CAUTION: Idling the engine with the climate control system off could allow dangerous exhaust into your vehicle.
Page 104: Mirrors
Mirrors Automatic Dimming Rearview Mirror ® with OnStar Your vehicle has an automatic dimming inside rearview mirror. The mirror also contains OnStar controls. For more information about OnStar ® see OnStar System on page 107. (On/Off): This button, located on the lower left side of the mirror, is for the automatic dimming functions.
Page 105: Outside Power Heated Mirrors
Outside Power Heated Mirrors The controls for the outside power mirrors are located is on the driver’s door armrest. Move the selector switch, located below the four-way control pad, to the left or the right to choose the driver’s side or passenger’s side mirror. Use the arrows located on the four-way control pad to adjust the position of the mirror.
Page 106: Outside Curb View Assist Mirror
Outside Curb View Assist Mirror The passenger’s side mirror is also capable of performing the curb view assist feature. This feature will cause the mirror to tilt to a factory programmed position when the vehicle is in REVERSE (R). This feature may be useful in allowing you to view the curb when you are parallel parking.
Page 107: Onstar ® System
® OnStar System ® OnStar uses several innovative technologies and live advisors to provide you with a wide range of safety, security, information, and convenience services. If your airbags deploy, the system is designed to make an automatic call to OnStar Emergency advisors who can request emergency services be sent to your location.
Page 108 Available Services with Safe & ® Sound Plan • Automatic Notiﬁcation of Airbag Deployment • Advanced Automatic Crash Notiﬁcation (AACN) (If equipped) • Link to Emergency Services • Roadside Assistance • Stolen Vehicle Location Assistance • AccidentAssist • Remote Door Unlock/Vehicle Alert ®...
Page 109 ® OnStar Virtual Advisor ® OnStar Virtual Advisor is a feature of OnStar Hands-Free Calling that uses your minutes to access location-based weather, local traffic reports, and stock quotes. By pressing the phone button and giving a few simple voice commands, you can browse through the various topics.
Page 110: Universal Home Remote System
® OnStar service cannot work unless your vehicle ® is in a place where OnStar has an agreement with a wireless service provider for service in that ® area. OnStar service also cannot work unless you are in a place where the wireless service ®...
Page 111: Universal Home Remote System (With Three Round Led)
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference. 2. This device must accept any interference received, including interference that may cause undesired operation. The FCC Grant of Equipment Authorization Certiﬁcate number is CB2SAHL3.
Page 112: Universal Home Remote System Operation (With Three Round Led)
This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference received, including interference that may cause undesired operation of the device. The Canadian Registration ID number is 3521A-GTV06A.
Page 113 Do not use the this system with any garage door opener that does not have the stop and reverse feature. This includes any garage door opener model manufactured before April 1, 1982. Read the instructions completely before attempting to program the transmitter. Because of the steps involved, it may be helpful to have another person available to assist you in programming the transmitter.
Page 114 Programming Universal Home Remote — Fixed Code Fixed Code garage door openers are used for garage doors produced prior to 1996. Fixed code uses the same coded signal every time, which is manually programmed by setting DIP switches for a unique personal code. To program up to three channels, 1.
Page 115 4. The indicator light will blink slowly. In order from left to right, and within two and one-half minutes, enter each switch setting into the Universal Home Remote System. Push one button for each switch as follows: • Left button = “on” switch position. •...
Page 116 Programming Universal Home Remote — Rolling Code Rolling code garage door openers are used for garage doors produced after 1996 and are code protected. Rolling code means the coded signal is changed every time your remote control garage door opener is used. Programming a rolling code garage door opener involves time-sensitive actions, so read the entire procedure before you begin.
Page 117: Using Universal Home Remote
3. Press and hold the button you would like to use to control the garage door until the garage door moves. The indicator light, above the selected button, should slowly blink. You may need to hold the button from ﬁve to 20 seconds.
Page 118: Universal Home Remote System Operation (With One Triangular Led)
Universal Home Remote System Operation (With One Triangular LED) Your vehicle may have the Universal Home Remote System. If there is one triangular Light Emitting Diode (LED) above the Universal Home Remote buttons, follow the instructions below. If your vehicle has three round LED above the Universal Home Remote buttons, follow the instructions under Universal Home Remote System Operation (With three round LED).
Page 119 Programming Universal Home Remote Follow these steps to program up to three channels: 1. Press and hold down the two outside Universal Home Remote buttons, releasing only when the Universal Home Remote indicator light begins to ﬂash, after 20 seconds. Do not hold down the buttons for longer than 30 seconds and do not repeat this step to program a second and/or third hand-held transmitter to the remaining...
Page 120: Gate Operator And Canadian Programming
6. Locate in the garage, the garage door opener receiver (motor-head unit). Locate the “Learn” or “Smart” button. This can usually be found where the hanging antenna wire is attached to the motor-head unit. 7. Firmly press and release the “Learn” or “Smart”...
Page 121: Storage Areas
Using Universal Home Remote Press and hold the appropriate Universal Home Remote button for at least half of a second. The indicator light will come on while the signal is being transmitted. Erasing Universal Home Remote Buttons To erase programming from the three Universal Home Remote buttons do the following: 1.
Page 122: Cupholder(S)
Cupholder(s) The cupholders are located under a lid in the front console to the right of the shift lever. Press the left side of the lid and it will open automatically. Center Console Storage Area There is a center console storage area located between the seats.
Page 123: Rear Storage Area
Rear Storage Area There is a cargo divider located in the trunk to keep cargo from getting in the way of the retractable hardtop. The cargo divider must be in place for the top to move. To install the cargo divider, snap the bottom of the divider onto the snaps (B) located on the ﬂoor of the trunk.
Page 124: Retractable Hardtop
Retractable Hardtop The following procedures explain the proper operation of the retractable hardtop. The retractable hardtop will not operate if the valet lockout switch is on. If the retractable hardtop is lowered or raised multiple times, the engine should be running while doing so to prevent drain on the vehicle’s battery.
Page 125: Raising The Retractable Hardtop
5. Push and hold the The windows will automatically lower and the top will automatically lower into the storage area. A chime will sound when the top has lowered completely. If the radio is on, the sound may be muted brieﬂy while the retractable top is lowered.
Page 126 5. Push and hold the After the top is fully raised, release the retractable hardtop button. If you press the button again within ﬁve seconds, the windows will automatically close. If your radio is on, you may notice a brief mute in sound.
Page 127 4. Remove the wrench located inside the passenger’s side storage compartment. 5. Find the hydraulic Notice: Pressing the retractable hardtop button when the hydraulic pump valve is open could damage the pump. Always close the hydraulic pump valve after the retractable hardtop has been closed manually.
Page 128 7. Move the rear tonneau rearward and up to the stored position. Pull from the center of the tonneau to keep pressure even. The rubber bumper on each corner will ﬁt against the underside of the trunk decklid. 8. Push both sides of the rear tonneau over-center link up until they stop to lock the linkage.
Page 129 10. Remove the upright center storage compartment. Use the wrench to remove the four screws holding the storage area in place. 11. Reach behind the square hole and push the front tonneau over-center link up. The front tonneau should pull up easily. If it does not, push the over-center link up more.
Page 130 12. Manually move the front tonneau to the open position. Once the front tonneau is open, fold the side wings in by gently pressing them in. Do not force the wings. If they are hard to move, make sure the front tonneau is open all the way.
Page 131 15. Hold the top in the front and side and lift the 16. Hold the top in the front and the rear and lift top out of the stored position. the top until it is almost closed. Be careful not to pinch your ﬁngers between the rear of the top and the rear window.
Page 132 17. Place your hands on the top and guide the 18. While sitting in the driver’s seat, pull down on top into the closed position. the rear of the top.
Page 133 19. While holding the Turn the wrench counterclockwise until it stops to fully open the latch jaws around the pins. 20. Pull down on the roof with the latch turned open. Turn the wrench clockwise until it stops to lock the top into position. Push up on the roof.
Page 134 NOTES...
Page 135: Instrument Panel
Section 3 Instrument Panel Overview ... 138 Hazard Warning Flashers ... 140 Other Warning Devices ... 140 Horn ... 140 Power Tilt Wheel and Telescopic Steering Column ... 141 Turn Signal/Multifunction Lever ... 141 Turn and Lane-Change Signals ... 142 Headlamp High/Low-Beam Changer ...
Page 136 Section 3 Passenger Airbag Status Indicator ... 189 Charging System Light ... 191 Voltmeter Gage ... 192 Brake System Warning Light ... 192 Anti-Lock Brake System Warning Light ... 193 Traction Control System (TCS) Warning Light ... 194 Engine Coolant Temperature Gage ... 195 Tire Pressure Light ...
Page 137 NOTES...
Page 138: Instrument Panel Overview
Instrument Panel Overview XLR shown, XLR-V similar...
Page 139 The main components of the instrument panel are the following: A. Head-Up Display (HUD) Controls/Instrument Panel Brightness Controls. See Head-Up Display (HUD) on page 171 or Instrument Panel Brightness on page 170. B. Turn Signal/Multifunction Lever. See Turn Signal/Multifunction Lever on page 141.Cruise Control.
Page 140: Hazard Warning Flashers
P. Retractable Hardtop Button. See Retractable Hardtop on page 124. Q. Cupholders. See Cupholder(s) on page 122. R. Cigarette Lighter. See Ashtray(s) and Cigarette Lighter on page 178. S. Climate Controls. See Dual Climate Control System on page 178. T. Audio/Navigation System. See Navigation System Overview on page 232.
Page 141: Power Tilt Wheel And Telescopic Steering Column
Power Tilt Wheel and Telescopic Steering Column The power tilt wheel control is located on the outboard side of the steering column. To operate the power tilt feature, push the control up and the steering wheel will tilt up. Push the control down and the steering wheel will go down.
Page 142: Turn And Lane-Change Signals
• Flash-to-Pass Feature. See Flash-to-Pass on page 143. • Cruise Control. See Cruise Control on page 147. • Exterior Lamps Control. See Exterior Lamps on page 164. Turn and Lane-Change Signals The turn signal has two upward (for right) and two downward (for left) positions.
Page 143: Headlamp High/Low-Beam Changer
Headlamp High/Low-Beam Changer To change the headlamps from low beam to high, push the turn signal lever all the way forward. When the high beams are on, this light on the instrument panel cluster will also be on. To change the headlamps from high to low, pull the lever rearward.
Page 144: Windshield Wipers
Windshield Wipers Use the lever located on the right side of the steering column to operate the windshield wipers. (High Speed): Move the lever to this position for steady wiping at high speed. (Low Speed): Move the lever to this position for steady wiping at low speed.
Page 145: Rainsense™ Wipers
Rainsense™ Wipers Your vehicle has Rainsense™ wipers. The moisture sensor for this feature is mounted on the interior side of the windshield below the rearview mirror and is used to automatically operate the wipers by monitoring the amount of moisture build-up on the windshield.
Page 146: Windshield Washer
When Rainsense™ is active, the headlamps will turn on automatically. If it is dark, they will remain on. See “Wiper-Activated Headlamps” under Exterior Lamps on page 164 for more information. Notice: Do not place stickers or other items on the exterior glass surface directly in front of the moisture sensor.
Page 147: Cruise Control
Cruise Control Your vehicle has cruise control. turns the system off. (On): This position turns the system on. + (Resume/Accelerate): This position makes the vehicle accelerate or resume to a previously set speed. (Set): Press this button at the end of the lever to set the speed.
Page 148 Setting Cruise Control CAUTION: If you leave your cruise control on when you are not using cruise, you might hit a button and go into cruise when you do not want to. You could be startled and even lose control. Keep the cruise control switch off until you want to use cruise control.
Page 149 Increasing Speed While Using Cruise Control There are two ways to go to a higher speed: • Use the accelerator pedal to get to the higher speed. Press the set button at the end of the lever, then release the button and the accelerator pedal.
Page 150: Adaptive Cruise Control
Using Cruise Control on Hills How well your cruise control works on hills depends upon your speed, load and the steepness of the hills. When going up steep hills, you might have to step on the accelerator pedal to maintain your speed. When going downhill, you might have to brake or shift to a lower gear to keep your vehicle’s speed down.
Page 151 Adaptive Cruise Control is an enhancement to traditional cruise control and is not a safety system. It allows you to keep cruise control engaged in moderate traffic conditions without having to constantly reset your cruise control. Adaptive Cruise Control uses radar to detect a vehicle directly ahead in your path, within a distance of 328 ft (100 m), and operates at speeds above 25 mph (40 km/h).
Page 152 CAUTION: • On winding roads, Adaptive Cruise Control may not detect a vehicle ahead. You could crash into a vehicle ahead of you. Do not use Adaptive Cruise Control on winding roads. • Adaptive Cruise Control may not have time to slow your vehicle enough to avoid a crash when you are driving in conditions where vehicles may suddenly slow or stop ahead of you,...
Page 153 (Off): This position turns the system off. (On): This position turns the system on. (Resume/Increase): Push the switch to this symbol to make the vehicle resume to a previously set speed or to increase the set speed when Adaptive Cruise Control is already active. (Set/Decrease): Press this button to set the speed or to decrease the set speed when Adaptive Cruise Control is already active.
Page 154 3. Get up to the speed you want. 4. Press in the set button at the end of the lever and release it. 5. Take your foot off the accelerator pedal. Once Adaptive Cruise Control is set, it may immediately apply the brakes if it detects a vehicle ahead is too close or moving slower than your vehicle.
Page 155 Your vehicle will not reach the set speed until the system determines there is not a vehicle in front of you. At that point, your vehicle speed will increase to the set speed. Decreasing Set Speed While Using Adaptive Cruise Control Press in the set/decrease button on the end of the lever until you reach the lower speed you want, then release it.
Page 156 There are six follow distances to choose from. The follow distance selection ranges from near to far (1 second to 2 seconds follow time). The distance maintained for a selected follow distance will vary based on vehicle speed. The faster the vehicle speed the further back you will follow.
Page 157 Alerting the Driver The alert symbol will ﬂash on the HUD and a warning beep will sound when driver action is required. Driver action is required when: • Adaptive Cruise Control cannot apply sufficient braking because you are approaching a vehicle too rapidly.
Page 158 Approaching and Following a Vehicle The vehicle ahead symbol will only appear on the HUD when a vehicle ahead is detected in your path. If this symbol does not appear, or disappears brieﬂy, Adaptive Cruise Control will not respond to vehicles you may see ahead.
Page 159 Stationary or Very Slow-Moving Objects CAUTION: Adaptive Cruise Control may not detect and react to stationary or slow-moving vehicles or other objects ahead of you. You could crash into an object ahead of you. Do not use Adaptive Cruise Control when approaching stationary or slow-moving vehicles or other objects.
Page 160 Passing a Vehicle If you need to increase speed to pass a vehicle, use the accelerator pedal. While your foot is on the accelerator pedal, the system will not automatically apply the brakes. Once you pass the vehicle and remove your foot from the accelerator pedal, Adaptive Cruise Control will return to normal operation and be able to apply the brakes, if needed.
Page 161 When following a vehicle and entering a curve, Adaptive Cruise Control could lose track of the vehicle in your lane and accelerate your vehicle. When this happens, the vehicle ahead symbol will not appear on the HUD. Adaptive Cruise Control may detect a vehicle that is not in your lane and apply the brakes.
Page 162 Highway Exit Ramps CAUTION: Adaptive Cruise Control may lose track of the vehicle ahead and accelerate up to your set speed while entering or on highway exit ramps. You could be startled by this acceleration and even lose control of the vehicle. Disengage Adaptive Cruise Control before entering a highway exit ramp.
Page 163 Using Adaptive Cruise Control on Hills How well Adaptive Cruise Control will work on hills depends on your speed, vehicle load, traffic conditions and the steepness of the hills. It may not detect a vehicle in your lane while driving on hills.
Page 164: Exterior Lamps
Cleaning the System The radar can become blocked by snow, ice or dirt. If so, you may need to turn off the engine and clean the lens. The lens is located on the driver’s side of the front fascia. Clean the surface with a 50/50 mixture of isopropyl alcohol and water on a dampened cloth.
Page 165 (Exterior Lamp Control): Turn the band with this symbol on it to operate the exterior lamps. The exterior lamp band has four positions: (Off): Turning the band to this position turns off all lamps. AUTO (Automatic): Turning the band to this position sets the exterior lamps in automatic mode.
Page 166: Wiper Activated Headlamps
Wiper Activated Headlamps This feature activates the headlamps and parking lamps after the windshield wipers have been in use for approximately six seconds and the multifunction lever is in the AUTO position. See Exterior Lamps on page 164. When the exterior lamp control has been turned off or is in the parking lamp position and the wiper control is on delay, low speed or high speed, the HEADLAMPS SUGGESTED message...
Page 167: Adaptive Forward Lighting System
When it is bright enough outside, the regular lamps go off, and the front turn signal lamps take over. If you start your vehicle in a dark garage, the automatic headlamp system comes on immediately. Once you leave the garage, it takes about one minute for the automatic headlamp system to change to DRL if it is light outside.
Page 168: Fog Lamps
Fog Lamps Use fog lamps for better vision in foggy or misty conditions. The fog lamps control is located on the multifunction lever next to the exterior lamp control. (Fog Lamps): Turning the band to this position will turn the fog lamps on. When you turn the fog lamps on, the fog lamp light will appear on the instrument panel cluster to indicate that the fog lamps and the parking...
Page 169: Exterior Lighting Battery Saver
During that delay, your instrument panel cluster may not be as bright as usual. Make sure your instrument panel brightness control is in full bright position. See Instrument Panel Brightness on page 170 for more information. You can idle the vehicle with the lamps off, even when it is dark outside.
Page 170: Instrument Panel Brightness
Instrument Panel Brightness The button for this feature is located on the instrument panel to the left of the steering column. - (Brightness): Press this button to change the brightness of the instrument panel lights. Press the DIMMER button until PANEL DIMMING appears on the Driver Information Center (DIC).
Page 171: Reading Lamps
Reading Lamps Your inside rearview mirror includes two reading lamps. The lamps will go on when a door is opened. When the doors are closed, each lamp can be turned on individually by pressing the button for that lamp. Battery Run-Down Protection Your vehicle has a feature to help prevent the battery from being drained, in case the underhood lamp, vanity mirror lamps, cargo lamps, reading...
Page 172 The HUD consists of the following information: • Speedometer • Turn Signal Indicators • High-Beam Indicator Symbol • Tap-Up/Tap-Down Transmission Feature • Check Gages Icon • Adaptive Cruise Control Features and Indicators • Radio Features Be sure to continue scanning your displays, controls and driving environment just as you would in a vehicle without HUD.
Page 173 The HUD controls are located to the left of the steering wheel. - (Brightness): This button is used to adjust the brightness of the HUD and the instrument panel cluster. DIMMER: This button is used to select the HUD or the instrument panel cluster to adjust the brightness.
Page 174 As light shines out from the HUD, it is possible for light to shine back in. In rare occurrences, when the sun is at a speciﬁc angle and position, the sun’s rays can shine back into the HUD. When this occurs, the display device within the HUD will be temporarily illuminated.
Page 175: Ultrasonic Rear Parking
Ultrasonic Rear Parking Assist (URPA) Ultrasonic Rear Parking Assist can help you to determine how close an object is to your rear bumper within a given area, making parking easier. CAUTION: The Ultrasonic Rear Park Assist (URPA) system does not replace driver vision. URPA does not: •...
Page 176: How The System Works
How the System Works URPA comes on automatically when the shift lever is moved into REVERSE (R) and the vehicle speed is less than 3 mph (5 km/h). When the system comes on, the three lights on the display will illuminate to let you know that the system is working.
Page 177: Accessory Power Outlet(S)
As always, drivers should use care when backing up a vehicle. Always look behind you, being sure to check for other vehicles, obstructions and blind spots. Accessory Power Outlet(s) The accessory power outlet can be used to connect electrical equipment such as a cellular phone or CB radio.
Page 178: Climate Controls
Ashtray(s) and Cigarette Lighter The ashtray and cigarette lighter are located under a lid in the front console to the right of the shift lever. Press the left side of the lid and it will open automatically. Notice: If you put papers, pins, or other ﬂammable items in the ashtray, hot cigarettes or other smoking materials could ignite them and possibly damage your vehicle.
Page 179 Automatic Operation AUTO (Automatic): When this button is pressed and the temperature is set, the system will automatically control the inside temperature, the air delivery mode, the air conditioning compressor and the fan speed. AUTO will appear on the display. 1.
Page 180 Manual Operation (Power/Temperature): Press the PWR button on the left side of the climate control panel to turn the entire climate control system on or off. Press the up or down arrow on the switch to manually increase or decrease the temperature inside the vehicle.
Page 181 A/C OFF (Air Conditioning): Press this button to turn off the air conditioning compressor. Press AUTO to return to automatic operation. The compressor cannot be turned off in either the defrost or ﬂoor/defog mode. (Heated/Cooled Seat): Press this button to turn the feature on.
Page 182: Defogging And Defrosting
There is also a sensor located behind the front bumper. This sensor reads the outside air temperature and helps maintain the temperature inside the vehicle. The outside temperature will be displayed in the navigation system only when the engine is running. Any cover on the front of the vehicle could give a false reading of the temperature.
Page 183: Rear Window Defogger
Rear Window Defogger The rear window defogger uses a warming grid to remove fog or frost from the rear window. The rear window defogger will only work when the engine is running. (Rear Window Defogger): Press this button to turn the rear window defogger on or off. Be sure to clear as much snow from the rear window as possible.
Page 184: Outlet Adjustment
Outlet Adjustment Use the thumbwheel to open or close the outlets. Operation Tips • Clear away any ice, snow or leaves from the air inlets at the base of the windshield that may block the ﬂow of air into your vehicle. •...
Page 185: Warning Lights, Gages, And Indicators
Warning Lights, Gages, and Indicators This part describes the warning lights and gages that may be on your vehicle. The pictures will help you locate them. Warning lights and gages can signal that something is wrong before it becomes serious enough to cause an expensive repair or replacement.
Page 186: Instrument Panel Cluster
Instrument Panel Cluster Your instrument panel cluster and Driver Information Center (DIC) are designed to let you know at a glance how the vehicle is running. You will know how fast you are going, about how much fuel you have left and many other things you will need to know to drive safely and economically.
Page 187: Speedometer And Odometer
Speedometer and Odometer Your speedometer lets you see your speed in either miles per hour (mph) or kilometers per hour (km/h). There is only one scale for mph and km/h. Use the Driver Information Center (DIC) controls to switch between mph and km/h. See DIC Controls and Displays on page 204 for more information.
Page 188: Airbag Readiness Light
Airbag Readiness Light There is an airbag readiness light on the instrument panel cluster, which shows a deployed airbag symbol. The system checks the airbag’s electrical system for malfunctions. The light tells you if there is an electrical problem. The system check includes the airbag modules, the wiring and the diagnostic module.
Page 189: Passenger Airbag Status Indicator
Passenger Airbag Status Indicator Your rearview mirror has a passenger airbag status indicator. United States Canada When the vehicle is started, the passenger airbag status indicator will light ON and OFF, or the symbol for on and off, for several seconds as a system check.
Page 190 Never put a child in a rear-facing child restraint in the passenger’s seat unless the passenger airbag status indicator shows off and the airbags are off. Here is why: CAUTION: Even though the passenger sensing system is designed to turn off the passenger’s frontal airbag and side impact airbag (if equipped) if the system detects a rear-facing child restraint, no...
Page 191: Charging System Light
If the word OFF or the off symbol is lit on the passenger airbag status indicator, it means that the passenger sensing system has turned off the passenger’s airbags. See Passenger Sensing System on page 53 for more on this, including important safety information.
Page 192: Voltmeter Gage
Voltmeter Gage When the vehicle is in accessory mode, the voltmeter shows the voltage output of your battery. When the engine is running, it shows the voltage output of the charging system. The reading will change as the rate of charge changes (with engine speed, for example), but if the voltmeter reads at 9 volts or below, your instrument panel cluster and other systems may...
Page 193: Anti-Lock Brake System Warning Light
If the light comes on while you are driving and you have a LOW BRAKE FLUID message showing on the DIC, pull off the road and stop carefully. You may notice that the pedal is harder to push. Or, the pedal may go closer to the ﬂoor. It may take longer to stop.
Page 194: Traction Control System (Tcs) Warning Light
Traction Control System (TCS) Warning Light This light should come on brieﬂy as you start the engine. If the light does not come on then, have it ﬁxed so it will be ready to warn you if there is a problem. The light will also come on while the StabiliTrak system warms up and the STABILITRAK WARMING message will be displayed in the...
Page 195: Engine Coolant Temperature Gage
® If you turn off the StabiliTrak the front part of the button on the console for ﬁve seconds, the TCS light will come on, a chime will sound and the TRAC/STABILITRAK OFF message will be displayed in the DIC. The TCS will also be turned off.
Page 196: Tire Pressure Light
Tire Pressure Light This light will come on brieﬂy when you turn the ignition on. This light will also come on when one or more of your tires are signiﬁcantly underinﬂated. A LOW TIRE PRESS DIC message will accompany the light, see Other Messages on page 219 for more information.
Page 197 This system is called OBD II (On-Board Diagnostics-Second Generation) and is intended to assure that emissions are at acceptable levels for the life of the vehicle, helping to produce a cleaner environment. The check engine light comes on to indicate that there is a problem and service is required.
Page 198: If The Light Is Flashing
If the Light Is Flashing The following may prevent more serious damage to your vehicle: • Reducing vehicle speed • Avoiding hard accelerations • Avoiding steep uphill grades If the light stops ﬂashing and remains on steady, see “If the Light Is On Steady” following. If the light continues to ﬂash, when it is safe to do so, stop the vehicle.
Page 199: Emissions Inspection And Maintenance Programs
Have you recently changed brands of fuel? If so, be sure to fuel your vehicle with quality fuel. See Gasoline Octane on page 366. Poor fuel quality will cause the engine not to run as efficiently as designed. You may notice this as stalling after start-up, stalling when you put the vehicle into gear, misﬁring, hesitation on acceleration, or stumbling on acceleration.
Page 200: Engine Oil Pressure Gage
Your vehicle will not pass this inspection if the OBD (on-board diagnostic) system determines that critical emission control systems have not been completely diagnosed by the system. The vehicle would be considered not ready for inspection. This can happen if you have recently replaced the battery or if the battery has run down.
Page 201: Security Light
CAUTION: Do not keep driving if the oil pressure is low. If you do, your engine can become so hot that it catches ﬁre. You or others could be burned. Check your oil as soon as possible and have your vehicle serviced.
Page 202: Lights On Reminder
Lights On Reminder This light comes on whenever the headlamps are on. United States Only Highbeam On Light This light comes on when the high-beam headlamps are in use. See Headlamp High/Low-Beam Changer on page 143. Fuel Gage Your fuel gage tells you about how much fuel you have left when the ignition is on.
Page 203: Driver Information Center (Dic)
Here are ﬁve things that some owners ask about. All these things are normal and do not indicate that anything is wrong with the fuel gage. • At the gas station, the gas pump shuts off before the gage reads the full symbol. •...
Page 204: Dic Controls And Displays
DIC Controls and Displays The Driver Information Center (DIC) buttons are located to the right of the steering wheel on the instrument panel, near the air outlets. « 4 ª (Information): Press the top or bottom of this button to scroll through the available features which include the odometer, trip odometers, fuel range, miles per gallon, average speed, timer, tire pressure, and remaining oil life.
Page 205 RANGE xxx MI: This feature shows about how many miles (mi) or kilometers (km) you can drive without reﬁlling your fuel tank. Once the range drops below 40 miles (64 km) remaining, the display will show LOW. If the vehicle has been idling for a long time, the range displayed on the DIC could be abnormally low.
Page 206: Dic Warnings And Messages
FRONT Lxx Rxx PSI: This feature shows the tire pressure for the front left and right tires. REAR Lxx Rxx PSI: This feature shows the tire pressure for the rear left and right tires. OIL LIFE: This feature shows the estimated oil life remaining.
Page 207 BUCKLE PASSENGER This message reminds you to buckle the passenger’s safety belt. This message displays and a chime sounds when the ignition is on, the driver’s safety belt is buckled, the passenger’s safety belt is unbuckled with the passenger airbag enabled, and the vehicle is in motion.
Page 208 CLEAN RADAR CRUISE If your vehicle has this feature, this message displays when the Adaptive Cruise Control (ACC) system is disabled because the radar is blocked and cannot detect vehicles in your path. It may also activate during heavy rain or due to road spray.
Page 209 ENGINE PROTECTION REDUCE ENGINE RPM If this message displays, the control system has determined that continued operation at the existing engine speed may lead to engine overheating. Lower the engine speed by upshifting the transmission or drive at a lower speed. HEADLAMPS SUGGESTED This message displays if it is dark enough outside and the headlamps and Twilight Sentinel...
Page 210 LEFT DOOR AJAR This message displays anytime the engine is running, the transmission is not in PARK (P), and the driver’s door is open or ajar. A chime sounds when the vehicle’s speed is greater than 3 mph (5 km/h). LOW BRAKE FLUID This message displays if the engine is running to inform the driver that the brake ﬂuid level is...
Page 211 LOW VOLTAGE This message displays when the electrical system is charging less than 10 volts or if the battery has been drained. If this message displays immediately after starting, it is possible that the generator can still recharge the battery. The battery should recharge while driving, but may take a few hours to do so.
Page 212 NO FOB DETECTED This message displays if the vehicle does not detect the presence of a keyless access transmitter when you have attempted to start the vehicle or a vehicle door has just closed. The following conditions may cause this message to appear: •...
Page 213 NO FOB, OFF OR RUN? This message displays when a keyless access transmitter is not detected inside the vehicle while you are trying to turn the ignition off. Your vehicle may be near a strong radio antenna signal causing the keyless access system to be jammed.
Page 214 SERVICE A/C This message displays when the electronic sensors that control the air conditioning and heating systems are no longer working. Have the climate control system serviced by your dealer if you notice a drop in heating and air conditioning efficiency.
Page 215 SERVICE FUEL SYSTEM This message displays when the Powertrain Control Module (PCM) has detected a problem within the fuel system. Have your vehicle serviced by your dealer. This message will also be displayed when the cluster is not getting fuel information from the PCM.
Page 216 SHIFT TO PARK This message displays if the vehicle is not in PARK (P) when the engine is being turned off. The vehicle will be in accessory mode. Once the shift lever is moved to PARK (P), the vehicle will turn off.
Page 217 SVC (Service) TIRE MONITOR This message displays if a part on the Tire Pressure Monitor (TPM) is not working properly. If you drive your vehicle while any of the four sensors are missing or inoperable, the warning comes on in about 30 minutes. A sensor would be missing, for example, if you put different wheels on your vehicle without transferring the sensors.
Page 218 TRAC (Traction) SYSTEM ACTIVE This message displays when the Traction Control System (TCS) is limiting wheel spin. Slippery road conditions may exist if this message is displayed, so adjust your driving accordingly. This message stays on for a few seconds after the TCS stops limited wheel spin.
Page 219: Other Messages
Other Messages Here are more messages that you can receive on your Driver Information Center (DIC). To acknowledge a message and read another message that may have come on at the same time, press the RESET button. • ACCESSORY MODE ON •...
Page 220: Dic Vehicle Personalization
DIC Vehicle Personalization Your vehicle has personalization capabilities that allow you to program certain features to a preferred setting for up to two drivers. The back of the keyless access transmitters are labelled 1 or 2. The current driver’s preferences are recalled when one of the following occurs: •...
Page 221: Auto Recall
Auto Recall This feature allows the steering column, outside mirrors and the driver’s seat to automatically move to the current driver’s set position when the engine starts. The DIC will display AUTO RECALL OFF or AUTO RECALL ON. Press the OPTIONS button to change the setting.
Page 222 Flash at Unlock This feature activates the front and rear turn signals for two short ﬂashes when the unlock or trunk button on the keyless access transmitter is pressed. This will only occur when the vehicle is off. The DIC will display NO FLASH AT UNLOCK or FLASH AT UNLOCK.
Page 223 A person approaching the outside of the locked vehicle without an authorized keyless access transmitter, however, will not be able to open the door, even with a transmitter in the vehicle. You may temporarily disable the passive door locking feature by pressing the door unlock switch for three seconds on an open door.
Page 224: Trip Computer
Auto Unlock This feature automatically unlocks either the driver’s door or both doors, depending on the setting, when the shift lever is moved to PARK (P). The DIC will display AUTO UNLOCK OFF, AUTO UNLOCK DRIVER, or AUTO UNLOCK BOTH. Press the OPTIONS button to change the setting.
Page 225: Audio System(S)
The DIC may display a CHANGE OIL NOW message. If you see CHANGE OIL NOW, it means the oil life is gone. For more information, see Scheduled Maintenance on page 465 and Engine Oil on page 377. When the oil is changed, you will need to reset the system.
Page 226: Theft-Deterrent Feature
Here are some ways in which you can help avoid distraction while driving. While your vehicle is parked: • Familiarize yourself with all of its controls. • Familiarize yourself with its operation. • Set up your audio system by presetting your favorite radio stations, setting the tone, and adjusting the speakers.
Page 227: Audio Steering Wheel Controls
Audio Steering Wheel Controls Left Side Controls For Left Side Controls For Some audio controls can be adjusted at the steering wheel. They include the following: Right Side Controls For Both XLR and XLR-V (Voice Recognition): Your vehicle has the Navigation System.
Page 228: Radio Reception
(Volume): Press this button to increase or to decrease the volume. + 1-6 (Preset Stations): Press this button to play stations that are programmed on the radio preset pushbuttons. The radio will only seek preset stations with a strong signal that are in the selected band.
Page 229: Xm™ Satellite Radio Service
XM™ Satellite Radio Service XM™ Satellite Radio Service gives digital radio reception from coast-to-coast in the 48 contiguous United States, and in Canada. Just as with FM, tall buildings or hills can interfere with satellite radio signals, causing the sound to fade in and out. In addition, traveling or standing under heavy foliage, bridges, garages, or tunnels may cause loss of XM signal for a period of time.
Page 230: Care Of The Cd Player
Care of the CD Player Do not use CD lens cleaners for CD players because the lens of the CD optics can become contaminated by lubricants. Diversity Antenna System The AM-FM antennas are located under the decklid surface in the trunk compartment. The antennas are hidden from view and are not accessible.
Page 231: Navigation System
Section 4 Overview ... 232 Navigation System Overview ... 232 Getting Started ... 234 Features and Controls ... 240 Using the Navigation System ... 240 Setup Menu ... 243 Plan Route ... 249 Edit Memory Point ... 250 Edit Waypoint ... 254 Edit Avoid Point/Area ...
Page 232: Overview
Overview Navigation System Overview...
Page 233 A. BAND Key. See “Finding a Station” under Navigation Audio System on page 285. B. CD Key. See Navigation Audio System on page 285 or CD/DVD Player on page 305. C. DVD Key. See “Playing a DVD” under CD/DVD Player on page 305. D.
Page 234: Getting Started
Getting Started Before you begin to operate the navigation system, read this manual thoroughly to become familiar with it and to understand how the system works. Keeping your mind on the drive is important for safe driving. See Defensive Driving on page 322 for more information.
Page 235 CAUTION: Looking at the moving map on the navigation screen frequently or for too long while driving can cause a crash and you or others can be injured or killed. Keep your eyes and mind on the road and avoid looking too long or too often at the moving map on the navigation screen.
Page 236: Setting Radio Station Presets
Setting Radio Station Presets To set preset radio stations, do the following: 1. Press the PWR/VOL knob to turn the system on. 2. Press the audio source screen button (AM, FM1, FM2, etc.) and select the desired band (AM, FM1, FM2, XM1, or XM2 (if equipped), or WX (weather) (if equipped)).
Page 237 Setting the Search Area, Entering an Address and Point of Interest, Storing a Home Destination, and Using Your Home or Previous Destinations Before entering an Address, Point of Interest, Home, or Preset Destination, select the appropriate region that contains the ﬁnal destination.
Page 238 6. Press the Street screen button, then enter the street name using the alpha keypad on the screen. Do not enter directional information or street type, and use the space screen button between street or city names. For example, the street name N.
Page 239 Storing a Home Destination 1. Press the power/volume knob to turn the system on. 2. Insert the DVD map disc. See “Regional Maps” under Maps on page 271 for more information. 3. A notice may appear. Touch the I AGREE screen button to proceed.
Page 240: Guidance Volume
Canceling Your Current Route Guidance will be canceled once you arrive at your ﬁnal destination. To cancel the current route prior to arrival at the ﬁnal destination, do the following: 1. Press the ROUTE hard key. 2. Press the Route Preference screen button. 3.
Page 241 DVD: Press the DVD key to play a DVD. The DVD screen will be displayed. See CD/DVD Player on page 305. TUNE/SEEK : Press the TUNE/SEEK up or down arrows to go to the next or previous radio station and stay there. See “Finding a Station” under Navigation Audio System on page 285.
Page 242: Alphanumeric Keypad
Alpha-Numeric Keypad Letters of the alphabet, symbols, punctuation, and numbers, when available to you, will be displayed on the navigation screen as an alpha or numeric keypad. The alpha keypad will be displayed when the system needs you to input a city or street name.
Page 243: Setup Menu
Setup Menu MENU: Press the MENU key located to the right of the navigation screen to access the SETUP MENU. The SETUP MENU allows you to adjust such things as map appearance, navigation settings, and voice guidance volume. Navigation Settings This menu allows you to change the following options for the navigation system.
Page 244 System Conﬁguration This feature allows you to reconﬁgure the navigation system. If you begin to drive your vehicle during this procedure, the system will not be able to adjust the position or direction of your vehicle. Touch the System Conﬁguration screen button to view the following choices: Adjust Vehicle Position: To correct the position of your vehicle on the map or to change vehicle...
Page 245 Quick POI (Point of Interest) Selection This menu allows you to choose a point of interest (POI), such as gas stations, restaurants, hotels, etc. to be displayed on the map screen. You can also set a destination to a speciﬁc POI. Setting the Quick POI Menu To set the Quick POI list displayed on the map screen, do the following:...
Page 246 Removing Quick POI Icons To remove POI icons from the map screen, do the following: 1. Touch the map screen once. 2. Touch the POI OFF screen button. The current POI icons will be removed from the map screen. Setting a Destination Using Quick POI This feature will allow you to choose a POI as your destination.
Page 247 Guidance Appearance This menu allows you to set the guidance appearance screen options. This screen is displayed on the map while on a planned route. The current settings will appear as light blue. Split Map: Select this feature to display the guidance screen on the map at all times.
Page 248: Map Appearance
Map Appearance This menu allows you to set the map appearance screen options. The current setting will appear as light blue. 2D: Select this feature to display the map as a two-dimensional view. 3D: Select this feature to display the map as a three-dimensional view.
Page 249: Plan Route
Voice Guidance Volume Settings This feature allows you to set the voice prompt volume level or to turn voice prompts on or off. Set the voice prompt volume level by touching the numbered buttons to increase or decrease the volume level. You may also choose to turn the voice prompts off.
Page 250: Edit Memory Point
Edit Memory Point This feature allows you to store, delete, and edit memory points. Touch the Edit Memory Point screen button from the PLAN ROUTE menu to access the EDIT MEMORY POINT screen. You can store memory points in four different categories, personal, business, entertainment, and marked point.
Page 251: Editing Memory Points
Editing Memory Points This feature allows you to edit the contents stored in memory. The following options are available: Icon Editing of a Memory Point Each memory point is displayed with a default icon. To edit an icon, do the following: 1.
Page 252 Adjusting a Memory Point To relocate a memory point’s location, do the following: 1. Select the category of the memory point. 2. Select the memory point you want to edit. 3. Touch POSITION. A map screen with the position of this memory point will appear. 4.
Page 253: Deleting All Memory Points
Deleting All Memory Points To delete all of the memory points in a category, do the following: 1. Press the ROUTE key. 2. Touch EDIT MEMORY POINT. 3. Select the desired category. 4. Touch the DELETE ALL screen button. A conﬁrmation window will appear.
Page 254: Edit Waypoint
Previous Destination Memory Each time you select Start from the map screen, that destination will be stored as a memory point under PREVIOUS DESTINATION. This category will store up to 10 destinations. When the Previous Destination category contains more than 10 destinations, the system will remove the oldest destination stored and add the most recent one selected to the list.
Page 255: Adding A Waypoint
Adding a Waypoint To add a waypoint to your route, do the following: 1. Touch Add Waypoint. 2. Enter a destination. See Enter Destination on page 259. A map will appear showing the location of the waypoint. 3. Touch Enter to add your waypoint. 4.
Page 256: Editing A Waypoint
Delete All: Touch Delete All to delete all of the waypoints and the ﬁnal destination. A conﬁrmation window will appear. Touch YES to delete all waypoints or NO to return to the previous screen. Change: Touch Change to change the ﬁnal destination.
Page 257: Edit Avoid Point/Area
Edit Avoid Point/Area From this menu you can register, edit, and delete an area to be avoided while planning a route. These areas can also be saved so the system can automatically avoid them when planning a route. To access the AVOID POINT/AREA menu, do the following: 1.
Page 258 Editing an Avoid Point/Area To edit an avoid point/area, do the following: 1. Touch Edit Avoid Point/Area. A list of avoided points will appear. 2. Select the avoided point/area you want to change. A map of the avoided area will appear.
Page 259: Enter Destination
Enter Destination The DESTINATION menu will give you several ways to plan a route. Touch the Enter Destination screen button from the PLAN ROUTE menu to display the DESTINATION menu. For destination entry methods listed on the second page of the DESTINATION menu, touch the Next Page arrow.
Page 260 Easy Planning Route With this destination entry method, you can select a destination using the scroll symbol on the map screen. See Maps on page 271. To use this destination entry method, do the following: 1. Press the MAP key. 2.
Page 261 Address This destination entry method allows you to input an address by providing the system with a house number, street name, and city. Select Street to begin entering the desired address. To use this destination entry method, do the following: 1.
Page 262 All Points of Interest This destination entry method allows you to choose a destination from the point of interest (POI) list. Selecting All Points Of Interest from the DESTINATION menu will bring up the alpha keypad. While inputting a POI or city name, the List option will become available.
Page 263: Memory Points
The system will list all POIs available. You can sort by name using NAME SORT or touch DIST SORT to list POIs by distance from your current location. Select a location from the list. The system will show the selected POI on the map. If available, a pop-up window will be displayed.
Page 264: Previous Destination
To select a destination using this entry method, do the following: 1. Touch the Memory Points symbol. 2. Select a category. 3. Select a destination. Use the arrows to scroll through the memory points. They can be sorted by date, name, distance, and icon. 4.
Page 265 Previous Starting Point This destination entry method allows you to select the last start point as your destination. To select the previous start point as your destination, do the following: 1. Touch Previous Destination. 2. Touch the Previous starting point screen button.
Page 266: Freeway Entrance/Exit
Set by Map This destination entry method allows you to select a destination by using the scroll symbol. To use this feature, do the following: 1. Touch the Set By Map symbol. Current vehicle position will be shown on the map screen.
Page 267 To enter a freeway name, do the following: 1. Touch the Freeway Entrance/Exit symbol. 2. Enter the freeway name using the alpha key pad. Freeways sometimes have a name and a number associated with them which you may need to refer to when entering freeway information.
Page 268 Intersection This destination entry method allows you to select a destination by inputting the intersecting roads you wish to travel to. To enter an intersection, do the following: 1. Touch the Intersection symbol. 2. Using the alpha keypad, enter the name of the ﬁrst street in the intersection.
Page 269: Route Preference
Route Preference To change your planning options, use the following instructions. 1. Press the ROUTE key. 2. Touch Route Preference. The following options will be available from the ROUTE PREFERENCE menu: Detour This feature allows you to choose a distance in miles/kilometers to detour.
Page 270: Route Setting
Route Setting This feature allows you to display and change the planning methods used each time you plan a route. With planning method options, you are able to select the fastest route based on time or distance, using only major roads, toll roads, and using ferries based on the navigation system’s information and information contained on the map DVD.
Page 271: Maps
Display Whole Route This feature allows you to display your entire planned route. Total mileage and time to destination for the planned route will be displayed on the map screen. Touch Return to go back to the previous menu. Calculate Route This feature allows you to begin route calculation for the selected destination.
Page 272: Ejecting The Dvd Map Disc
4. Load the map DVD into the slot by inserting it partway. The system will pull it in. 5. Press and release the TILT key to close the faceplate. Notice: Shifting out of PARK (P) with the system’s faceplate open will cause the faceplate to close automatically.
Page 273 Setting the Search Area To determine or change the system’s search area, do the following: 1. Press the ROUTE key. 2. Touch the Enter Destination screen button. 3. Touch Change under the Search Area heading. The system will display a map with each region represented.
Page 274: Map Adjustments
Map Adjustments The system allows you to adjust the scale of view on the map. The map will scroll automatically based on the direction you are traveling. Map Scales To view a larger or smaller scale of the map, touch the map scale arrows.
Page 275: Symbols
Symbols The following symbols are the most common that appear on a map screen. Your vehicle is shown as this symbol. It indicates the current position and heading direction of your vehicle on the map. This symbol will appear on the map to show your destination after a route has been planned.
Page 276 This symbol indicates the distance and estimated travel time to your ﬁnal destination. The Estimated Travel Time feature must be on for estimated travel time to be displayed. This symbol indicates the distance to your ﬁnal destination in a straight line. This symbol will appear before route guidance begins or if you are on a road where route guidance is not available.
Page 277 This symbol will appear when the navigation system is unable to receive the GPS signal. See Global Positioning System (GPS) on page 281 for more information. When a point of interest (POI) or street address name is too long to be displayed, an arrow will appear.
Page 278 With these options, you can do the following: Dest (Destination) Map: This option allows you to view the ﬁnal destination location. The destination’s name or address will be displayed on the map screen. Touch Return when ﬁnished. Whole: This option allows you to view the entire planned route.
Page 279: Auto Reroute
Turn List: This option allows you to view a step-by-step listing of upcoming street names, the distance that you will travel on the road, and turns you will need to make during your planned route. After touching Turn List, the system may take some time to create the list.
Page 280: Keyless Access System
Traveling Across Regions If you plan to drive across several states, you may have to change the selected region to represent the area you are traveling to. There are two ways you can plan a destination when traveling across regions. The following method is suggested and provides the most route guidance and map display functions:...
Page 281: Onstar System
® OnStar System ® When using the OnStar system, the audio system will be muted and the navigation voice prompts will be disabled during the call. The ® volume of the OnStar call can be adjusted by using the steering wheel volume controls. ®...
Page 282: Vehicle Positioning
Vehicle Positioning At times, the position of the vehicle on the map may be inaccurate due to one or more of the following reasons: • The road system has changed. • The vehicle is driving on slippery road surfaces such as in sand, gravel, and/or snow. •...
Page 283: Problems With Route Guidance
Problems with Route Guidance Inappropriate route guidance may occur under one or more of the following conditions: • You have not turned onto the road indicated. • Route guidance may not be available when using automatic rerouting for the next right or left turn.
Page 284: Ordering Map Dvds
Ordering Map DVDs You will receive two free DVD map disc updates with the purchase of your new vehicle. Updates are necessary to make sure that your vehicle’s navigation system has the most accurate information available about streets/roads, points of interest, and business locations.
Page 285: Navigation Audio System
Navigation Audio System Notice: Before adding any sound equipment to your vehicle, such as an audio system, CD player, CB radio, mobile telephone, or two-way radio, make sure that it can be added by checking with your dealer. Also, check federal rules covering mobile radio and telephone units.
Page 286 Preset Selection: Here you can program the audio system’s presets to recall your home settings by touching HOME. You can also recall the presets you use when traveling to another area by touching AWAY. See “Preset Station Menu” later in this section for more information on how to store preset stations.
Page 287 This feature is most effective at lower volume settings where background noise can affect how well you hear the music being played through your vehicle’s audio system. At higher volume settings, where the music is much louder than the background noise, there may be little or no ®...
Page 288 GPS TIME: The current GPS time will be displayed to the right of this screen button. Touch GPS TIME to set the navigation system time to match current GPS time. If the seconds for the present minute are greater than thirty when GPS TIME is selected, the clock will round up to the next minute.
Page 289: Playing The Radio
AUTO: This setting automatically adjusts the contrast and brightness of the screen depending on exterior lighting conditions. DAY: This setting leaves the screen in day mode. Day mode is best suited for daylight conditions. NIGHT: This setting leaves the screen in night mode.
Page 290: Finding A Station
Finding a Station FM1 audio source shown, other sources similar Press the BAND key to switch between AM, FM1, FM2, XM1, XM2, or WX, if equipped. Touch the desired audio source to select it. Preset Station Menu Up to 36 stations, 6 AM, 6 FM 1, 6 FM 2, 6 XM 1, 6 XM 2, and 6 WX, if equipped, can be programmed for home and for away.
Page 291: Sound Menu
SCAN: To scan stations, touch SCAN. The radio will go to a station, play for a few seconds, then go on to the next station. Touch SCAN again to stop scanning. To scan preset stations, touch and hold SCAN for two seconds.
Page 292 To adjust sound settings, do the following: 1. Touch the plus (+) or minus ( ) signs to adjust treble, mid-range, and bass. 2. Touch the L for left or R for right to adjust the balance of the speakers. 3.
Page 293 Adjusting the Speakers DSP (Digital Signal Processing): The DSP feature is used to provide a choice of four different listening experiences. DSP can be used while listening to the audio system or the CD player. The audio system can store separate DSP settings for each source and preset station, except WX, which is always set to TALK.
Page 294: Radio Data Systems (Rds)
Radio Data Systems (RDS) The audio system has a Radio Data System (RDS). RDS features are available for use only on FM stations that broadcast RDS information. With RDS, the radio can do the following: • Seek to stations broadcasting the selected type of programming •...
Page 295 If you are tuned to a station broadcasting RDS information, the station’s Program Service (PS) and Program Type (PTY) will replace the station’s frequency on the status line at the top of the display. After about ﬁve seconds, if available, the PTY will be replaced on the display by the station’s PTY name.
Page 296 When a traffic announcement comes on the current radio station or a related network station, you will hear it even if the volume is muted or a CD is playing. If the audio system tunes to a related network station for a traffic announcement, it will return to the original station when the announcement is ﬁnished.
Page 297 PTY (Program Type) Presets: The six presets let you return to your favorite PTYs. These presets have factory PTY preset stations. See “RDS Program Type (PTY) Selections” later in this section. You can set up to 12 PTYs, 6 FM 1 and 6 FM2.
Page 298 XM™ Satellite Radio Service XM™ is a satellite radio service that is based in the 48 contiguous United States and in Canada. XM™ offers a large variety of coast-to-coast channels including music, news, sports, talk/weather (U.S. subscribers), and children’s programming. XM™ provides digital quality audio and text information that includes the channel name and number, song title, and artist name.
Page 299 XL (Explicit Language Channels): XL on the radio display, after the channel name, indicates content with explicit language. These channels, or any others, can be blocked at a customer’s request, by calling; in the U.S. 1-800-852-XMXM (9696) or in Canada 1-877-GET-XMSR (438-9677). Setting Program Type (PTY) Preset Stations (Category): Press the arrows to select...
Page 300: Xm Radio Messages
XM Radio Messages Radio Display Message XM Updating Updating encryption code The encryption code in your receiver is being updated, and No XM Signal Loss of signal Loading XM Acquiring channel audio (after 4 second delay) Channel Off Air Channel not in service Channel Unavail Channel no longer available...
Page 301 Radio Display Message Not Found No channel available for the chosen category No Information No Text/Informational message available XM Theftlocked Theft lock active XM Radio ID Radio ID label (channel 0) If you tune to channel 0, you will see this message Unknown Radio ID not known (should only be if...
Page 302: Six-Disc Cd Changer
Six-Disc CD Changer With the compact disc changer, you can play up to six normal size discs continuously. When the radio is turned on, the changer will begin checking for discs. This will continue for up to one and a half minutes, depending on the number of discs loaded.
Page 303 The following features are also available from this screen: • LOAD • EJECT • SCAN THE DISCS or SCAN THE TRACKS • and RANDOM ALL or RANDOM DISC. The numbered buttons (1 through 6) represent the order of the discs loaded in the changer. If there are only two CDs loaded, buttons 1 and 2 will only be available to choose from.
Page 304 (Pause): Touch this button to pause CD play. Touch it again to resume play or touch the play button. RANDOM ALL: Touch this button to hear the tracks on all of the discs in the CD changer in random, rather than sequential, order. Press the TUNE/SEEK hard key while RANDOM ALL is on to randomly seek within that disc.
Page 305: Cd Changer Errors
CD Changer Errors CDX ERROR could be displayed for the following: • The road is too rough. The disc should play when the road is smoother. • The disc is dirty, scratched, wet or not loaded label side up. • The air is very humid.
Page 306 5. Insert the music CD into the slot. The system will pull the CD into the player. 6. Press and release the TILT hard key to close the faceplate. Notice: Shifting out of PARK (P) with the system’s faceplate open will cause the faceplate to close automatically.
Page 307: Dvd Player
(Play): Touch this button to begin playing a CD. RANDOM: Touch this button to hear the tracks in random, rather than sequential, order on the disc. Touch RANDOM again to turn off random mode. SCAN TRACKS: Touch this button to hear the ﬁrst 10 seconds of each track on the disc.
Page 308: Playing A Dvd
To remove the navigation map DVD and load a video DVD, use the following steps: 1. With the vehicle in PARK (P) and the vehicle running, press the TILT hard key until a beep is heard. The faceplate of the system will open. 2.
Page 309: Dvd Menu Options
DVD Menu Options To display the menu choices while a DVD is playing, touch anywhere on the screen and the menu will appear. IMAGE: Touch this button to either start playing a DVD or to remove the DVD menu screen. AUDIO PROGRAM: Touch this button to change the audio language heard.
Page 310 TITLE: Touch this button to display the title of the DVD. Depending on the type of DVD you are using, this button may or may not be available. If TITLE is available, this button will allow you to navigate through chapters or the DVD features. Once the appropriate title or track has been selected, press the Return button then the IMAGE button on the DVD menu to view the movie in...
Page 311: Radio Personalization With Home And Away Feature
SEARCH: Touch this button to search to a certain scene on the DVD. Depending on the type of DVD you are using, this button may or may not be available. (Rewind): Touch this button to rewind through a scene during playback. (Resume): Touch this button to resume playing a DVD.
Page 312: Voice Recognition
To select HOME and AWAY preset stations, do the following: 1. With the audio system on, touch the Audio hard key and turn the audio system off. 2. Touch the HOME or AWAY button from the main audio screen. The next time the audio system is turned on, the system will recall the last active preset selection.
Page 313: Voice Recognition Commands
You can end voice recognition by not speaking any commands. After about ﬁve seconds of silence, the system will automatically cancel voice recognition. At times, the system may not understand a spoken command. If this happens, try saying the command again. If a spoken command is not available, the system will provide feedback based on availability.
Page 314 Radio Commands Radio: This command will change the audio system to the next radio audio source. AM: This command will change the audio system to the AM audio source. FM1: This command will change the audio system to the FM1 audio source. FM2: This command will change the audio system to the FM2 audio source.
Page 315 Screen Commands Screen Day Mode, Day Mode On: These commands will adjust the system’s screen setting to the day mode. Screen Night Mode, Night Mode On: These commands will adjust the system’s screen setting to the night mode. Screen Auto Mode, Auto Mode On: These commands will adjust the system’s screen setting to auto mode.
Page 316 Map Direction, Change Map Direction: These commands will cause the system to change the vehicle’s direction from North Up to Heading Up or Heading Up to North Up on the map screen if the map scale is set to 2 miles (4 km) or less. Mark, Mark This Point: These commands will cause the system to mark the location as a memory point while on the map screen.
Page 317 Arrow Guidance, Arrow Guide, Change To Arrow Guidance, Change To Arrow Guide: These commands will cause the system to change to Arrow Guidance screen view in the Guidance Menu if a destination has been set. Turn List Guidance, Turn List Guide, Change to Turn List Guidance, Change to Turn List Guide: These commands will cause the system to change to Turn List Guidance screen...
Page 318 Point of Interest (POI) Commands The following commands will cause the system to display icons if they are available on the map screen when the map scale is set to a half mile (eight-tenths km) or less. Restaurant, I’m Hungry: These commands will cause the system to display restaurant POI icons.
Page 319 Rental Car Agency: This command will cause the system to display rental car POI icons. Automobile Club, Triple A: These commands will cause the system to display auto club POI icons. Auto Service And Maintenance, Auto Service, Maintenance: These commands will cause the system to display auto service POI icons.
Page 320 Court House: This command will cause the system to display court house POI icons. Train Station: This command will cause the system to display train station POI icons. Airport: This command will cause the system to display airport POI icons. Bus Station: This command will cause the system to display bus station POI icons.
Page 321: Driving Your Vehicle
Section 5 Your Driving, the Road, and Your Vehicle ... 322 Defensive Driving ... 322 Drunken Driving ... 323 Control of a Vehicle ... 326 Braking ... 326 Anti-Lock Brake System (ABS) ... 327 Braking in Emergencies ... 329 Traction Control System (TCS) ... 329 Magnetic Ride Control ...
Page 322: Your Driving, The Road, And Your Vehicle
Your Driving, the Road, and Your Vehicle Defensive Driving The best advice anyone can give about driving is: Drive defensively. Please start with a very important safety device in your vehicle: Buckle up. See Safety Belts: They Are for Everyone on page 13. CAUTION: Defensive driving really means “Be ready for anything.”...
Page 323: Drunken Driving
Drunken Driving Death and injury associated with drinking and driving is a national tragedy. It is the number one contributor to the highway death toll, claiming thousands of victims every year. Alcohol affects four things that anyone needs to drive a vehicle: •...
Page 324 According to the American Medical Association, a 180 lb (82 kg) person who drinks three 12 ounce (355 ml) bottles of beer in an hour will end up with a BAC of about 0.06 percent. The person would reach the same BAC by drinking three 4 ounce (120 ml) glasses of wine or three mixed drinks if each had 1-1/2 ounces (45 ml) of liquors like whiskey, gin, or vodka.
Page 325 But the ability to drive is affected well below a BAC of 0.10 percent. Research shows that the driving skills of many people are impaired at a BAC approaching 0.05 percent, and that the effects are worse at night. All drivers are impaired at BAC levels above 0.05 percent.
Page 326: Control Of A Vehicle
Control of a Vehicle You have three systems that make your vehicle go where you want it to go. They are the brakes, the steering, and the accelerator. All three systems have to do their work at the places where the tires meet the road.
Page 327: Anti-Lock Brake System (Abs)
Avoid needless heavy braking. Some people drive in spurts — heavy acceleration followed by heavy braking — rather than keeping pace with traffic. This is a mistake. The brakes may not have time to cool between hard stops. The brakes will wear out much faster if you do a lot of heavy braking.
Page 328 Let us say the road is wet and you are driving safely. Suddenly, an animal jumps out in front of you. You slam on the brakes and continue braking. Here is what happens with ABS: A computer senses that wheels are slowing down. If one of the wheels is about to stop rolling, the computer will separately work the brakes at each wheel.
Page 329: Braking In Emergencies
Remember: ABS does not change the time you need to get your foot up to the brake pedal or always decrease stopping distance. If you get too close to the vehicle in front of you, you will not have time to apply your brakes if that vehicle suddenly slows or stops.
Page 330 This warning light will come on to let you know if there is a problem with your traction control system. See Traction Control System (TCS) Warning Light on page 194. When this warning light is on, the system will not limit wheel spin. Adjust your driving accordingly.
Page 331: Magnetic Ride Control
Magnetic Ride Control Magnetic Ride Control automatically adjusts the ride of your vehicle. Automatic ride control is achieved through a computer used to control and monitor the suspension system. The controller receives input from various sensors to determine the proper system response. If the controller detects a problem within the system, the DIC will display a SERVICE RIDE CONTROL message.
Page 332 The STABILITRAK ACTIVE message will come on when the system is operating. See DIC Warnings and Messages on page 206 for more information. You may also feel or hear the system working. This is normal. The instrument panel cluster light will come on and a chime will sound to let you know if there is a problem...
Page 333: Power Steering
Steering Power Steering If you lose power steering assist because the engine stops or the system is not functioning, you can steer but it will take much more effort. Magnetic Speed Variable Assist Steering Your vehicle has a steering system that continuously adjusts the effort you feel when steering at all vehicle speeds.
Page 334: Steering In Emergencies
If you need to reduce your speed as you approach a curve, do it before you enter the curve, while the front wheels are straight ahead. Try to adjust your speed so you can “drive” through the curve. Maintain a reasonable, steady speed.
Page 335: Off-Road Recovery
The fact that such emergency situations are always possible is a good reason to practice defensive driving at all times and wear safety belts properly. Off-Road Recovery You may ﬁnd that your right wheels have dropped off the edge of a road onto the shoulder while you are driving.
Page 336 So here are some tips for passing: • Drive ahead. Look down the road, to the sides, and to crossroads for situations that might affect your passing patterns. If you have any doubt whatsoever about making a successful pass, wait for a better time. •...
Page 337: Loss Of Control
• Try not to pass more than one vehicle at a time on two-lane roads. Reconsider before passing the next vehicle. • Do not overtake a slowly moving vehicle too rapidly. Even though the brake lamps are not ﬂashing, it may be slowing down or starting to turn.
Page 338: Racing Or Other Competitive Driving (Xlr-V)
If your vehicle starts to slide, ease your foot off the accelerator pedal and quickly steer the way you want the vehicle to go. If you start steering quickly enough, your vehicle may straighten out. Always be ready for a second skid if it occurs.
Page 339: Driving At Night
Driving at Night Night driving is more dangerous than day driving. One reason is that some drivers are likely to be impaired — by alcohol or drugs, with night vision problems, or by fatigue. Here are some tips on night driving. •...
Page 340: Driving In Rain And On Wet Roads
Keep the windshield and all the glass on your vehicle clean — inside and out. Glare at night is made much worse by dirt on the glass. Even the inside of the glass can build up a ﬁlm caused by dust. Dirty glass makes lights dazzle and ﬂash more than clean glass would, making the pupils of your eyes contract repeatedly.
Page 341 The heavier the rain, the harder it is to see. Even if your windshield wiper blades are in good shape, a heavy rain can make it harder to see road signs and traffic signals, pavement markings, the edge of the road, and even people walking. It is wise to keep your windshield wiping equipment in good shape and keep your windshield washer ﬂuid reservoir ﬁlled with washer ﬂuid.
Page 342: Driving Through Deep Standing Water
Driving Through Deep Standing Water Notice: If you drive too quickly through deep puddles or standing water, water can come in through your engine’s air intake and badly damage your engine. Never drive through water that is slightly lower than the underbody of your vehicle.
Page 343: City Driving
City Driving One of the biggest problems with city streets is the amount of traffic on them. You will want to watch out for what the other drivers are doing and pay attention to traffic signals. Here are ways to increase your safety in city driving: •...
Page 344: Freeway Driving
Freeway Driving Mile for mile, freeways — also called thruways, parkways, expressways, turnpikes, or superhighways — are the safest of all roads. But they have their own special rules. The most important advice on freeway driving is: Keep up with traffic and keep to the right. Drive at the same speed most of the other drivers are driving.
Page 345: Before Leaving On A Long Trip
Once you are moving on the freeway, make certain you allow a reasonable following distance. Expect to move slightly slower at night. When you want to leave the freeway, move to the proper lane well in advance. If you miss your exit, do not, under any circumstances, stop and back up.
Page 346: Highway Hypnosis
• Tires: They are vitally important to a safe, trouble-free trip. Is the tread good enough for long-distance driving? Are the tires all inﬂated to the recommended pressure? • Weather Forecasts: What is the weather outlook along your route? Should you delay your trip a short time to avoid a major storm system? •...
Page 347: Hill And Mountain Roads
Hill and Mountain Roads Driving on steep hills or mountains is different from driving in ﬂat or rolling terrain. If you drive regularly in steep country, or if you are planning to visit there, here are some tips that can make your trips safer and more enjoyable. •...
Page 348 CAUTION: Coasting downhill in NEUTRAL (N) or with the ignition off is dangerous. Your brakes will have to do all the work of slowing down. They could get so hot that they would not work well. You would then have poor braking or even none going down a hill.
Page 349: Winter Driving
Winter Driving Here are some tips for winter driving: • Have your vehicle in good shape for winter. • You may want to put winter emergency supplies in your vehicle. Also see Tires on page 413. Include an ice scraper, a small brush or broom, a supply of windshield washer ﬂuid, a rag, some winter outer clothing, a small shovel, a ﬂashlight, a red cloth, and a couple of reﬂective warning...
Page 350: Driving On Snow Or Ice
Driving On Snow or Ice Most of the time, those places where the tires meet the road probably have good traction. However, if there is snow or ice between the tires and the road, you can have a very slippery situation.
Page 351: If You Are Caught In A Blizzard
The Anti-Lock Brake System (ABS) improves your vehicle’s stability when you make a hard stop on a slippery road. Even though you have ABS, you will want to begin stopping sooner than you would on dry pavement. See Anti-Lock Brake System (ABS) on page 327.
Page 352 You can run the engine to keep warm, but be careful. CAUTION: Snow can trap exhaust gases under your vehicle. This can cause deadly CO (carbon monoxide) gas to get inside. CO could overcome you and kill you. You cannot see it or smell it, so you might not know it is in your vehicle.
Page 353: If Your Vehicle Is Stuck In Sand, Mud, Ice, Or Snow
You will need a well-charged battery to restart the vehicle, and possibly for signaling later on with your headlamps. Let the heater run for a while. Then, shut the engine off and close the window almost all the way to preserve the heat. Start the engine again and repeat this only when you feel really uncomfortable from the cold.
Page 354: Rocking Your Vehicle To Get It Out
Rocking Your Vehicle to Get It Out First, turn the steering wheel left and right. That will clear the area around the front wheels. You should turn the traction control system off. See Traction Control System (TCS) on page 329. Then shift back and forth between REVERSE (R) and a forward gear, spinning the wheels as little as possible.
Page 355 Tire and Loading Information Label Label Example A vehicle speciﬁc Tire and Loading Information label is attached to the center pillar (B-pillar) of your vehicle. With the driver’s door open, you will ﬁnd the label attached below the door latch. This label shows the number of occupant seating positions (A), and the maximum vehicle capacity weight (B) in kilograms and pounds.
Page 356 4. The resulting ﬁgure equals the available amount of cargo and luggage load capacity. For example, if the “XXX” amount equals 1400 lbs and there will be ﬁve 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs (1400 750 (5 x 150) = 650 lbs).
Page 357 Example 2 Item Description Vehicle Capacity Weight for Example 2 Subtract Occupant Weight @ 150 lbs (68 kg) x 2 = Available Cargo Weight = Total Item 400 lbs (181 kg) 300 lbs (136 kg) 100 lbs (45 kg) Refer to your vehicle’s Tire and Loading Information label for speciﬁc information about your vehicle’s capacity weight and seating positions.
Page 358 Certiﬁcation Label A vehicle speciﬁc Certiﬁcation label is attached to the rear edge of the driver’s door. It tells you the gross weight capacity of your vehicle, called the Gross Vehicle Weight Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo.
Page 359: Towing
CAUTION: Things you put inside your vehicle can strike and injure people in a sudden stop or turn, or in a crash. • Put things in the rear area of your vehicle. Try to spread the weight evenly. • Never stack heavier things, like suitcases, inside the vehicle so that some of them are above the tops of the seats.
Page 360 NOTES...
Page 361: Service And Appearance Care
Section 6 Service ... 363 Accessories and Modiﬁcations ... 363 California Proposition 65 Warning ... 364 Doing Your Own Service Work ... 364 Adding Equipment to the Outside of Your Vehicle ... 365 Fuel ... 365 Gasoline Octane ... 366 Gasoline Speciﬁcations ...
Page 362 Section 6 When It Is Time for New Tires ... 428 Buying New Tires ... 428 Different Size Tires and Wheels ... 430 Uniform Tire Quality Grading ... 431 Wheel Alignment and Tire Balance ... 432 Wheel Replacement ... 432 Tire Chains ...
Page 363: Service
Service Your dealer knows your vehicle best and wants you to be happy with it. We hope you will go to your dealer for all your service needs. You will get genuine GM parts and GM-trained and supported service people. We hope you will want to keep your GM vehicle all GM.
Page 364: California Proposition 65 Warning
California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems (including some inside the vehicle), many ﬂuids, and some component wear by-products contain and/or emit these chemicals.
Page 365: Adding Equipment To The Outside Of Your Vehicle
Your vehicle has an airbag system. Before attempting to do your own service work, see Servicing Your Airbag-Equipped Vehicle on page 58. You should keep a record with all parts receipts and list the mileage and the date of any service work you perform.
Page 366: Gasoline Octane
Gasoline Octane If your vehicle has the 4.6L V8 engine (VIN Code A), use premium unleaded gasoline with a posted octane rating of 91 or higher. You may also use regular unleaded gasoline rated at 87 octane or higher, but your vehicle’s acceleration may be slightly reduced, and you may notice a slight audible knocking noise, commonly referred to as spark knock.
Page 367: California Fuel
California Fuel If your vehicle is certiﬁed to meet California Emissions Standards, it is designed to operate on fuels that meet California speciﬁcations. See the underhood emission control label. If this fuel is not available in states adopting California emissions standards, your vehicle will operate satisfactorily on fuels meeting federal speciﬁcations, but emission control system performance may be affected.
Page 368: Fuels In Foreign Countries
Gasolines containing oxygenates, such as ethers and ethanol, and reformulated gasolines may be available in your area. General Motors recommends that you use these gasolines if they comply with the speciﬁcations described earlier. However, E85 (85% ethanol) and other fuels containing more than 10% ethanol must not be used in vehicles that were not designed for those fuels.
Page 369: Filling The Tank
Filling the Tank CAUTION: Fuel vapor burns violently and a fuel ﬁre can cause bad injuries. To help avoid injuries to you and others, read and follow all the instructions on the pump island. Turn off your engine when you are refueling.
Page 370 An alternate fuel door release is located inside the trunk behind a panel on the driver’s side of the vehicle. Pull the handle to release the fuel door. To remove the fuel cap, turn it slowly counterclockwise. The fuel cap has a spring in it; if the cap is released too soon, it will spring back to the right.
Page 371: Filling A Portable Fuel Container
The CHECK GAS CAP message in the Driver Information Center (DIC) will be displayed if the fuel cap is not properly installed. CAUTION: If a ﬁre starts while you are refueling, do not remove the nozzle. Shut off the ﬂow of fuel by shutting off the pump or by notifying the station attendant.
Page 372: Checking Things Under The Hood
Checking Things Under the Hood CAUTION: An electric fan under the hood can start up and injure you even when the engine is not running. Keep hands, clothing, and tools away from any underhood electric fan. CAUTION: Things that burn can get on hot engine parts and start a ﬁre.
Page 373: Hood Release
Hood Release To lift the hood, use the following steps: 1. Pull the lever with this symbol on it. It is located on the lower left side of the instrument panel. 2. Then go to the front of the vehicle and ﬁnd the secondary hood release lever.
Page 374: Engine Compartment Overview
Engine Compartment Overview When you open the hood on the 4.6L V8 engine, here is what you will see:...
Page 375 A. Battery. See Battery on page 402. B. Passenger Compartment Air Filter. See Passenger Compartment Air Filter on page 184. C. Underhood Fuse Block. See Underhood Fuse Block on page 455. D. Power Steering Fluid. See Power Steering Fluid on page 396. E.
Page 376 When you open the hood on the 4.4L V8 XLR-V engine, here is what you will see:...
Page 377: Checking Engine Oil
A. Battery. See Battery on page 402. B. Passenger Compartment Air Filter. See Passenger Compartment Air Filter on page 184. C. Underhood Fuse Block. See Underhood Fuse Block on page 455. D. Power Steering Fluid. See Power Steering Fluid on page 396. E.
Page 378: When To Add Engine Oil
When to Add Engine Oil If the oil is below the cross-hatched area at the tip of the dipstick, you will need to add at least one quart/liter of oil. But you must use the right kind. This section explains what kind of oil to use. For engine oil crankcase capacity, see Capacities and Speciﬁcations on page 458.
Page 379: What Kind Of Engine Oil To Use
What Kind of Engine Oil to Use Look for two things: • GM4718M Your vehicle’s engine requires a special oil meeting GM Standard GM4718M. Oils meeting this standard may be identiﬁed as synthetic. However, not all synthetic oils will meet this GM standard.
Page 380: Engine Oil Additives
Your vehicle’s engine is ﬁlled at the factory with a ® Mobil 1 synthetic oil, which meets all requirements for your vehicle. Substitute Engine Oil: When adding oil to maintain engine oil level, oil meeting GM Standard GM4718M may not be available. You can add substitute oil designated SAE 5W-30 with the starburst symbol at all temperatures.
Page 381 When the system has calculated that oil life has been diminished, it will indicate that an oil change is necessary. A CHANGE OIL NOW message in the DIC will come on. See DIC Warnings and Messages on page 206. Change your oil as soon as possible within the next 600 miles (1 000 km).
Page 382: Supercharger Oil
What to Do with Used Oil Used engine oil contains certain elements that may be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner.
Page 383 How to Inspect the Engine Air Cleaner/Filters To inspect the air cleaner/ﬁlters, remove the ﬁlters from the vehicle and lightly shake the ﬁlters to release loose dust and dirt. If the ﬁlters remain caked with dirt, new ﬁlters are required. To inspect or replace the ﬁlters, do the following: 1.
Page 384: Automatic Transmission Fluid
5. Inspect or replace the ﬁlter. 6. Repeat the procedure for the second air cleaner/ﬁlter. Reverse the above procedure to reinstall the engine air cleaner ﬁlter housings. CAUTION: Operating the engine with the air cleaner/ﬁlter off can cause you or others to be burned.
Page 385: Engine Coolant
Change the ﬂuid and ﬁlter at the intervals listed in Additional Required Services on page 467, and be sure to use the ﬂuid listed in Recommended Fluids and Lubricants on page 473. Engine Coolant The cooling system in your vehicle is ﬁlled with ®...
Page 386: What To Use
What to Use Use a mixture of one-half clean, drinkable water ® and one-half DEX-COOL coolant which will not damage aluminum parts. If you use this coolant mixture, you do not need to add anything else. CAUTION: Adding only plain water to your cooling system can be dangerous.
Page 387: Checking Coolant
Checking Coolant The engine coolant surge tank is located toward the rear of the engine compartment on the driver’s side of the vehicle. For more information on location, see Engine Compartment Overview on page 374. CAUTION: Turning the surge tank pressure cap when the engine and radiator are hot can allow steam and scalding liquids to blow out and burn you badly.
Page 388: Coolant Surge Tank Pressure Cap
Adding Coolant If you need more coolant, add the proper ® DEX-COOL coolant mixture at the surge tank, but only when the engine is cool. CAUTION: You can be burned if you spill coolant on hot engine parts. Coolant contains ethylene glycol, and it will burn if the engine parts are hot enough.
Page 389: If No Steam Is Coming From Your Engine
If Steam Is Coming From Your Engine CAUTION: Steam from an overheated engine can burn you badly, even if you just open the hood. Stay away from the engine if you see or hear steam coming from it. Turn it off and get everyone away from the vehicle until it cools down.
Page 390: Overheated Engine Protection Operating Mode
If you get the overheat warning with no sign of steam, try this for a minute or so: 1. In heavy traffic, let the engine idle in NEUTRAL (N) while stopped. If it is safe to do so, pull off the road, shift to PARK (P) or NEUTRAL (N) and let the engine idle.
Page 391: Cooling System
Cooling System When you decide it is safe to lift the hood, here is what you will see: A. Electric Engine Cooling Fan B. Coolant Surge Tank with Pressure Cap CAUTION: An electric engine cooling fan under the hood can start up even when the engine is not running and can injure you.
Page 392 A low coolant level should be indicated by a LOW COOLANT message on the Driver Information Center (DIC). If it is, you may have a leak at the pressure cap or in the radiator hoses, heater hoses, radiator, water pump, or somewhere else in the cooling system.
Page 393: How To Add Coolant To The Coolant Surge Tank
How to Add Coolant to the Coolant Surge Tank If you have not found a problem yet, check to see if coolant is visible in the surge tank. If coolant is visible but the coolant level is not at the FULL COLD mark on the front of the coolant surge tank, add a 50/50 mixture of clean, drinkable water ®...
Page 394 CAUTION: Adding only plain water to your cooling system can be dangerous. Plain water, or some other liquid such as alcohol, can boil before the proper coolant mixture will. Your vehicle’s coolant warning system is set for the proper coolant mixture. With plain water or the wrong mixture, your engine could get too hot but you would not get the overheat warning.
Page 395 1. You can remove the coolant surge tank pressure cap when the cooling system, including the coolant surge tank pressure cap and upper radiator hose, is no longer hot. Turn the pressure cap slowly counterclockwise. If you hear a hiss, wait for that to stop. A hiss means there is still some pressure left.
Page 396: Power Steering Fluid
4. With the coolant surge tank pressure cap off, start the engine and let it run until you can feel the upper radiator hose getting hot. Watch out for the engine cooling fan. By this time, the coolant level inside the coolant surge tank may be lower.
Page 397: When To Check Power Steering Fluid
When to Check Power Steering Fluid It is not necessary to regularly check power steering ﬂuid unless you suspect there is a leak in the system or you hear an unusual noise. A ﬂuid loss in this system could indicate a problem. Have the system inspected and repaired.
Page 398: Adding Washer Fluid
Adding Washer Fluid The LOW WASHER FLUID message will be displayed on the Driver Information Center (DIC) when the ﬂuid is low. Open the cap with the washer symbol on it. Add washer ﬂuid until the tank is full. See Engine Compartment Overview on page 374 for reservoir location.
Page 399: Brakes
Brakes Brake Fluid Your brake master cylinder reservoir is ﬁlled with DOT-3 brake ﬂuid. See Engine Compartment Overview on page 374 for the location of the reservoir. There are only two reasons why the brake ﬂuid level in the reservoir might go down. The ﬁrst is that the brake ﬂuid goes down to an acceptable level during normal brake lining wear.
Page 400 Checking Brake Fluid You can check the brake ﬂuid without taking off the cap. Look at the brake ﬂuid reservoir. The ﬂuid level should be above the MIN mark on the reservoir. If it is not, have your brake system checked to see if there is a leak.
Page 401: Brake Wear
Brake Wear Your vehicle has four-wheel disc brakes. Disc brake pads have built-in wear indicators that make a high-pitched warning sound when the brake pads are worn and new pads are needed. The sound may come and go or be heard all the time your vehicle is moving, except when you are pushing on the brake pedal ﬁrmly.
Page 402: Battery
Battery Your vehicle has a maintenance free battery. When it is time for a new battery, get one that has the replacement number shown on the original battery’s label. We recommend an ACDelco replacement battery. For battery replacement, see your dealer or the service manual.
Page 403: Jump Starting
Jump Starting If your vehicle’s battery has run down, you may want to use another vehicle and some jumper cables to start your vehicle. Be sure to use the following steps to do it safely. CAUTION: Batteries can hurt you. They can be dangerous because: •...
Page 404 Notice: If you leave your radio or other accessories on during the jump starting procedure, they could be damaged. The repairs would not be covered by your warranty. Always turn off your radio and other accessories when jump starting your vehicle. 3.
Page 405 CAUTION: Fans or other moving engine parts can injure you badly. Keep your hands away from moving parts once the engine is running. 5. Check that the jumper cables do not have loose or missing insulation. If they do, you could get a shock.
Page 406 8. Now connect the black negative ( ) cable to the negative ( ) terminal of the good battery. Use a remote negative ( ) terminal if the vehicle has one. Do not let the other end touch anything until the next step.
Page 407: Rear Axle
To disconnect the jumper cables from both vehicles, do the following: 1. Disconnect the black negative ( ) cable from the vehicle that had the dead battery. 2. Disconnect the black negative ( ) cable from the vehicle with the good battery. 3.
Page 408: Headlamp Aiming
What to Use To add lubricant when the level is low, use SAE 75W–90 Synthetic Gear Lubricant (GM Part No. 89021677) or equivalent meeting GM Speciﬁcation 9986115. To completely reﬁll after draining, add 4 ounces (118 ml) of Limited-Slip Differential Lubricant Additive (GM Part No.
Page 409 The vehicle should be properly prepared as follows: • The vehicle should be placed so the headlamps are 25 ft (7.6 m) from a light colored wall. • The vehicle must have all four tires on a perfectly level surface which is level all the way to the wall.
Page 410: Headlamp Vertical Aiming
Headlamp Vertical Aiming To properly prepare the vehicle for vertical headlamp aiming see Headlamp Aiming on page 408 for more information. To adjust the vertical aim, do the following: Notice: Horizontal aiming must be performed before making any adjustments to the vertical aim.
Page 411 7. Locate the vertical headlamp aiming screws, which are under the hood near each headlamp assembly. The adjustment screw can be turned with a 6 mm male hex. 8. Turn the vertical aiming screw until the headlamp beam is aimed to the horizontal tape line.
Page 412: Bulb Replacement
Bulb Replacement It is recommended that all bulbs be replaced by your dealer. Windshield Replacement Keep in mind that your windshield is part of the Head-Up Display (HUD) system. If you ever have to get your windshield replaced, be sure to get one that is designed for HUD or your HUD image may look blurred or out of focus.
Page 413: Tires
Tires Your new vehicle comes with high-quality tires made by a leading tire manufacturer. If you ever have questions about your tire warranty and where to obtain service, see your GM Warranty booklet for details. For additional information refer to the tire manufacturer’s booklet included with your vehicle.
Page 414: Winter Tires (Xlr-V)
Low-Proﬁle Tires (XLR-V) Notice: If your vehicle has P235/45R19 or P255/40R19 size tires, they are classiﬁed as low-proﬁle tires. Low-proﬁle tires are more susceptible to damage from road hazards or curb impact than standard proﬁle tires. Tire and or wheel assembly damage can occur when coming into contact with road hazards like potholes or sharp edged objects, or when sliding into a curb.
Page 415: Tire Sidewall Labeling
Tire Sidewall Labeling Useful information about a tire is molded into its sidewall. The example below shows a typical passenger (p-metric) tire sidewall. Passenger (P-Metric) Tire Example (A) Tire Size: The tire size is a combination of letters and numbers used to deﬁne a particular tire’s width, height, aspect ratio, construction type, and service description.
Page 416 (E) Tire Ply Material: The type of cord and number of plies in the sidewall and under the tread. (F) Uniform Tire Quality Grading (UTQG): Tire manufacturers are required to grade tires based on three performance factors: treadwear, traction and temperature resistance. For more information see Uniform Tire Quality Grading on page 431.
Page 417: Tire Terminology And Deﬁnitions
(E) Rim Diameter: Diameter of the wheel in inches. (F) Service Description: These characters represent the load range and speed rating of the tire. The load index represents the load carry capacity a tire is certiﬁed to carry. The load index can range from 1 to 279.
Page 418 DOT Markings: A code molded into the sidewall of a tire signifying that the tire is in compliance with the U.S. Department of Transportation (DOT) motor vehicle safety standards. The DOT code includes the Tire Identiﬁcation Number (TIN), an alphanumeric designator which can also identify the tire manufacturer, production plant, brand, and date of production.
Page 419 Occupant Distribution: Designated seating positions. Outward Facing Sidewall: The side of an asymmetrical tire that has a particular side that faces outward when mounted on a vehicle. The side of the tire that contains a whitewall, bears white lettering, or bears manufacturer, brand, and/or model name molding that is higher or deeper than the same moldings on the other sidewall of the tire.
Page 420: Run-Flat Tires
Vehicle Capacity Weight: The number of designated seating positions multiplied by 150 lbs (68 kg) plus the rated cargo load. See Loading Your Vehicle on page 354. Vehicle Maximum Load on the Tire: Load on an individual tire due to curb weight, accessory weight, occupant weight, and cargo weight.
Page 421 Some road hazards can damage a tire beyond repair. This damage could occur even before you have driven on the tire in a deﬂated condition. When a tire has been damaged, or if you have driven any distance on a run-ﬂat tire, check with an authorized run-ﬂat tire service center to determine whether the tire can be repaired or should be replaced.
Page 422: Inﬂation - Tire Pressure
Inﬂation - Tire Pressure Tires need the correct amount of air pressure to operate effectively. Notice: Do not let anyone tell you that under-inﬂation or over-inﬂation is all right. It is not. If your tires do not have enough air (under-inﬂation), you can get the following: •...
Page 423: How To Check
How to Check Use a good quality pocket-type gage to check tire pressure. You cannot tell if your tires are properly inﬂated simply by looking at them. Radial tires may look properly inﬂated even when they are underinﬂated. Check the tire’s inﬂation pressure when the tires are cold.
Page 424 When a low tire pressure condition is detected, the TPMS illuminates the low tire pressure warning light, located in the instrument panel cluster, and at the same time the LOW TIRE PRESSURE warning message on the Driver Information Center (DIC) displays. The low tire pressure warning light and the DIC warning message appear at each ignition cycle until the tires are inﬂated to the correct inﬂation pressure.
Page 425 Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver’s responsibility to maintain correct tire pressure, even if under-inﬂation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Page 426: Tire Inspection And Rotation
TPMS Sensor Identiﬁcation Codes Each TPMS sensor has a unique identiﬁcation code. Any time you replace one or more of the TPMS sensors or rotate your vehicle’s tires, the identiﬁcation codes will need to be matched to the new tire/wheel position. The sensors are matched to the tire/wheel positions in the following order: driver’s side front tire, passenger’s side front tire, passenger’s side rear tire, and driver’s...
Page 427 When rotating P235/50R18 size tires, always use the correct rotation pattern shown here. After the tires have been rotated, adjust the front and rear inﬂation pressures as shown on the Tire and Loading Information label, see Inﬂation - Tire Pressure on page 422 and Loading Your Vehicle on page 354.
Page 428: When It Is Time For New Tires
When It Is Time for New Tires One way to tell when it is time for new tires is to check the treadwear indicators, which will appear when your tires have only 1/16 inch (1.6 mm) or less of tread remaining.
Page 429 Winter tires with the same speed rating as your original equipment tires may not be available for H, V, W, Y, and ZR speed rated tires. If you choose snow tires with a lower speed rating, never exceed the tire’s maximum speed capability. CAUTION: Mixing tires could cause you to lose control while driving.
Page 430: Different Size Tires And Wheels
Your vehicle’s original equipment tires are listed on the Tire and Loading Information label. This label is attached to the vehicle’s center pillar (B-pillar). See Loading Your Vehicle on page 354 for more information about the Tire and Loading Information label and its location on your vehicle. Different Size Tires and Wheels If you add wheels or tires that are a different size than your original equipment wheels and tires,...
Page 431: Uniform Tire Quality Grading
Uniform Tire Quality Grading Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A The following information relates to the system developed by the United States National Highway Traffic Safety Administration (NHTSA), which grades tires by treadwear, traction, and temperature performance.
Page 432: Wheel Alignment And Tire Balance
Temperature – A, B, C The temperature grades are A (the highest), B, and C, representing the tire’s resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a speciﬁed indoor laboratory test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure.
Page 433 If you need to replace any of your wheels, wheel bolts or wheel nuts, replace them only with new GM original equipment parts. This way, you will be sure to have the right wheel, wheel bolts, and wheel nuts for your vehicle. CAUTION: Using the wrong replacement wheels, wheel bolts, or wheel nuts on your vehicle...
Page 434 Tightening Wheel Lug Nuts CAUTION: Incorrect wheel nuts or improperly tightened wheel nuts can cause the wheel to become loose and even come off. This could lead to a crash. Be sure to use the correct wheel nuts. If you have to replace them, be sure to get new GM original equipment wheel nuts.
Page 435: Tire Chains
Tire Chains CAUTION: Do not use tire chains. There is not enough clearance. Tire chains used on a vehicle without the proper amount of clearance can cause damage to the brakes, suspension, or other vehicle parts. The area damaged by the tire chains could cause you to lose control of your vehicle and you or others may be injured in a crash.
Page 436 • Make sure the jack you are using spans at least two crossmember ribs. • Lift only in the areas shown in the following pictures. For additional information, see your GM dealer and the Cadillac XLR service manual.
Page 437: Lifting From The Front
Lifting From the Front The front lifting points can be accessed from either side of your vehicle, behind the front tires. 1. Locate the front lifting points (A), according to the illustration shown. 2. Be sure to place a block or pad between the jack and the vehicle.
Page 438: Lifting From The Rear
3. Lift the vehicle with the jack, making sure the jack spans at least two of the crossmember ribs (B). Lifting From the Rear The rear lifting points can be accessed from the rear of the vehicle, on either the driver’s or passenger’s side.
Page 439 1. Locate the rear lifting points (A), according to the illustration shown. 2. Be sure to place a block or pad between the jack and the vehicle. 3. Lift the vehicle with the jack, making sure the jack spans at least two of the crossmember ribs (B).
Page 440: If A Tire Goes Flat
If a Tire Goes Flat It is unusual for a tire to “blow out” while you are driving, especially if you maintain your tires properly. If air goes out of a tire, it is much more likely to leak out slowly. See Tires on page 413 for additional information.
Page 441: Appearance Care
CAUTION: Special tools and procedures are required to service a run-ﬂat tire. If these special tools and procedures are not used you or others could be injured and your vehicle could be damaged. Always be sure the proper tools and procedures, as described in the service manual, are used.
Page 442 When cleaning your vehicle’s interior, only use cleaners speciﬁcally designed for the surfaces being cleaned. Permanent damage may result from using cleaners on surfaces for which they were not intended. Use glass cleaner only on glass. Remove any accidental over-spray from other surfaces immediately.
Page 443: Fabric/Carpet
• Do not heavily saturate your upholstery while cleaning. • Damage to your vehicle’s interior may result from the use of many organic solvents such as naptha, alcohol, etc. Fabric/Carpet Use a vacuum cleaner with a soft brush attachment frequently to remove dust and loose dirt.
Page 444: Leather
Leather A soft cloth dampened with water may be used to remove dust. If a more thorough cleaning is necessary, a soft cloth dampened with a mild soap solution can be used. Allow the leather to dry naturally. Do not use heat to dry. Never use steam to clean leather.
Page 445: Wood Panels
Wood Panels Use a clean cloth moistened in warm, soapy water (use mild dish washing soap). Dry the wood immediately with a clean cloth. Speaker Covers Vacuum around a speaker cover gently, so that the speaker will not be damaged. Clean spots with just water and mild soap.
Page 446: Washing Your Vehicle
Washing Your Vehicle The paint ﬁnish on the vehicle provides beauty, depth of color, gloss retention, and durability. The best way to preserve the vehicle’s ﬁnish is to keep it clean by washing it often with lukewarm or cold water. Do not wash the vehicle in the direct rays of the sun.
Page 447: Finish Care
Finish Care Occasional waxing or mild polishing of the vehicle by hand may be necessary to remove residue from the paint ﬁnish. Approved cleaning products can be obtained from your dealer. See Vehicle Care/Appearance Materials on page 450. Notice: Machine compounding or aggressive polishing on a basecoat/clearcoat paint ﬁnish may damage it.
Page 448: Aluminum Or Chrome-Plated Wheels
Aluminum or Chrome-Plated Wheels Your vehicle may have either aluminum or chrome-plated wheels. Keep the wheels clean using a soft clean cloth with mild soap and water. Rinse with clean water. After rinsing thoroughly, dry with a soft clean towel. A wax may then be applied. Notice: If you use strong soaps, chemicals, abrasive polishes, cleaners, brushes, or cleaners that contain acid on aluminum or...
Page 449: Tires
Tires To clean the tires, use a stiff brush with tire cleaner. Notice: Using petroleum-based tire dressing products on your vehicle may damage the paint ﬁnish and/or tires. When applying a tire dressing, always wipe off any overspray from all painted surfaces on your vehicle. Sheet Metal Damage If the vehicle is damaged and requires sheet metal repair or replacement, make sure the body...
Page 450: Chemical Paint Spotting
Chemical Paint Spotting Some weather and atmospheric conditions can create a chemical fallout. Airborne pollutants can fall upon and attack painted surfaces on the vehicle. This damage can take two forms: blotchy, ring-shaped discolorations, and small, irregular dark spots etched into the paint surface. Although no defect in the paint job causes this, GM will repair, at no charge to the owner, the surfaces of new vehicles damaged by this fallout condition...
Page 451: Vehicle Identiﬁcation
Vehicle Identiﬁcation Vehicle Identiﬁcation Number (VIN) This is the legal identiﬁer for your vehicle. It appears on a plate in the front corner of the instrument panel, on the driver’s side. You can see it if you look through the windshield from outside your vehicle.
Page 452: Electrical System
Electrical System Add-On Electrical Equipment Notice: Do not add anything electrical to your vehicle unless you check with your dealer ﬁrst. Some electrical equipment can damage your vehicle and the damage would not be covered by your warranty. Some add-on electrical equipment can keep other components from working as they should.
Page 453: Fuses And Circuit Breakers
Fuses and Circuit Breakers The wiring circuits in your vehicle are protected from short circuits by a combination of fuses and circuit breakers. This greatly reduces the chance of ﬁres caused by electrical problems. Look at the silver-colored band inside the fuse. If the band is broken or melted, replace the fuse.
Page 454 Fuses Spare Fuse Fuse Pull Reverse Lamp Starter/Crank Parking Brake Solenoid A Reverse Lamps BTSI Solenoid, Column Lock Not Used Not Used GMLAN Devices Rear Park Aid, Heated/Cooled Seats, Windshield Wiper Relays Door Locks Engine Control Module Interior Lights Airbags Not Used ®...
Page 455: Underhood Fuse Block
Fuses Usage Driver’s Side Heated Seat Not Used Retractable Hardtop, Trunk Latch Auxiliary Power Cigar Lighter Relays Usage Park Brake Hold Park Brake Release Not Used Not Used Not Used Fuel Door Underhood Fuse Block The underhood fuse block is located next to the engine on the passenger’s side of the vehicle.
Page 456 Fuses Anti-lock Brake System, Electronic Suspension Control, Adaptive Forward Lighting System (AFS) Horn Adaptive Cruise Control (ACC), Transmission Controls Windshield Wipers Stop/Back-Up Lamps Oxygen Sensor Battery 5 Parking Lamps Usage Fuses Usage Electronic Throttle Control Fuel Pump Engine Control Module, Transmission Control Module Odd Injectors Electronic Suspension Control...
Page 457 Fuses Usage Starter Audio Ampliﬁer Not Used Battery 1 Spare Spare Spare Spare Spare Not Used Fuse Puller Relays Usage Horn Air Conditioning Compressor Windshield Washer Parking Lamps Fog Lamps High Beam Headlamps Relays Usage Rear Window Defogger Windshield Wiper High/Low Wiper RUN/ACCESSORY Power Starter/Crank Ignition 1...
Page 458: Capacities And Speciﬁcations
Capacities and Speciﬁcations The following approximate capacities are given in English and metric conversions. Please refer to Recommended Fluids and Lubricants on page 473 for more information. Application Air Conditioning Refrigerant R134a Automatic Transmission (Pan Removal and Replacement) 6-Speed Automatic Cooling System Engine Oil with Filter –...
Page 459: Engine Specifications
Engine 4.4L V8 4.6L V8 Engine Horsepower 443 hp (330 kW) @ 4.4L V8 (V-Series) 6400 rpm Engine Speciﬁcations VIN Code Transmission Automatic Automatic XLR-V Engine Data Torque 414 lb ft (561 N m) @ 3900 rpm Spark Plug Gap 0.040 inches (1.02 mm) 0.050 inches (1.27 mm) Displacement...
Page 460 NOTES...
Page 461 Section 7 Maintenance Schedule ... 462 Introduction ... 462 Maintenance Requirements ... 462 Your Vehicle and the Environment ... 462 Using the Maintenance Schedule ... 463 Scheduled Maintenance ... 465 Additional Required Services ... 467 Maintenance Footnotes ... 469 Maintenance Schedule Owner Checks and Services ...
Page 462: Maintenance Schedule
Maintenance Schedule Introduction Important: Keep engine oil at the proper level and change as recommended. Have you purchased the GM Protection Plan? The Plan supplements your new vehicle warranties. See your Warranty and Owner Assistance booklet or your dealer for details. Maintenance Requirements Notice: Maintenance intervals, checks, inspections, replacement parts, and...
Page 463: Using The Maintenance Schedule
Using the Maintenance Schedule We at General Motors want to help you keep your vehicle in good working condition. But we do not know exactly how you will drive it. You may drive very short distances only a few times a week. Or you may drive long distances all the time in very hot, dusty weather.
Page 464 CAUTION: Performing maintenance work on a vehicle can be dangerous. In trying to do some jobs, you can be seriously injured. Do your own maintenance work only if you have the required know-how and the proper tools and equipment for the job. If you have any doubt, see your GM ®...
Page 465: Scheduled Maintenance
Scheduled Maintenance When the CHANGE OIL NOW message in the Driver Information Center (DIC) comes on, it means that service is required for your vehicle. Have your vehicle serviced as soon as possible within the next 600 miles (1 000 km). It is possible that, if you are driving under the best conditions, the engine oil life system may not indicate that vehicle service is necessary for over a year.
Page 466 Maintenance I — Use Maintenance I if the CHANGE OIL NOW message comes on within 10 months since the vehicle was purchased or Maintenance II was performed. Change engine oil and ﬁlter. See Engine Oil on page 377. Reset oil life system. See Engine Oil Life System on page 380.
Page 467: Additional Required Services
Additional Required Services The following services should be performed at the ﬁrst maintenance service (I or II) after the indicated miles (kilometers) shown for each item. Service and Miles (Kilometers) Inspect fuel system for damage or leaks. Inspect exhaust system for loose or damaged components.
Page 468 Additional Required Services (cont’d) 25,000 50,000 75,000 100,000 125,000 150,000 Service and Miles (Kilometers) (40 000) (80 000) (120 000) (160 000) (200 000) (240 000) Replace spark plugs. An Emission Control Service. Engine cooling system service (or every ﬁve years, whichever occurs ﬁrst).
Page 469: Maintenance Footnotes
Maintenance Footnotes (a) A ﬂuid loss in any vehicle system could indicate a problem. Have the system inspected and repaired and the ﬂuid level checked. Add ﬂuid if needed. (b) Visually inspect wiper blades for wear or cracking. Replace wiper blades that appear worn or damaged or that streak or miss areas of the windshield.
Page 470: Owner Checks And Services
(h) If you drive regularly under dusty conditions, inspect the ﬁlter at each engine oil change. (j) Visually inspect belt for fraying, excessive cracks, or obvious damage. Replace belt if necessary. (k) Drain, ﬂush, and reﬁll intercooler system. This service can be complex; you should have your dealer perform this service.
Page 471: At Least Once A Month
Intercooler Coolant Level Check (4.4L Supercharged Engine) Check the coolant level and add DEX-COOL coolant mixture if necessary. See Engine Coolant on page 385 for further details. Windshield Washer Fluid Level Check Check the windshield washer ﬂuid level in the windshield washer ﬂuid reservoir and add the proper ﬂuid if necessary.
Page 472 Transmission Shift Lock Control System Check CAUTION: When you are doing this inspection, the vehicle could move suddenly. If the vehicle moves, you or others could be injured. 1. Before you start, be sure you have enough room around the vehicle. It should be parked on a level surface.
Page 473: Underbody Flushing Service
Park on a fairly steep hill, with the vehicle facing downhill. Keeping your foot on the regular brake, set the parking brake. • To check the parking brake’s holding ability: With the engine running and transmission in NEUTRAL (N), slowly remove foot pressure from the regular brake pedal.
Page 474 Usage Fluid/Lubricant Intercooler System 50/50 mixture of clean, drinkable (4.4L V8 water and use only DEX-COOL Supercharged Coolant. engine) ® Hydraulic Brake Delco Supreme 11 Brake Fluid or System equivalent DOT-3 brake ﬂuid. Windshield ® GM Optikleen Washer GM Power Steering Fluid Power Steering (GM Part No.
Page 475: Normal Maintenance Replacement Parts
Normal Maintenance Replacement Parts Replacement parts identiﬁed below by name, part number, or speciﬁcation can be obtained from your dealer. Part Engine Air Cleaner/Filter Elements 4.4 L V8 Engine 4.6 L V8 Engine Engine Oil Filter 4.4 L V8 Engine 4.6 L V8 Engine Passenger Compartment Air Filter Element Spark Plugs...
Page 476: Engine Drive Belt Routing
Engine Drive Belt Routing 4.4L V8 Engine 4.6L V8 Engine...
Page 477: Maintenance Record
Maintenance Record After the scheduled services are performed, record the date, odometer reading, who performed the service, and the type of services performed in the boxes provided. See Maintenance Requirements on page 462. Any additional information from Owner Checks and Services on page 470 can be added on the following record pages.
Page 478 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 479 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 480 Maintenance Record (cont’d) Odometer Maintenance I or Date Serviced By Services Performed Reading Maintenance II...
Page 481: Customer Assistance Information
Section 8 Customer Assistance and Information ... 482 Customer Satisfaction Procedure ... 482 Online Owner Center ... 484 Customer Assistance for Text Telephone (TTY) Users ... 485 Customer Assistance Offices ... 485 GM Mobility Reimbursement Program ... 486 Roadside Service ... 487 Courtesy Transportation ...
Page 482: Customer Assistance And Information
Information Customer Satisfaction Procedure Your satisfaction and goodwill are important to your dealer and to Cadillac. Normally, any concerns with the sales transaction or the operation of your vehicle will be resolved by your dealer’s sales or service departments. Sometimes, however, despite the best intentions of all concerned, misunderstandings can occur.
Page 483 STEP THREE: Both General Motors and your dealer are committed to making sure you are completely satisﬁed with your new vehicle. However, if you continue to remain unsatisﬁed after following the procedure outlined in Steps One and Two, you should ﬁle with the BBB Auto Line Program to enforce any additional rights you may have.
Page 484: Online Owner Center
Online Owner Center Online Owner Center (United States only) The Owner Center is a resource for your GM ownership needs. Speciﬁc vehicle information can be found in one place. The Online Owner Center allows you to: • Get e-mail service reminders. •...
Page 485: Customer Assistance For Text Telephone (Tty) Users
Text Telephones (TTYs), Cadillac has TTY equipment available at its Customer Assistance Center. Any TTY user can communicate with Cadillac by dialing: 1-800-833-CMCC (2622). (TTY users in Canada can dial 1-800-263-3830.) Customer Assistance Offices Cadillac encourages customers to call the toll-free number for assistance.
Page 486: Canada - Customer Assistance
Canada — Customer Assistance General Motors of Canada Limited Canadian Cadillac Customer Communication Centre, CA1-163-005 1908 Colonel Sam Drive Oshawa, Ontario L1H 8P7 1-888-446-2000 1-800-263-3830 (For Text Telephone devices (TTYs)) Roadside Assistance: 1-800-882-1112 Overseas — Customer Assistance Please contact the local General Motors Business Unit.
Page 487: Roadside Service
This service is provided at no charge for any situation covered by the base warranty coverage and at a nominal charge if the Cadillac is no longer covered by the base warranty. Roadside Service is available only in the United States and Canada.
Page 488: Courtesy Transportation
A description of the problem • Name, home address, home telephone number • Location of your Cadillac and number you are calling from • The model year, Vehicle Identiﬁcation Number (VIN), mileage, and date of delivery Roadside Service for the Hearing or...
Page 489: Scheduling Service Appointments
Scheduling Service Appointments When your vehicle requires warranty service, you should contact your dealer and request an appointment. By scheduling a service appointment and advising your service consultant of your transportation needs, your dealer can help minimize your inconvenience. If your vehicle cannot be scheduled into the service department immediately, keep driving it until it can be scheduled for service, unless, of course, the problem is safety-related.
Page 490: Additional Program Information
Courtesy Rental Vehicle Your dealer may arrange to provide you with a courtesy rental vehicle or reimburse you for a rental vehicle that you obtain if your vehicle is kept for a warranty repair. Reimbursement will be limited to a maximum amount per day and must be supported by receipts.
Page 491: Vehicle Data Collection And Event Data Recorders
Vehicle Data Collection and Event Data Recorders Your vehicle, like other modern motor vehicles, has a number of sophisticated computer systems that monitor and control several aspects of the vehicle’s performance. Your vehicle uses on-board vehicle computers to monitor emission control components to optimize fuel economy, to monitor conditions for airbag deployment and, if so equipped, to provide anti-lock braking and to help the driver control the...
Page 492: Collision Damage Repair
In addition, once GM collects or receives data, GM may: • use the data for GM research needs, • make it available for research where appropriate conﬁdentiality is to be maintained and need is shown, or • share summary data which is not tied to a speciﬁc vehicle with non-GM organizations for research purposes.
Page 493: Repair Facility
A recycled original equipment GM part, may be an acceptable choice to maintain your vehicle’s originally designed appearance and safety performance, however, the history of these parts is not known. Such parts are not covered by your GM New Vehicle Limited Warranty, and any related failures are not covered by that warranty.
Page 494: If An Accident Occurs
If an Accident Occurs Here is what to do if you are involved in an accident. • Try to relax and then check to make sure you are all right. If you are uninjured, make sure that no one else in your vehicle, or the other vehicle, is injured.
Page 495: Managing The Vehicle Damage Repair Process
• Choose a reputable collision repair facility for your vehicle. Whether you select a GM dealer or a private collision repair facility to ﬁx the damage, make sure you are comfortable with them. Remember, you will have to feel comfortable with their work for a long time. •...
Page 496: Reporting Safety Defects
Reporting Safety Defects Reporting Safety Defects to the United States Government If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA), in addition to notifying General Motors.
Page 497: Reporting Safety Defects To General Motors
In addition to notifying NHTSA (or Transport Canada) in a situation like this, we certainly hope you will notify us. Please call us at 1-800-458-8006, or write: Cadillac Customer Assistance Center Cadillac Motor Car Division P.O. Box 33169 Detroit, MI 48232-5169 In Canada, please call us at 1-888-446-2000.
Page 498: Owner's Information
Owner’s Information Owner publications are written speciﬁcally for owners and intended to provide basic operational information about the vehicle. The owner’s manual will include the Maintenance Schedule for all models. In-Portfolio: Includes a Portfolio, Owner’s Manual, and Warranty Booklet. RETAIL SELL PRICE: $35.00 Without Portfolio: Owner’s Manual only.
Page 499 Accessories and Modiﬁcations ... 363 Accessory Power Outlet(s) ... 177 Adaptive Cruise Control ... 150 Adaptive Forward Lighting System ... 167 Adding Equipment to Your Airbag-Equipped Vehicle ... 59 Additives, Fuel ... 367 Add-On Electrical Equipment ... 452 Air Cleaner/Filter, Engine ... 382 Air Conditioning ...
Page 500 Appearance Care (cont.) Weatherstrips ... 445 Windshield and Wiper Blades ... 447 Wood Panels ... 445 Ashtray(s) ... 178 Audio System ... 285 Audio System(s) ... 225 Audio Steering Wheel Controls ... 227 Care of Your CD Player ... 230 Care of Your CDs ...
Page 501 Center Console Storage Area ... 122 Chains, Tire ... 435 Charging System Light ... 191 Check Engine Light ... 196 Checking Things Under the Hood ... 372 Chemical Paint Spotting ... 450 Child Restraints Child Restraint Systems ... 35 Infants and Young Children ... 31 Lower Anchors and Tethers for Children ...
Page 502 Customer Assistance Information (cont.) Customer Satisfaction Procedure ... 482 GM Mobility Reimbursement Program ... 486 Reporting Safety Defects to General Motors ... 497 Reporting Safety Defects to the Canadian Government ... 496 Reporting Safety Defects to the United States Government ... 496 Roadside Service ...
Page 503 Edit Avoid Point/Area ... 257 Memory Point ... 250 Waypoint ... 254 Electrical System Add-On Equipment ... 452 Fuses and Circuit Breakers ... 453 Instrument Panel Fuse Block ... 453 Power Windows and Other Power Options ... 452 Underhood Fuse Block ... 455 Windshield Wiper Fuses ...
Page 504 Fuel ... 365 Additives ... 367 California Fuel ... 367 Filling a Portable Fuel Container ... 371 Filling Your Tank ... 369 Fuels in Foreign Countries ... 368 Gage ... 202 Gasoline Octane ... 366 Gasoline Speciﬁcations ... 366 Fuses Fuses and Circuit Breakers ...
Page 505 Heated Seats ... 9 Heater ... 178 Highbeam On Light ... 202 Highway Hypnosis ... 346 Hill and Mountain Roads ... 347 Hood Checking Things Under ... 372 Release ... 373 Horn ... 140 How to Use This Manual ... 4 How to Wear Safety Belts Properly ...
Page 506 Light (cont.) Lights On Reminder ... 202 Malfunction Indicator ... 196 Passenger Airbag Status Indicator ... 189 Safety Belt Reminder ... 187 Security ... 201 TCS Warning Light ... 194 Tire Pressure ... 196 Traction Control System (TCS) Warning ... 194 Lighting Entry/Exit ...
Page 507 Message DIC Warnings and Messages ... 206 Mirrors Automatic Dimming Rearview with ® OnStar ... 104 Outside Automatic Dimming Mirror ... 105 Outside Convex Mirror ... 106 Outside Curb View Assist Mirror ... 106 Outside Power Heated Mirrors ... 105 MyGMLink.com ...
Page 508 Paint, Damage ... 449 Park Aid ... 175 Park (P) Shifting Into ... 99 Shifting Out of ... 100 Parking Assist ... 175 Brake ... 97 Over Things That Burn ... 101 Passenger Airbag Status Indicator ... 189 Passenger Compartment Air Filter ... 184 Passenger Position, Safety Belts ...
Page 509 Rear Storage Area ... 123 Rearview Mirror, Automatic Dimming with ® OnStar ... 104 Reclining Seatbacks, Power ... 11 Recommended Fluids and Lubricants ... 473 Recreational Vehicle Towing ... 359 Replacement, Windshield ... 412 Reporting Safety Defects Canadian Government ... 496 General Motors ...
Page 510 Service ... 363 Accessories and Modiﬁcations ... 363 Adding Equipment to the Outside of Your Vehicle ... 365 California Proposition 65 Warning ... 364 Doing Your Own Work ... 364 Engine Soon Light ... 196 Publications Ordering Information ... 497 Servicing Your Airbag-Equipped Vehicle ...
Page 511 Tires (cont.) Cleaning ... 449 Different Size ... 430 If a Tire Goes Flat ... 440 Inﬂation - Tire Pressure ... 422 Inspection and Rotation ... 426 Lifting Your Vehicle ... 435 Pressure Monitor System ... 423 Run-Flat ... 420 Tire Sidewall Labeling ...
Page 512 Vehicle Data Collection and Event Data Recorders ... 491 Vehicle Identiﬁcation Number (VIN) ... 451 Service Parts Identiﬁcation Label ... 451 Vehicle Personalization DIC ... 220 Vehicle Positioning ... 282 Ventilation Adjustment ... 184 Visors ... 84 Voice Recognition ... 312 Voltmeter Gage ...

This manual is also suitable for:

2007 xlr-v