ABB eVD4 Installation And Service Instructions Manual page 23

5.3.7.14. Navigation
The arrow buttons are used for browsing. To scroll through the information presented in the menus, simply press the various
arrow buttons or keep them pressed.
Name
Escape
Confirm
Up
Down
Left
Right
Key
5.3.7.15 Controls
Name
Menu
R/L
Cancel
Alarm pages
SLD
Function
– Abandon the configuration mode without saving the values
– Cancel certain actions
– Adjust the display contrast in combination with the buttons
– Change the language in combination with
– Start the test on the display in combination with
– Cancel a character when editing a string in combination with
– Insert a space when editing a string in combination with
– Insert parameters in setting mode
– Confirm a new configured value
– Move up and down inside the menu
– Change the value of a figure when configuring a new value of a parameter
– Move left and right in the menu
– Change the figure being configured
– Activate the Logging-in procedure, when the user is not authenticated
– Logging-out
Function
– Access the main menu directly during display of another menu
– Display the default screen of the main menu
Change the RBF615 control mode (remote or local)
– When the R LED is on, remote control is enabled and local control is disabled
– When the LED L is on, local control is enabled and remote control is disabled
– When no LED is on, both the controls are enabled
– Activates the Clear/Reset screen
– Cancel indications and LEDs. When the Clear button is kept pressed, the first three seconds cause cancellation of the
indications, the following three seconds cause cancellation of the alarm LED. It requires a user with appropriate rights
– Allows scrolling of the various pages giving indications about the alarm LEDs
– Activates the single-line diagram on the left-hand side of the display
or
21 21