Product Description And Intended Use; Safety Instructions - FIAM. RIALTO Product Information

RIALTO Coffee Table
EN
Art. 0190/T-0192/T-0194/T-0193-0192/X-0194/X-0168/T-0160/T-0993-0995-0992-0994
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.
1

Product description and intended use

1.1) Product description and composition
The RIALTO Coffee Table Art. Code 0190/T-0192/T-0194/T-0193-0192/X-0194/X-0168/T-0160/T-0993-0995-0992-0994 is intended
as an item of indoor furniture. It is manufactured from curved, annealed float plate glass. The RIALTO Coffee Table was produced at the
FIAM ITALIA SPA factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it.
1.2) Intended use
The article known as RIALTO is designed and built to serve as an indoor Coffee Table and must therefore be used only for this
purpose and no other.
For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".
2

Safety instructions

To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
2.1) Transporting and storing the RIALTO Coffee Table in the original packaging
The RIALTO Coffee Table, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking.
It must be stored indoors in a dry place.
Place the RIALTO Coffee Table in the original packaging, in the horizontal position. The arrows on the label on the packaging must
be vertical and pointing upward.
Never place weights or loads in excess of 100 Kg (art. 0190/T), 120 Kg (art. 0192/T, 0194/T, 0160/T and 0168/T) or 200 Kg
(0193, 0993, 0995, 0992, 0994) on the original packaging since exceeding this weight may cause the breakage of the article.
The RIALTO Coffee Table in the original packaging weighs about 34 Kg (art. 0190/T), about 44 Kg (art. 0192/T and 0192/X), about
52 Kg (art. 0194/T and 0194/X), about 54 Kg (art. 0193), about 50 Kg (art. 0160/T), about 60 Kg (art. 0168/T), about 56 Kg (art.
0993 and 0995) or about 48 Kg (art. 0992 and 0994). It must therefore be placed on surfaces capable of supporting its weight.
2.2) Removing the packaging - assembly
To remove the original packaging of the RIALTO Coffee Table, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not strike the RIALTO Coffee Table with hammers or pointed
items which may crack or shatter the glass.
c) Remove the RIALTO Coffee Table from its packaging. At least two people are required for this operation. Wear gloves which
assure a good grip on the float glass.