Product Description And Intended Use; Safety Instructions - FIAM. THEO fix TH130 Product Information

THEO Table
EN
Art. TH130 - TH200 - TH240 - TH146
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.

Product description and intended use

1
• Product description and composition
The THEO Table - Art. Code TH130 - TH200 - TH240 - TH146 is a Table intended as an item of indoor furniture. It is manufactured
from float plate glass. The THEO Table was produced at the FIAM ITALIA S.r.l. factory at Via Ancona 1/B, 61010 Tavullia (PU), Italy
- Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it
• Intended use
The article known as THEO is designed and built to serve as a Table for indoor use and must therefore be used only for this
purpose and no other.
For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

Safety instructions

2
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
• Transporting and storing the THEO Table in the original packaging
The THEO Table, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking. It must
be stored indoors in a dry place.
Place the THEO Table in the original packaging, in the horizontal position. The arrows on the label on the packaging must be
vertical and pointing upward.
The THEO Table in the original packaging weighs 211 kg ( tot. 4 packages )
It must therefore be placed on surfaces capable of supporting its weight.
• Removing the packaging - assembly
To remove the original packaging of the THEO Table, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may
damage the THEO Table.
10/20