Getting Started; Step 1. Attach Stand Or Mount - Toshiba fire tv 43C350KU Quick Setup Manual

Getting started

Step 1. Attach stand or mount

Before you start using your TV, attach your TV stand or mount it on the wall.
CAUTION:
• Disconnect the AC power cord before installing a stand or a wall mount bracket.
• The display on your TV is fragile. Make sure the TV screen is not scratched or
damaged by hard objects or from pressure.
• After the installation is complete, make sure the TV is steady on a table or firmly
attached to a wall mount, before removing all protective film, if any.
Attach the TV stand
To attach the TV stand legs to your TV:
1. Carefully place your TV face down on a clean, soft, flat surface.
2. Insert the TV Base Stand into the bottom slots on your TV.
3. Use the screws provided to secure each stand tightly.
Base Stand Screws: M4×16 (43")
M4×12 (50"/55")
4