Channel Settings - Sony XEL-1 Operating Instructions Manual

Channel Settings

Cable
Auto Program
Add Digital Channels Select to add digital channels. Be sure to have the Cable option selected appropriately for
Show/Hide Channels
Edit Channel Labels
On For receiving cable channels via cable TV provider.
Off For using an antenna.
~
• You should run Auto Program after changing the Cable setting.
Automatically sets up the channel list on the TV for all receivable channels. Channel
scanning will be based on the Cable On/Off setting.
1
Select Auto Program.
2
Select OK to start Auto Program. When Auto Program is completed, the screen
will display the number of channels found.
3
Press RETURN to exit the Auto Program.
~
• Running Auto Program will clear Favorites list.
• If you run Auto Program again, previously scanned channels will be overwritten with
the newly scanned channels.
the signal source. (Useful for antenna installations.)
Allows you to show or hide channels when you surf with the CH +/– button or in the TV
channel list on the XMB
™
1
Press V/v to scroll through the channels until you highlight the channel to show or
hide.
2
Press to select Shown or Hidden.
To show or hide more channels, repeat steps 1-2.
~
• Hidden channels can be accessed by entering the channel number with 0-9 buttons on
the remote control.
Assigns labels (such as station call letters) to channel numbers.
1
Press V/v to scroll through the channel numbers. Then press
number to assign a label.
2
Press V/v to scroll through the label characters (A-Z, 0-9, etc.). Press b to move to
the next character. Repeat to add up to 7 characters to the label. Press
To assign labels to more channels, repeat steps 1-2.
.
to select the channel
to set it.
37