Connecting The Tv; Cable System Or Vhf/Uhf Antenna System; Cable System And Vhf/Uhf Antenna System; Hd Cable Box/Hd Satellite Box - Sony XEL-1 Operating Instructions Manual

2. Connecting the TV

Cable System or VHF/UHF Antenna
System
You can enjoy high-definition and standard-
definition digital programming (if available in
your area) along with standard-definition analog
programming.
~
• This TV is capable of receiving unscrambled digital
programming for both cable (QAM and 8VSB) and
external VHF/UHF antenna (ATSC).
• It is strongly recommended that you connect the
antenna/cable input using a 75-ohm coaxial cable to
receive optimum picture quality. A 300-ohm twin lead
cable can be easily affected by radio frequency
interference, resulting in signal degradation.
Cable or VHF/UHF (or VHF only)
75-ohm coaxial
cable
Cable System and VHF/UHF Antenna
System
Use an optional A-B RF switch (not supplied) to
switch between the cable and over-the-air antenna
programming, as indicated below.
A-B RF switch
A
Cable
B
Antenna
~
• Be sure to set the Cable setting to On or Off in the
Channel settings for the type of input signal you
choose (see page 37).
Rear of TV
VHF/UHF/CABLE input
Rear of TV
VHF/UHF/CABLE input

HD Cable Box/HD Satellite Box

You can also enjoy high-definition programming
by subscribing to a high-definition cable service or
a high-definition satellite service. Make sure you
connect this equipment to your TV via the HDMI
input on the back of your TV.
Shown with HDMI Connection
Rear of TV
1 IN 2 IN
HDMI cable
HD cable box/
HD satellite box
VHF/
UHF/
CABLE
x DC IN 16V
DMe /SERVICE STD/DUO
CATV/
Satellite
antenna
cable
15