2. Turn the vertical aiming screw until the level bubble
is lined up with zero.
B. Vertical Aiming Screw
D. Level Bubble
Front Turn Signal Lamps
1. The turn signal lamps are located on the outboard
side of the headlamps. To access, remove the
headlamp, (see Steps 1, 2 and 3 under "Headlamps").
2. Press the bulb socket tab and turn the bulb socket
counterclockwise to unlock the socket from the
lamp housing.
3. To remove the bulb, grasp the socket firmly and pull
the bulb out. Install the new bulb and reverse the
steps to replace.
yellowblue
6-39