Cadillac 1998 Seville Owner's Manual page 187

Table of Contents

Advertisement

If an error occurs while trying to play a cassette tape, it
could be that:
0
The cassette tape is tight and the cassette player
cannot turn the hubs of the tape. Hold the cassette
tape with the open end down and
try
turning the right
hub to the left with a pencil. Flip the tape over and
repeat. If the hubs do not turn easily, your cassette
tape may be damaged and should not be used
in the
player. Try a new tape to be sure your player
is
working properly.
0
The cassette tape is broken. (Check to see if your
tape is broken. Try a new tape.)
RW
Press the left arrow to rewind the tape rapidly. The
your station pushbuttons to tune to another radio station
while in RW mode. Press the left arrow again to return
to playing speed.
FF:
Press the right arrow to fast forward to another part
of the tape. The radio will play while the tape advances.
You may use your station pushbuttons to tune to another
radio station while in FF mode. Press the right arrow
again to return to playing speed.
radio will play while the tape rewinds. You may use
TUNE-SEEK: When this button is pressed, it has two
positions.
This
button works the same, whether it is
pressed to the first or second position. Press this button
to seek to the next or previous selection on the tape.
Your tape must have at least three seconds of silence
between each selection for TUNE-SEEK to work. The
sound will mute while seeking.
SCAN: Press this button to listen to selections for a few
seconds. The tape will go to a selection, stop for a few
seconds, then go on to the next selection. Press this
button again to stop scanning.
SIDE: Press this button to change the side of the tape
that is playing.
A
EJECT: Press the upward triangle button to
remove a tape. The radio will play. Eject may be
activated with the radio off and/or the ignition off.
CLEAN TAPE: If this message appears on the display,
the cassette tape player needs to be cleaned. It will still
play tapes, but you should clean it as soon as possible to
prevent damage to the tapes and player. See "Care
of
Your Cassette Tape Player" in the Index. After you clean
the player, press and hold the eject button
for three
seconds to reset the CLEAN TAPE indicator.
3-36

Advertisement

Table of Contents
loading

Table of Contents