S-TEC Fifty Five X Pilot Operating Handbook page 25

S–TEC
Table 2-2. Pre-Flight Test (continued from page 2-7)
ACTION
9. Attempt movement of A/C Control
Sidestick forward and aft (A/C with
Pitch Servo Only).
10. Set PFD VSI Bug to 0 FPM.
11. Press VS mode selector switch
to engage vertical speed mode.
12. Set PFD VSI Bug to 500 FPM
climbing.
13. Set PFD VSI Bug to 500 FPM
descending.
14. Set PFD VSI Bug to 0 FPM.
15. Move A/C Control Sidestick as
far aft as possible (A/C with Pitch
Servo Only).
16. Move A/C Control Sidestick as
far forward as possible (A/C with
Pitch Servo Only).
17. Move A/C Control Sidestick aft
until TRIM
extinguished (A/C with Pitch Servo
Only).
2-10
∧
annunciation
RESPONSE
A/C Control
freedom of movement indicates that
Pitch Servo is engaged.
Pitch Servo can be overridden. If not,
disconnect autopilot and do not use.
VS annunciation appears with HDG
on AP display, as shown in Fig. 2-12.
VS annunciation appears with HDG
on PFD display, and VSI bug is
magenta as shown in Fig. 2-13.
A/C Control Sidestick moves in aft
direction.
A/C Control Sidestick moves in
forward direction.
A/C Control Sidestick stops.
After 3
annunciation appears on AP display.
After 7
annunciation flashes.
After 3
annunciation appears on AP display.
After 7
annunciation flashes.
is
Sidestick's reduced
------
seconds, TRIM
seconds, TRIM
seconds, TRIM
seconds, TRIM
------
2nd Ed. Nov 15, 07
∨
∨
∧
∧