Advertisement
Lock release
To release the trunk lock feature,
open the glove box with master key
and set the trunk lid control button to
ON position (depressed).
In this
position the trunk will open with trunk
lid release lever or transmitter. The
trunk can never be opened with the
sub key.
With e-key (if equipped)
Trunk locking
To activate the trunk lock system so
that the trunk can only be opened
with the mechanical key, perform the
following:
1. Open the glove box.
2. Set the trunk lid control button to
OFF position (not depressed).
3. Close and lock the glove box using
the mechanical key.
When leaving your keys with a park-
ing lot attendant or valet, perform
steps 1 to 3 above, remove the
mechanical key from the e-key and
leave the e-key with the attendant. In
this manner the e-key can only be
used to start the engine and operate
door locks.
Knowing your vehicle
Lock release
To release the trunk lock feature,
open the glove box with mechanical
key and set the trunk lid control but-
ton to ON position (depressed). In
this position the trunk will open with
trunk lid release lever or e-key.
3 83
Advertisement
