Advertisement
DRIVER POSITION MEMORY SYSTEM (IF EQUIPPED)
STOP
STOP
OGH036901N
A driver position memory system is
provided to store and recall the seat,
steering wheel and outside mirror
positions with a simple button opera-
tion. By saving the desired positions
into the system memory, different
drivers can reposition the seat, steer-
ing wheel and outside mirror based
upon their driving preference.
If battery is disconnected, the posi-
tion memory will be lost and the driv-
ing positions should be restored in
the system.
Storing positions into memory
using the buttons on the door
Storing driver's seat positions
1. Shift the transaxle lever into P
while the ignition switch is ON.
2. Adjust the seat, steering wheel
and outside rearview mirror to
positions comfortable for the driv-
er.
3. Press M button on the control
panel.
4. Press one of the memory buttons
(1 or 2) within 5 seconds after
pressing the M button. The sys-
tem will beep twice when memory
has been successfully stored.
The particular driver positions are
memorized in the button (1 or 2)
selected.
Knowing your vehicle
Recalling positions from memory
1. Shift the transaxle lever into P
while the ignition switch is ON.
2. To recall the position in memory,
press the desired memory button
(1 or 2) the system will beep once,
then seat, steering wheel and out-
side rearview mirror will automati-
cally adjust to the stored positions.
Adjusting one of the control knobs for
the seat, outside rearview mirror or
steering wheel while the system is
recalling the stored positions will
cause the movement for that compo-
nent to stop and move in the direc-
tion that the control knob is moved.
Other components will continue posi-
tion recalling.
To stop the position recall at any
point in the recall process, press the
STOP button once. Seat, steering
wheel and outside rearview mirror
position recalling will stop.
3 35
Advertisement
