Page 1
7X40W LED BEAM WASH MOVING HEAD -Maintenance 1.Please keep the light in dryness and avoiding use in wet place. 2.Using intermittenlly can be extended the life. 3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better.
Page 2
5.After power off,if it is need used again,please cool down over 20 minuter. 6.Please look round the manual for ensure the product can be used normally. -Display Control Instruction Welcome to use our light.The light uses energy-saving LED,long Product life,shockproof,dustproof, DMX receiver and self-running feature, which can produce a variety of vivid lighting effects,easy to operate, suitable for all types of entertainment decoration,architectural lighting industry.
Page 3
Display Control Instruction 1. Add (DMX512 address setting page menu) DMX address this option is used to set the DMX communication address. Press the "up" key to increase the address number, and the "down" key to decrease the address number. After selecting the address, press "enter"...
Page 4
"enter" to save and exit. Screen saver this option is the LCD backlight long light switch. Press "enter" to enter the setting, press "up" or "down" to select the LCD backlight status. Select "on" to indicate that the LCD backlight is off 15 seconds after the LCD screen protection takes effect, select "off"...
Page 5
DMX Channel Summary-15 Channels Mode Channel Function Value Function Pan 0-540° 0-255 P fine 0-255 Pan Fine tuning 16bit Tilt 0-270° Tilt 0-255 T fine 0-255 Tilt Fine tuning 16bit P/T Speed 0-255 Pan Tilt Speed Zoom 0-255 Light spot from large to small Total dimming 0-255 Gobo&Wash LED dimming...
Need help?
Do you have a question about the 7X40W and is the answer not in the manual?
Questions and answers