Shehds LED Beam User Manual

7x12w rgbw moving head lighting

Download this manual

LED Beam 7x12W RGBW Moving Head Lighting

Maintenance

1.Please keep the light in dryness and avoiding use in wet place.

2.Using intermittenlly can be extended the life.

3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects

better.

4.Please do not wipe the crust using organic menstruum for avoid to damaged the product.

Statement

The product has well capability and intact packing when leave factory,All of the user should comply with

above warning item and manual ,any misuse cause of the damages are not included in our

guarantee,and also can't be responsible for any malfunction & problem owing to ignore the manual.

Please forgive that we will not be notice for technical change

Attention Item

1.For guarantee the life of product,please do not put it on the wet place and not use it the place over 40

degree.

2.Please don't lay the product on the un-fixable or shakable place.

3.Ask for the professional to maintain the product in order to avoid the danger of get an electric shock.

Need help?

Do you have a question about the LED Beam and is the answer not in the manual?

Page 1 LED Beam 7x12W RGBW Moving Head Lighting Maintenance 1.Please keep the light in dryness and avoiding use in wet place. 2.Using intermittenlly can be extended the life. 3.Attention to clean the fan and lens usually in order to get the ventilating effects and lighting effects better.
Page 2 4.Power supply should not be changed over +&-10% while the light is using,it will be decreased the life of lamp if the power is too high,but it will be influenced the luminosity if the power is too low. 5.After power off,if it is need used again,please cool down over 20 minuter. 6.Please look round the manual for ensure the product can be used normally.
Page 3 DMX Address DMX Address press the up and down keys to ADJ-R(0-255) adjust red light brightness Disp (0-255),press the enter to confirm press the up and down keys to ADJ-G(0-255) adjust green light brightness (0-255),press the enter to confirm Cont press the up and down keys to ADJ-B(0-255) adjust blue light brightness...
Page 4 Instructions:Press the function key A cycled out the eight different function effects,digital tube first two digits on behalf of which the current function(see menu).The last two digits represent the functions in which the address code or speed parameters.Press the B or C key to modify the parameter values.Press the D key to confirm.