Advertisement
leave it. After you've moved the shift lever into the "P" (Park) position,
hold the regular brake pedal down. Then, see if you can move the shift
lever away from "P" (Park) without first pulling it toward you (or, if you
have the console shift lever, without first pushing the button). If you can,
it means that the shift lever wasn't fully locked into "P7' (Park).
SHIFTING OUT OF
"P"
(PARK)
Your Cadillac has a brake-transaxle shift interlock. You have to fully
apply your regular brake before you can shift from "P" (Park) when the
ignition is in the "Run" position. See "Automatic Transaxle" in the Index.
If you cannot shift out of "P'7 (Park), ease pressure on the shift lever --
push the shift lever all the way into "P" (Park) and also release the shift
lever button on floor shift models as you maintain brake application.
Then move the shift lever into the gear you want. (Press the shift lever
button before moving the shift lever.) If you ever hold the brake pedal
down but still can't shift out of "P" (Park), try this:
1. Turn the key to "Off." Open and close the driver's door to turn off the
2. Apply and hold the brake until the end of Step 4.
3. Shift to "N" (Neutral).
Retained Accessory Power feature.
4.
Start the vehicle and then shift to the drive gear you want.
5. Have the vehicle fixed as soon as you can.
Torque Lock (Automatic Transaxle)
If you are parking on a hill and you don't shift your transaxle into "P"
(Park) properly, the weight of the vehicle may put too much force on the
parking pawl in the transaxle. You may find it difficult to pull the shift
lever out of "P" (Park). This is called "torque lock." To prevent torque
lock, always
be
sure to shift into "P" (Park) properly before you leave
the
driver's seat. To find out how, see "Shifting Into 'P' (Park)" in the Index.
If "torque lock" does occur, you may need to have another vehicle push
yours a little uphill to take some of the pressure from the transaxle, so
you can pull the shift lever out of "P" (Park).
97
Advertisement
