Download Print this page

Lil' Jumbl LJBSCT User Manual page 5

Bedside sleeper with canopy and music

Advertisement

How to attach Mobile:
1.
Insert end of Mobile Arm into Music Box Base.
2. Place Music Box Base onto back rail of Sleeping Nest and push until it clicks into place.
3. Attach Toys to the end of the Mobile Arm that is not inserted into Music Box Base.
How to position Canopy:
1.
Unfold Canopy.
2. Position over top of Sleeping Nest until secured.
Using Your Bedside Sleeper
Adjusting the height:
IMPORTANT: Never adjust height while your baby is in the bedside sleeper. Always make sure the indicator
numbers on left and right sides are the same. The Sleeping Nest must be kept level. Failure to do so could result
in serious injury or death.
1.
To raise, step on the center of the Foot Stabilizer Bar to
stabilize the bedside sleeper, while holding both sides
of the Sleeping Nest Rail and pulling the Sleeping Nest
up to the desired height.
2. To lower, locate the plastic handles on the Left and
Right Tube Feet. Pull both handles up simultaneously
to release the locks, then push Sleeping Nest down
to the desired height.
3. Check to make sure the indicator numbers on the left
and right sides are the same.
How to raise and lower the front of the Sleeping Nest:
1.
Unzip the left and right sides of the front of the Sleeping Nest as shown.
2. There are plastic release buttons on either side, which will be covered by the Sleeping Nest's fabric cover.
3. Push these buttons to release the front rail of the Sleeping Nest.
4. Push the front of the Sleeping Nest down as shown.
Lift bracket
5

Advertisement

loading