Advertisement
How to assemble Base:
1.
Connect Left Foot Tube and Right Foot Tube to Foot Stabilizer Bar as shown.
2. Push down on the spring pin located on the Left Foot Tube.
3. Push the Foot Stabilizer Bar over the spring pin until it locks.
4. Repeat Steps 1 and 2 to connect the Right Foot Tube.
How to assemble Sleeping Nest:
1.
Place plastic ends of Sleeping Nest into top of Left and Right Foot Tubes until the spring pins are locked.
2. Align the Sleeping Nest Support Bar with the Left and Right Foot Tubes, then push the Sleeping Nest
Support Bar over the spring pins until locked.
Sleeping nest quick release button
Sleeping nest fixed plastic
4
Spring pin
Advertisement
