Getting Started; Insert A Memory Card; Charge The Battery - Prestigio SMARTKIDS UP User Manual

SmartKids UP

3. Getting started

For more information
www.prestigio.com/tablets.
For more information about your device, visit the website www.prestigio.com/support.
Do not cover the antenna area with your hands or other objects. This may cause connectivity
problems or drain the battery.
Please read the "Important Safety Instructions" before use.

3.1 Insert a memory card

1. Insert the memory card into the slot with the correct side.
2. Press down until it clicks.
WARNING!
• Some memory cards may not be fully compatible with the device. Using an incompatible card
may damage the device or the memory card, or corrupt the data stored in it.
• Frequent writing and erasing of data shortens the lifespan of memory cards.

3.2 Charge the battery

A new battery is partially charged.
The battery level icon is located in the upper-right corner of the tablet screen.
1. Plug one end of the USB cable into the USB-C port of the device, and the other into the
charger.
2. After being fully charged, disconnect the device from the charger. First unplug the charger
from the device, and then unplug it from the electric socket.
WARNING!
• Always use authentic accessories to optimise your battery performance. Non-authentic
accessories can damage your battery and even your tablet.
• Here are some tips to help you optimise your battery performance:
- always ensure that your tablet profile is appropriately set to meet your actual usage.
- if you are not using Bluetooth, Wi-Fi or other applications, turn them off.
©2021 Prestigio
about Prestigio products, please visit the website
5