Set Up A New Thor; Hardware Setup; Software Setup - LXE Thor CE User Manual

Note: LXE recommends that installation or removal of accessories be performed on a clean, well-lit surface. When
necessary, protect the work surface, the Thor, and components from electrostatic discharge.
While the Thor is in a Hazardous Location DO NOT:
Connect an external power source to the Thor.
l
Connect a USB device or audio jack to the Thor.
l

Hardware Setup

1. Connect accessories to the
2. Connect cables.
3. Connect power cable to the Thor Quick Mount.
4. Secure all cables to the Thor Quick Mount with the Strain Relief Cable Clamps.
5. Secure the Thor in the Quick Mount.
6. Press power switch on Quick Mount.
7. Press the Power key.

Software Setup

Prerequisite: Hardware setup is complete.
1. Calibrate Touch screen
2. Set Date and Time Zone
3. Set Power Schemes Timers
4. Adjust Speaker Volume
5. Pair Bluetooth devices
6. Setup Wireless client parameters
7. Setup terminal emulation
8. Save changed settings to the registry
9. Setup the LXE AppLock parameters
10. Set the LXE DC Wedge parameters

Set Up A New Thor

Thor Quick Mount.
parameters
E-EQ-THORCEOGWW-A [ 1 ] Thor CE User Guide