Backlights and Indicators
Set Power Scheme Timers
Start | Settings | Control Panel | Power | Schemes
Change the parameter values and tap OK to save the
changes.
Battery Power Scheme
Use this option to configure the Thor behavior when powered
by the UPS battery.
Switch state to
User
Default is After 3
1
Idle
seconds
Switch state to
Default is After 15
2
System Idle
seconds
Switch state to
Default is After 5
3
Suspend
minutes
AC Power Scheme
Use this option when the Thor will be running on external
power (e.g. connected to).
Switch state to User
Default is After 2
Idle
minutes
Switch state to
Default is After 2
System Idle
minutes
Switch state to
Default is After 5
Suspend
minutes
The timers are cumulative. The System Idle timer begins the
countdown after the User Idle timer has expired and the
Suspend timer begins the countdown after the System Idle
1
An amount of time has passed, set by the User Idle timer,
and the device shuts down a minimum number of services
e.g. backlights. The System Idle timer and the Suspend timer
have not expired yet.
2
An amount of time has passed, set by the System Idle
timer, and the device shuts down a few more services e.g.
display. The User Idle timer has expired and the Suspend
timer has not expired yet.
3
Suspend mode is entered when (1) the unit is inactive for a
predetermined period of time, (2) the user taps the Power
key, or (3) Start | Suspend is chosen. Inactivity means that
internal devices that reset the power state are not active.
E-EQ-THORCEOGWW-A [ 8 ] Thor CE User Guide
timer has expired. When the User Idle timer is set to "Never",
the power scheme timers never place the Thor in User Idle,
System Idle or Suspend modes (even when the Thor is idle).