Table of Contents
Advertisement
268
4-5. Using the driving support systems
cators
BSM function: When a vehicle is
detected in a blind spot of the out-
side rear view mirrors or approach-
ing rapidly from behind into a blind
spot, the outside rear view mirror
indicator on the detected side will
illuminate. If the turn signal lever is
operated toward the detected side,
the outside rear view mirror indica-
tor will flash.
RCTA function: When a vehicle
approaching from the right or left at
the rear of the vehicle is detected,
both outside rear view mirror indi-
cators will flash.
Monitor screen display
C
(RCTA function only)
If a vehicle approaching from the
right or left at the rear of the vehicle
is detected, the RCTA icon
(P.273) for the detected side will
be displayed.
RCTA buzzer (RCTA func-
D
tion only)
If a vehicle approaching from the
right or left at the rear of the vehicle
is detected, a buzzer will sound
from behind the rear seat.
Turning the BSM func-
tion/RCTA function on/off
The BSM function and the
RCTA function can be
enabled/disabled on the
screen of the multi-information
display. (P.100, 111)
When the Blind Spot Monitor is dis-
abled, the BSM OFF indicator illu-
minates. (P.85)
When the RCTA function is dis-
abled, the RCTA OFF indicator illu-
minates. (P.85)
The BSM function and the RCTA
function are automatically enabled
each time the power switch is
turned to ON.
■
Outside rear view mirror indica-
tors visibility
In strong sunlight, the outside rear
view mirror indicator may be difficult
to see.
■
Hearing the RCTA buzzer
The RCTA buzzer may be difficult to
hear over loud noises such as high
audio volume.
■
When "Blind Spot Monitor
Unavailable See Owner's Man-
ual" or "Rear Cross Traffic Alert
Unavailable See Owner's Man-
ual" is shown on the multi-
information display
The sensor voltage has become
abnormal, or water, snow, mud,
etc., may be built up in the vicinity of
the sensor area of the rear bumper.
(P.270)
Removing the water, snow, mud,
etc., from the vicinity of the sensor
area should return it to normal.
Also, the sensor may not function
normally when used in extremely
hot or cold weather.
■
When "Blind Spot Monitor Mal-
function Visit Your Dealer" or
"Rear Cross Traffic Alert Mal-
function Visit Your Dealer" is
shown on the multi-information
display
There may be a sensor malfunction
or misaligned. Have the vehicle
inspected at a Toyota dealer.
■
Customization
Some functions can be customized.
(P.100, 111)
Advertisement
Table of Contents
