Table of Contents
Advertisement
(Suspend to RAM) sleep state. Settings: Enabled and Disabled.
Mouse Wakeup From S3
This item allows the activity of the mouse to wake up the system from S3
(Suspend to RAM) sleep state. Settings: Enabled and Disabled.
Keyboard Wakeup From S3
This item allows the activity of the keyboard to wake up the system from S3
(Suspend to RAM) sleep state. Settings: Enabled and Disabled.
Specific Key for Wakeup
This setting allows users to set a specific key for the Keyboard Wakeup
From S3 function.
Power Management/APM
Setting to Enabled will activate an Advanced Power Management (APM)
device to enhance Max Saving mode and stop CPU internal clock. Settings are
Disabled and Enabled.
Power/Sleep LED
This item configures how the system uses power LED on the case to indicate
the sleep state. Available options are:
Single LED The power LED blinks to indicate the sleep state without
changing its color.
Dual LED
The power LED changes its color to indicate the sleep
state.
Suspend Time Out (Minute)
After the selected period of system inactivity, all devices except the CPU shut
off. Settings are Disabled, 1, 2, 4, 8, 10, 20, 30, 40, 50, and 60.
FDC/LPT/COM Ports, Primary/Secondary Master/Slave IDE
These items specify if the BIOS will monitor the activity of the specified hard-
ware peripheral or component. If set to Monitor, any activity detected on the
specified hardware peripheral or component will wake up the system or pre-
vent the system from entering the power saving modes. Settings: Monitor and
Ignore.
3-15
BIOS Setup
Hide quick links:
Advertisement
Table of Contents
