Eicon Technology DIVA ISDN+CT Installation Manual page 11

(B) Install the WAN-Miniport driver
In the displayed message box, click 'Yes' to install the WAN-Miniport Driver.
1.
Installing the WAN-Miniport driver allows you to use Dial-Up Networking
over ISDN.
In the 'Eicon WAN-Miniport Driver Setup' dialog box, keep the default
2.
settings, then click 'OK'.
(C) Install and configure Remote Access Service (RAS)
In the displayed message box, click 'Yes' to install RAS (if it is not already
1.
installed) and configure RAS.
Note: If you install RAS, you also have to re-install your Windows NT Service
Pack.
If the 'Eicon WAN-Miniport Driver Setup' dialog box appears: Insert your
2.
Windows NT CD-ROM or Setup diskette into the appropriate drive. In the
'Eicon WAN-Miniport Driver Setup' dialog box, do the following:
Click 'Continue'.
If the 'Remote Access Setup' dialog box appears: In the 'Remote Access
3.
Setup' dialog box, do the following:
Step 4: Install the DIVA ISDN+CT Software N 11
Type D:\I386
(where D is the drive that
contains the
Windows NT CD-ROM or
Setup diskette).
Click 'Add'.