Install The Diva Isdn+Ct Software - Eicon Technology DIVA ISDN+CT Installation Manual

If a required protocol does not appear in the 'Network Protocols' list, you
3.
must add it. To add a protocol:
• Click 'Add'.
• In the 'Select Network Protocol' dialog box, select the required protocol,
then click 'OK'.
• Follow the on-screen instructions.
• In the 'Network' dialog box, click 'Close'. If prompted, restart your
computer.

Install the DIVA ISDN+CT software

(A) Install your DIVA ISDN+CT as a network adapter
At the Windows NT console, logon as Administrator or equivalent.
1.
Create a new folder on your hard-disk drive.
2.
Copy the DIVA ISDN+CT software into the folder you created. Note that you
3.
can download the DIVA ISDN+CT software from the Eicon Technology Web
site at: http://www.eicon.de/download/PUBLIC/dindex.htm
Extract the software as described in the instructions that were provided to you
4.
with the software, or follow the instructions on the Eicon Technology Web
site.
From Windows Explorer, navigate to the folder you created in step
5.
double-click the 'setup.bat' file. This starts the DIVA ISDN+CT software
installation.
The 'Windows NT Setup' screen appears. In the 'Select OEM Option' dialog
6.
box, select 'DIVA ISDN+CT (PCI)', then click 'OK'.
If your computer has more than one bus type (for example, ISA and PCI), the
7.
'Passive ISDN S0 Adapter Bus Location' dialog box appears.
• In 'Type', select PCI.
• In 'Number', keep the default setting.
Click 'OK'.
The 'Eicon DIVA ISDN+CT Adapter Setup' dialog box appears. Select the
8.
switch type specified by your ISDN service provider from 'ISDN Protocol
(Switch Type)'.
In Europe, select 'Europe, other countries, Euro-ISDN (ETSI-DSS1)'
(commonly referred to as ETSI standard).
Click 'OK'.
10 N Step 4: Install the DIVA ISDN+CT Software
. Then,
2