Table of Contents
Advertisement
Safety Summary
The following general safety precautions must be observed during all phases of operation, service, and repair of this unit. Failure to comply with these precautions or with specific warnings elsewhere in these instructions violates
manufacturer safety standards and intended use of this unit. Harman Luxury Audio Group assumes no liability for failure to comply with these requirements.
DO NOT OPERATE IN AN EXPLOSIVE ATMOSPHERE
Do not operate the unit in the presence of flammable gasses or fumes. Operation of any electrical instrument in such an environment constitutes a definite safety hazard.
KEEP AWAY FROM LIVE CIRCUITS
Operating personnel must not remove unit covers. Qualified maintenance personnel must make component replacements and internal adjustments. To avoid personal injuries, always disconnect power and discharge circuits before
touching them.
DO NOT SERVICE OR ADJUST ALONE
Do not attempt internal service or adjustment unless another person capable of rendering first-aid resuscitation is present.
DO NOT SUBSTITUTE PARTS OR MODIFY INSTRUMENT
Because of the danger of introducing additional hazards, do not install substitute parts or perform any unauthorized modification to the unit.
DANGEROUS PROCEDURE WARNINGS
Warnings such as the example shown below precede potentially dangerous procedures throughout this document. Instructions contained in warnings must be followed.
WARNING
Dangerous voltages capable of causing death are present in this unit. Use extreme caution when handling, testing, or adjusting.
EN-4
Advertisement
Table of Contents
