Roland VS-880EX Quick Start Manual page 50

Appendices
6
If "Init.Drive=NoDrv" appears in the display
This message indicates that the drive is not recognized properly. Turn off the power
with the POWER switch on the rear panel once, make sure the hard disk is reinstalled
properly.
50
Follow the procedure described in "Turning On the Power" (p. 4),
confirm that the VS-880EX start up properly.
When you need to transport the unit, package it in the box (including
NOTE
padding) that it came in, if possible. Otherwise, you will need to use
equivalent packaging materials.
If an internal IDE hard disk (HDP88 serie's) is installed, then remove
the hard disk, reversing the installation procedure described above.
Place the hard disk in its carton and set this in the specified place
inside the VS-880EX shipping carton. The unit is now ready to be
transported. Moving the VS-880EX with the hard disk installed may
result in loss of song data or damage to the hard disk.