Subscribe to Our Youtube Channel
Related Manuals for INVISICLEAN Stella
Summary of Contents for INVISICLEAN Stella
- Page 1 InvisiClean Stella Air Purifier Model: IC-2010 USE & CARE INSTRUCTIONS If you have any questions, please email us at support@invisiclean.com call us at 818-787-1188 Monday-Friday 9AM-5PM Pacific time for immediate assistance.
- Page 2 READ AND SAVE THESE INSTRUCTIONS WARNING Failure to comply with the warnings listed below may result in electric shock or serious injury. This product should be used only in accordance with the specifications outlined in this manual. Usage other than what has been specified here may result in serious injury.
- Page 3 WARNING – Skin or eye damage may result from directly viewing the light produced by the UV bulb in this apparatus. Always disconnect power before replacing the bulb or servicing. Replace bulb with InvisiClean model IC-2010- BULB CAUTION: This equipment should be inspected frequently and collected dirt removed from it regularly to prevent excessive accumulation that may result in flashover or a risk of fire.
-
Page 4: Product Diagram
PRODUCT DIAGRAM Air outlet Main unit Air inlet UV-C lamp cover (Bulb inside) HEPA Filter Base Screw cap... -
Page 5: Air Purification System
AIR PURIFICATION SYSTEM Improve your indoor air quality with your new air purifier. Multiple levels of cleaning are included with your air purifier: PRE-FILTER: Captures initial larger particles such as per hair, dust, and allergens. Please vacuum or brush off monthly for optimum performance. HEPA: Captures dust, smoke, pollen and other small particles. - Page 6 OPERATING THE AIR PURIFIER 1. “POWER/FILTER RESET” BUTTON: Touch to turn on/off the air purifier Note: Press and hold POWER Button for 5 seconds to reset Filter Reset light. 2. “TIMER” BUTTON: By pressing this button, the purifier can be timed to operate for intervals of 2, 4,and 8 hours, stopping automatically when the time has elapsed.
- Page 7 The light will turn off. *The filter will last approximately 6 - 12 months depending on environment. Please replace with only genuine InvisiClean filter model: IC-2010-FILTER 1. Unplug the unit and place it upside down. 2. Turn the screw cap counter-clockwise to remove and remove the base.
-
Page 8: Uv Bulb Replacement
UV BULB REPLACEMENT (Model: IC-2010-BULB) 1. Remove the 2 screws holding the UV bulb cover in place. Please use caution to not drop the screws inside the unit. 2. Turn the UV bulb cover counter-clockwise and unlatch it from the unit. 3. -
Page 9: Cleaning And Maintenance
CLEANING & MAINTENANCE The exterior of machine should be cleaned at least once every month using a clean, dry, soft cloth. More or less cleaning may be required depending on environmental conditions. NOTE: Do NOT stick any foreign objects or your fingers inside of the unit. •... - Page 10 Thank you for purchasing an InvisiClean product. InvisiClean is a US company with customer support in the USA. We design and test our products to higher standards and do not take shortcuts to cut costs. If you have any questions or concerns about our products please contact us directly by email at support@invisiclean.com...
Need help?
Do you have a question about the Stella and is the answer not in the manual?
Questions and answers