Redial - Ricoh FAX3900L Operating Instructions Manual

Smt4EN-Ad-F_FM.book Page 27 Friday, December 8, 2000 3:42 PM

Redial

If a message was not transmitted suc-
cessfully, that does not mean that you
have to enter the telephone number
again. With the {Pause/Redial} key,
you can redial with just a few key-
strokes.
Using the Redial Key
The machine can remember the last
10 numbers dialed on the numeric
keypad, and one previously dialed
Quick Dial/Speed Dial. If you have to
redial one of these numbers, just
press the {Pause/Redial} key until the
required telephone number or name
is displayed, and then press the
{Start} key.
This feature has the following uses.
• If the machine is waiting to redial
the other party, you do not have to
wait for the redialing interval to
expire. Press the {Pause/Redial} key
until the required telephone num-
ber or name is displayed, and then
press the {Start} key.
• If you wish to send another mes-
sage to the same address that you
sent one to recently, you do not
have to dial the full number again
if it is still in the Redial memory.
Place the message in the feeder,
and then press the {Start} key.
A
Make sure that the machine is in
standby mode.
Ready
Set Orig./ Enter No.
B
Carefully place your fax message
in the auto document feeder.
Printed Matters
100% 02:39PM
Handy Dialing Functions
C
Press the { { { { Pause/Redial} } } } key.
The 10 most recent numbers you
have dialed are displayed.
Redial:
a01 ABC COMPANY
D
Display the destination you want
to redial.
You can scroll through the destina-
tions by pressing the {Pause/Redial}
key or 0 or 1.
E
Once the name you are searching
for is displayed, press the { { { { OK} } } }
key to dial the number.
Dest.1 OK to Add
a01 ABC COMPANY
If you want to redial another desti-
nation, press the {OK} key and re-
peat the above steps from step B
F
Press the { { { { Start} } } } key.
Limitation
❒ If you specified multiple desti-
nations, they are not all stored
in memory.
❒ If you specified multiple desti-
nations using the Quick Dial or
Speed Dial keys, only the latest
destination is stored in memory.
hi/OK
3
27