9. Replace it with a new bulb.
10. Reverse Steps 1 through 8 to reinstall the taillamp
assembly.
5-58
8. Once the socket has
been removed, pull the
bulb straight out to
remove it from
the socket.
Rear Quarter Panel Turn Signal and
Stoplamps
1. Open the trunk.
2. On either side of the rear of the trunk is a plastic
retainer that holds the cargo net and taillamp
assembly in place. Unhook the cargo net from the
cargo net retainer and remove the retainer by
turning it counterclockwise.
4. Pull back the trunk trim panel.
3. Remove the plastic
retaining screws on the
trunk's interior.