Nacon GM-180 Manual page 4

EN /
I Battery installation
Remove the battery compartment cover and insert the battery provided,
making sure that they are pointing in the direction as indicated on the battery
compartment,
i.e. the – terminal on the spring end and the + terminal on the domed end. Then
close the cover.
NB: For the mouse to work properly, use the battery (3.7V) provided.
I Recharging the GM180
Using the USB charging cable, plug the micro USB connector into the micro USB
port of the mouse. Plug the other end of the cable into the USB port of a PC/
laptop.
Important: Always charge the battery in the mouse and do not use an external charger to charge the
battery directly.
I Low battery indication
When the battery level is low, the LED starts to flash to indicate that your mouse
does not have much battery charge and that it must be recharged.
Recycling
Do not dispose of this product with the household waste.
Dispose of your old electrical appliance at a suitable
collection centre. Recycling is important and helps protect the
environment by reducing waste. EU and Turkey only.