Napoleon Fuze Installation And Operation Manual page 19

Power
Orange Flame
Blue Flame
Heater
Timer
Temperature
note:
To improve operation, aim the remote control at the front of the appliance. DO NOT press the buttons too
quickly. Give the appliance time to respond to each command.
operating instructions
Turns the appliance on / off.
Shows orange flame current state when turned
on.
Controls orange flame brightness.
6 Settings:
F5 - Brightest flame
F4
F3
F2
F1
F0 - OFF
Controls blue flame brightness.
6 Settings:
F5 - Brightest flame
F4
F3
F2
F1
F0 - OFF
Turns the heater and blower on / off.
4 Settings:
H0 - Heater and blower off
BL - Blower on
H1 - Heater blows warm air (750W)
H2 - Heater blows hot air (1500W)
NOTE: Heater functions cycle from H0-BL-
H1-H2. To lock the heater and temperature
setting, press and hold the heater button for
5s. Press and hold the button again for 5s to
unlock.
Controls the timer.
10 Settings: 30 (min), 1H, 2H, 3H, 4H, 5H,
6H, 7H, 8H, and 00. Press button until desired
setting is reached.
Controls the temperature.
1. Press once to activate touch panel indicator.
2. Press again until desired setting is reached.
Digital display shows setting circles as below.
°C 18 19 20 21 22
Temperature
°F 64 66 68 70 72
NOTE: Press and hold the button for 5s to
switch the temperature from °C to °F, and vice
versa.
23 24 25 26 27 C
74 76 78 80 82 F
W415-1987 / C / 07.20.20
EN
19