INFOSEC E3 Pro RT User Manual page 27


14: reserved
Interface

15: Inverter voltage calibration
Interface

16: Floating charger voltage adjustment
Interface

17: Constant charger voltage adjustment
Interface

18: Maximum charger current setting
INFOSEC UPS SYSTEM - 4, rue de la Rigotière - 44700 Orvault - FRANCE - www.infosec-ups.com
Hot Line – Tel + 33 (0)2 40 76 15 82 - Fax + 33 (0)2 40 94 29 51 - hotline@infosec.fr – 11 17 AA 59 204 18
Parameter 2: Select "Add" or "Sub" function to
calibrate battery voltage to real figure.
Parameter 3: The voltage setting range is from
0V to 5.7V. The default value is 0V.
Setting
reserved
Setting
Parameter 2: you may choose Add or Sub to
calibrate inverter voltage
Parameter 3: The voltage setting range is from
0V to 6.4V. The default value is 0V.
Setting
Parameter 2: you may choose Add or Sub to
adjust floating charger voltage.
Parameter 3: the voltage range is from 0V to
6.4V, the default value is 0V.
Setting
Parameter 2: you may choose Add or Sub to
adjust constant charger voltage.
Parameter 3: the voltage range is from 0V to
3.2V, the default value is 0V.
27