Headlamp High/Low-Beam Changer - Buick 2002 Regal Owner's Manual

If the arrow flashes faster than normal as you signal a
turn or a lane change, a signal bulb may be burned out
and other drivers won't see your turn signal.
If a bulb is burned out, replace it to help avoid an
accident. If the arrows don't go on at all when you
signal a turn, check for burned
the fuse (see "Fuses and Circuit Breakers" in the Index).
A chime will sound if you leave your turn signal on for
more than 3/4 mile (1.2 km).

Headlamp High/Low-Beam Changer

To change your headlamps from low beams to high
beams, or high to low, pull the multifunction lever all
the way toward you. Then release it.
-
out bulbs and then check
When the high beams are
on, this indicator light
located on the instrument
panel cluster will also be on.
Flash-to-Pass Feature
This feature lets you use your high
to signal the driver in front of you that you want to pass.
It works even if your headlamps are off.
To use it, pull the turn signal lever toward you a little,
but not so far that you hear a click.
If your headlamps are off or on low beam, your
-
high beam headlamps will turn on. They'll stay
on as long as you hold the lever toward you and
-
the high beam indicator on the dash will come on.
Release the lever to return to normal operation.
-
beam headlamps
2-41