Disposal; Installation; Space Requirements - Pilous ARG 380 Plus S.A.F. Instruction Manual

Warning: Used coolants are special waste! The disconnec-
ting of the machine from supply may be carried out only
by electrically qualified persons!

1.4. Disposal

When the machine has been put out of operation once for all, it should be
disposed of in accordance with the rules in force in the respective country.
We recommend to contact a company specialized in waste disposal.

2. Installation

2.1. Space Requirements

The machine may be installed on any suitable even floor in the hall (on a
concrete surface). Observe the permissible floor load. The machine should
be aligned by the 4 bolts provided in the corners of the base.
Recommendations / conditions:
• Allow for sufficient space for feeding and removing the workpieces and
the machine maintenance - the operator's working area should be at least
1 m around the machine and 0,5 m around the roller conveyor.
• Install roller conveyors and/or a case for cut pieces for a safe handling of
workpieces and to prevent accidents due to falling cut pieces.
• Install a lift mechanism for heavy workpieces.
• Provide good workplace lighting.
ARG 400 Plus S.A.F.
3