Table of Contents
Advertisement
Available languages
Available languages
ENGLISH
Dear customer,
Thank you for buying our product. Please read through this instruction
carefully. It will help you understand the machine and operate it smoothly.
© 2007 All rights, particularly the right to make copies of, to distribute and
translate this instruction manual, are reserved. No part of this instruction
manual may be reproduced in any form (printing, microfilm or others) or
stored, processed, copied or distribured by using electronic systems wit-
hout permission of PILOUS.
Contents:
0.
In General ......................................................................................1
0.1.
Safety Provisions.............................................................................2
0.2.
Scope of Use / Use acc. to Specification ........................................2
0.3.
Requirements Concerning Operators ..............................................2
0.4.
0.5.
Protective Enclosures ......................................................................2
1.
Transport and Storage..................................................................2
1.1.
Surface Treatment ...........................................................................2
1.2.
Packing ............................................................................................2
1.3.
Dismantling/ Repackaging ..............................................................2
1.4.
Disposal...........................................................................................3
2.
Installation .....................................................................................3
2.1.
Space Requirements ........................................................................3
2.2.
Dismantling of Transport Beams and Machine Alignment ............5
2.3.
Machine Installation........................................................................5
2.4.
Connection to Energy Supplies.......................................................5
3.
Technical Data ...............................................................................6
4.
Machine Parameters .....................................................................7
5.
Machine Description ...................................................................10
5.1.
Vice ...............................................................................................10
5.1.1. Setting of Cutting Angle ...............................................................10
5.1.2. Material Clamping ........................................................................10
5.2.
Saw Blade Feed into Cutting Position ..........................................12
5.2.1. Saw Blade Feed into Cutting Position-Control valve...................12
5.3.
Hydraulic Unit...............................................................................12
5.3.1. Hydraulic Unit...............................................................................12
5.3.2. Setting of Vice Clamping Force....................................................12
5.4.
Setting of Band Saw Head Stroke Height ....................................13
5.5.
Saw Blade Guide...........................................................................14
5.6.
Saw Blade Replacement, Tension and Setting..............................14
5.7.
Guide Heads - Setting ...................................................................14
5.8.
Regulation of Saw Blade Cutting Pressure...................................16
5.9.
Control Panel.................................................................................16
5.10. Cooling System .............................................................................21
6.
Saw Blades ...................................................................................22
6.1.
Saw Blade Design .........................................................................22
6.2.
Tooth Size......................................................................................22
6.3.
Optimum Workpiece Clamping ....................................................23
6.4.
Running-in New Saw Blades ........................................................23
6.5.
Factors Influencing Saw Blade Life .............................................23
6.6.
Values Recommended for Sawing ................................................23
7.
Putting into Operation................................................................25
7.1.
Safety Control ...............................................................................25
7.2.
First Cut.........................................................................................25
8.
Machine Maintenance.................................................................25
8.1.
Maitenance and Checking.............................................................25
8.2.
Repairs...........................................................................................26
Extra Accessorie Angle calibration.......................................................26
9. Failures and their Elimination..........................................................27
Attachment to operating instructions for hydraulic unit...................28
10.
and Protective Elements .............................................................91
10.1. Wiring Diagram ARG 400 Plus S.A.F. .........................................91
ARG 500 Plus S.A.F. ....................................................................93
ARG 500 Plus S.A.F. Electronic...................................................96
11.
Assemblies ....................................................................................99
11.1. Guide Head Assembly...................................................................99
11.1.1.Guide Head Assembly ARG 380, 500 Plus S.A.F. .......................99
11.2. Bow Assembly ............................................................................100
11.2.1.Bow Assembly ARG 380, 500 Plus S.A.F..................................100
11.3. Table, Turntable, Joint & Vice Assembly ...................................102
11.3.1.Table, Turntable, Joint & Vice Assembly
ARG 380, 500 Plus S.A.F. ..........................................................102
11.3.2.Table, Turntable, Joint & Vice Assembly
11.4. Saw Blade Drive & Tensioning Mechanism Assembly..............104
ARG 380, 500 Plus S.A.F. ..........................................................104
11.4.2.Saw Blade Drive & Tensioning Mechanism Assembly
11.5. Driven Cleaning Brush Assembly...............................................105
11.6. Blade Hydraulic Tensioning Assembly (Accessories) ................106
12.
Hydraulic Diagram ...................................................................107
0. In General
This instruction manual provides the user assistance and information about
the PILOUS band saw and the possibilities of use corresponding to its pur-
pose. The instruction manual contains important instructions for safe, ade-
quate and economically efficient operation. Observing the operating
instructions will prevent hazards, reduce the repair and outage time costs,
and increase the machine reliability and life. The instruction manual con-
tains instructions based on the existing national regulations concerning pre-
vention of accidents and environmental protection. The instruction manual
must always be available at the machine site. The instruction manual must
be read and used by the staff entrusted with the machine installation, trans-
port and storage, use, operation, maintenance and disposal. In addition to
the instruction manual and the binding rules related to accident prevention
valid in the user's country and at the service site, it is also necessary to
observe the approved rules for safe and professional work.
Letter of Guarantee - Service
The Letter of Guarantee is a separate attachment to the instruction manual.
Guarantee period - see Letter of Guarantee
Conditions for Maintenance of Claims under Guarantee
• Transport and storage of the machine in conformity with the instruction
manual.
• Use and attendance of the machine in conformity with the instruction
manual.
• Connection of the machine to voltage in conformity with the instruction
manual.
The guarantee does not apply to:
• Violent and mechanical damage of the machine caused by interference of
the user or other persons.
• Unavoidable event (natural disaster).
• Damage of machine during transport.
• Storage or installation of machine in humid, chemical or any other unsu-
itable environment.
• Parts subject to wear and tear (see Letter of Guarantee ).
Any claims concerning guarantee and after-guarantee repairs should
be sent by fax, mailed or communicated by phone to the following add-
ress: refer to the Letter of Guarantee.
1
Hide quick links:
Advertisement
Chapters
Table of Contents
