3. Squeeze the tab on the socket and turn the socket
right to left.
4. Pull out the socket.
5. Pull the bulb out of the socket. (There are two bulbs
on each taillamp.)
6. Push in a new bulb.
7. Replace the socket into the housing and turn to
8. Replace the taillamp housing to the body of
9.
Install the wing nuts.
the right.
the vehicle.
10.
Tighten the plastic nuts.
Trunk Lid Applique
B
1. Open the trunk lid halfway.
2. Remove the wing nuts (A) from the studs on the
applique. (There are eight wing nuts. Pliers may be
required to remove them.)
3. Remove the applique from the trunk lid.
6-36