Advertisement
Quick Links
HMNC100_IG.fm Page 1 Thursday, February 6, 2014 9:38 AM
Installation Guide
Ocuity 100 Wireless IP Camera
HMNC100
Package Contents
Stand
IP camera
Wall anchor kit
Camera Features
Left LED
Power adapter
Right LED
Power
WPS button
USB / Ethernet
Reset
connection
Connect the IP Camera
Note:
To connect the camera, you need a router that is connected to a computer.
1.
Connect the power adapter to the camera and plug it into an electrical outlet.
2.
Connect your camera to a router.
Press the WPS button
on the side of the camera. Within two minutes,
press the WPS button on your wireless router.
®
Support
Contact your service provider for technical support.
For compliance details, visit
http://www.netgear.com/about/regulatory/.
For the current EU Declaration of Conformity, visit
http://support.netgear.com/app/answers/detail/a_id/11621/.
Advertisement
Related Manuals for NETGEAR Ocuity 100
Summary of Contents for NETGEAR Ocuity 100
- Page 1 Installation Guide Connect the power adapter to the camera and plug it into an electrical outlet. Connect your camera to a router. Ocuity 100 Wireless IP Camera Press the WPS button on the side of the camera. Within two minutes, HMNC100 press the WPS button on your wireless router.
- Page 2 NETGEAR, the NETGEAR logo, and Connect with Innovation are trademarks and/or registered trademarks of NETGEAR, Inc. and/or its subsidiaries in the United States and/or other countries. Information is subject to change without notice. © NETGEAR, Inc. All rights reserved.
Need help?
Do you have a question about the Ocuity 100 and is the answer not in the manual?
Questions and answers