Buick 1993 Skylark Owner's Manual page 96

3. Push in the set button at the end of the lever and
release it. (The "CRUISE' light on the instrument
panel will come on.)
4. Take your foot off the accelerator pedal.
You'll go right back up to your chosen speed and stay
there.
A
To Resume a Set Speed
Suppose you set your Cruise Control at a desired speed
and then you apply the brake. This, of course, shuts off
the Cruise Control. But you don't need to reset it. Once
you're going about 25 mph (40 km/h) or more, you can
move the Cruise Control switch from "ON' to
"RES/ACC" (Resume/Accelerate) for about half a
If you hold the switch at "RES/ACC"
(Resume/Accelerate) longer than half a second,
the vehicle will keep going faster until you
release the switch or apply the brake. You could
be startled and even lose control. So unless you
want to go faster, don't hold the switch at
"RES/ACC."
second.
0