Troubleshooting - Vacmaster VOC507S Operator's Manual

WARNING:

TROUBLESHOOTING.

PROBLEM
The wet/dry vacuum will not
operate.
The dust comes out from
the motor cover.
Reduced efficiency and
motor/speed vibration.
TROUBLESHOOTING
TO REDUCE THE RISK OF ELECTRIC SHOCK, UNPLUG BEFORE
POSSIBLE CAUSE
No power supply.
Faulty power cord.
Collection tank is full.
Switch in the wrong position.
The reusable cloth filter is missing
or damaged.
Vacuum has been used to collect
fine dust, such as dry wall dust,
fireplace soot, or ash, without a fine
dust filter.
There are blockages in the nozzle,
hose, or the collection tank inlets.
The reusable cloth filter is clogged
by fine dust.
Check the power supply, cord,
breakers, and fuses.
Unplug and check the power
cord. If damaged, have it
repaired by a professional.
Empty the collection tank.
Press the ON 'I' button on the
power head.
Attach or replace the reusable
cloth filter.
Remove the reusable cloth filter
and install the appropriate fine
dust filter.
Unplug and check nozzle, hose,
and collection tank inlets for
blockages.
Take off the filter and clean it
or install a new reusable cloth
filter.
14
SOLUTION