Pair Mdr-Aci And Controller - Teradek RT Quick Start Manual

PAIR MDR-ACI AND CONTROLLER

Wireless Pairing via Controller
Press the MENU button on the controller.
1
Navigate to WIRELESS>FIND RECV to scan for active receivers and automatically pair. The
2
LED on the controller will turn green once paired.
Wireless Pairing via MDR-ACI
Press the Menu button on MDR-ACI, then navigate to MDR Settings>Channel.
1
Select the same channel the controller is on to automatically pair.
2
Wired Pairing
Press the Menu button on MDR-ACI, then navigate to MDR Settings>Port IN-1 to set the mode
1
to Wired.
Connect a 5-pin connector from the controller's wired-mode input to the AUX 1 input
2
the MDR-ACI. The controller and receiver will remain paired even after disconnecting the 5-pin
connector. The LED on the controller will turn blue once paired.
7
(J)
on