Zanussi ZCI66280WA User Manual page 12

To activate the function a cooking zone
must be cold.
To activate the function for a cooking zone:
turn the knob for a cooking zone to the
shows on the display. Immediately set the
correct heat setting.
To deactivate the function: turn the knob to the
off position.
POWERBOOST
This function makes more power available to the
induction cooking zones. The function can be
activated for the induction cooking zone only for a
limited period of time. After this time the induction
cooking zone automatically sets back to the highest
heat setting.
To activate the function for a cooking zone:
touch . comes on.
To deactivate the function: change the heat
setting.
TIMER
Count Down Timer
You can use this function to set how long the
cooking zone should operate for a single cooking
session.
First set the heat setting for the cooking zone then
set the function.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
set the time (00 - 99 minutes). When the indicator
of the cooking zone starts to flash slowly the time
counts down.
To see the remaining time: set the cooking zone
with . The indicator of the cooking zone starts to
flash quickly. The display shows the remaining time.
To change the time: set the cooking zone with
. Touch or .
To deactivate the function: set the cooking zone
with and touch
back to 00. The indicator of the cooking zone goes
out.
When the time comes to an end, the
sound operates and 00 flashes. The
cooking zone deactivates.
To stop the sound: touch
12
position.
again and
of the timer to
. The remaining time counts
.
CountUp Timer
You can use this function to monitor how long the
cooking zone operates.
To set the cooking zone: touch
again until the indicator of a necessary cooking
zone comes on.
To activate the function: touch
comes on. When the indicator of the cooking
zone starts to flash slowly the time counts up. The
display switches between
(minutes).
To see how long the cooking zone operates:
set the cooking zone with
cooking zone starts to flash quickly. The display
shows how long the zone operates.
To deactivate the function: set the cooking zone
with and touch
cooking zone goes out.
Minute Minder
You can use this function as a Minute Minder
when the hob is activated and the cooking zones
do not operate. The heat setting display shows
To activate the function: touch
of the timer to set the time. Cooking zones
display deactivates automatically after 10 seconds.
When the time comes to an end, the sound
operates and 00 flashes.
To stop the sound: touch
To deactivate the function: activate for a short
time and deactivate left front cooking zone.
The function has no effect on the
operation of the cooking zones.
PAUSE
The function does not stop the timer functions.
Touch to activate the function.
comes on. The heat setting is lowered to 1.
To deactivate the function, touch
previous heat setting comes on.
If you change the heat setting, the
function stops and the display shows
the new heat setting.
LOCK
You can lock the sensors on the hob while cooking
zones operate.
again and
of the timer.
and counted time
. The indicator of the
or . The indicator of the
. Touch
.
. The
.
or