Section 10: Connect The Command Centre - Zenith HydroTap G5 Quick Start Installation Manual

Generic installation instructions
For HydroTap, mixer tap and any optional accessories, use
instructions supplied with individual kit components.
Mains power cable
Do not connect to the mains
socket until commissioning
Installation diagrams are for illustrative purposes only. Hoses are
!
not shown to scale and cannot be lengthened.
Tips for hose connection
• Push the silicone hose over the
connector for a minimum of 15mm.
• Ensure there a constant fall from the
tap down to the command centre.
• Hoses must be trimmed to avoid
loops and kinks. Take care when
positioning before cutting and make
a clean cut straight across the hose,
using a sharp blade.
• The hoses must not be under tension
when installed.
Quick Start Installation Guide
20
807120NZ v1.00 01.21 G5 C CS Quick Start Guide
C res

SECTION 10: Connect the Command Centre

MAINS CHILLED
IN OUTLET
USB
CS75 res
MAINS CHILLED
IN OUTLET
Tap
HydroTap
SPARKLING CO
2
OUTLET IN
Command
Centre
USB
Braided hose
CO2
USB
Connections key