Table of Contents
Advertisement
Moving manually*
In the event of an electrical malfunction, you can
move the sunroof manually:
1.
Remove trim piece. To do so, gently lift the
corner of the trim piece with a screwdriver.
2.
Using the screwdriver, press in the clamps
one after the other, arrows 1, tilt the cover
panel down, arrow 2, and remove.
3.
Release and disconnect the motor plug.
This significantly reduces the effort
required for the manual movement.
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG
4.
Take the Allen wrench
the onboard tool kit, refer to page 245, and
insert it into the opening provided. Move the
glass sunroof in the desired direction.
5.
Reconnect the plug.
6.
Clip the trim piece into the cover panel,
arrow 1. Then fold the cover panel forward
until it audibly clicks into place, arrow 2.
*
from its bracket in
41
Advertisement
Table of Contents
