BMW 2008 X6 Owner's Manual page 121

Table of Contents

Advertisement

In the rear console
Slide the cover back.
Access to socket:
Pull off the cover.
Rear center armrest
Pull on the loop and fold down the center arm-
rest.
Cargo bay
Cargo bay cover
Deploy cargo bay cover by pulling back.
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG
Do not place heavy or hard objects on the
cargo bay cover. If you do so, they may
pose a danger to vehicle occupants during
braking or evasive
maneuvers.<
Removing
1.
Grasp retracted cargo bay cover under-
neath the upper fold on both sides.
2.
Pull the cover back out of the side brackets.
3.
Depending on your vehicle's equipment
package, you can store the cover under the
floor panel in the cargo bay.
Installing
When installing, proceed in the opposite order
of removal.
1.
Set the cargo bay cover into place on the
left and right sides.
2.
Lift the back of the cover slightly and slide
forward until it snaps into the two side
brackets.
119

Advertisement

Table of Contents
loading

This manual is also suitable for:

2008 x6 xdrive 35i

Table of Contents