Table of Contents
Advertisement
Mounting/removing snap-in
adapter
1.
Press the area 1 around the button and
*
remove the cover
.
2.
Insert the snap-in adapter at the front and
press down until it engages.
To remove the snap-in adapter:
Press down on region 1.
220
Online Edition for Part no. 01 41 0 015 021 - © 11/07 BMW AG
Inserting mobile phone
1.
Remove the protective cap from the mobile
phone's antenna connector if necessary, so
that the mobile phone can engage in the
snap-in adapter.
2.
Push the mobile phone with the buttons
facing upward toward the electrical connec-
tions and press down until it engages.
The mobile phone battery is charged from the
radio readiness position.
To protect the vehicle's batteries, avoid
using the phone when the ignition is
switched
off.<
Removing mobile phone
Press the button.
Advertisement
Table of Contents
